Nissan Maxima. Manual — part 1025
REAR SEAT
SE-73
< REMOVAL AND INSTALLATION >
[WITH CLIMATE CONTROLLED SEATS]
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
Removal and Installation
INFOID:0000000009468149
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
SEAT CUSHION ASSEMBLY
Removal
1. Locate the seat cushion lock (2) at the front bottom of the seat
cushion assembly (one for each side). Pull the release lever (A)
forward and lift the seat cushion assembly upward to release the
seat cushion wire (1) from the seat cushion lock (2).
: Front
2. Then pull the seat cushion assembly forward to remove.
Installation
Installation is in the reverse order of removal.
SEATBACK
Removal
1. Lock seatback (LH/RH) in upright position.
2. Remove the seatback hinge assembly bolts and nut.
3. Fold seatback (LH/RH) forward.
4. Remove seatback latch covers (A).
5. Remove the halo upper frame assembly bolts (B).
6. Remove the seatback assembly.
7.
Installation
13. Seatback assembly (LH)
14. Seatback latch striker (LH)
15. Seatback frame (LH)
16. Seatback pad (LH)
17. Seatback trim (LH)
18. Seatback frame (RH)
19. Side bolster pad (LH)
20. Side bolster trim (LH)
21. Seat belt guide (LH)
22. Seatback latch assembly
23. Seatback latch cover
24. Side bolster pad (RH)
25. Side bolster trim (RH)
26. Seat belt guide (RH)
27. Seatback assembly (RH)
28. Headrest holder (locked)
29. Headrest holder (free)
30. Headrest
ALJIA0949ZZ
ALIIA0328ZZ
ALIIA0329ZZ
SE-74
< REMOVAL AND INSTALLATION >
[WITH CLIMATE CONTROLLED SEATS]
REAR SEAT
Installation is in the reverse order of removal.
CLIMATE CONTROLLED SEAT BLOWER FILTER
SE-75
< REMOVAL AND INSTALLATION >
[WITH CLIMATE CONTROLLED SEATS]
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
CLIMATE CONTROLLED SEAT BLOWER FILTER
Removal and Installation
INFOID:0000000009468150
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove front seat. Refer to
SE-68, "Removal and Installation"
.
2. Turn blower filter counter clockwise and remove it from climate controlled seat blower motor.
INSTALLATION
Installation is in the reverse order of removal.
SE-76
< UNIT DISASSEMBLY AND ASSEMBLY >
[WITH CLIMATE CONTROLLED SEATS]
FRONT SEAT
UNIT DISASSEMBLY AND ASSEMBLY
FRONT SEAT
DRIVER SIDE
DRIVER SIDE : Exploded View
INFOID:0000000009468151
Driver Seat - With Climate Controlled Seats
AWJIA0925ZZ
1.
Seatback board
2.
Seatback board clip
3.
Seat cushion lower rear finisher
4.
Seat harness
5.
Seat cushion inner finisher inside
(RH)
6.
Recline mechanism inner cover
7.
Seat cushion outer finisher (RH)
8.
Seat belt buckle
9.
Seat cushion assembly
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст