Nissan Maxima. Manual — part 128
AV-332
< REMOVAL AND INSTALLATION >
[COLOR DISPLAY - W/O BOSE]
TEL ANTENNA
TEL ANTENNA
Removal and Installation
INFOID:0000000010064946
REMOVAL
1. Disconnect the battery negative terminal. Refer to
PG-68, "Removal and Installation (Battery Tray)"
2. Remove the rear parcel shelf finisher. Refer to
INT-28, "Removal and Installation"
.
3. Remove the Bluetooth antenna screw (A).
4. Detach the Bluetooth antenna harness clip (B).
5. Fold down the rear seat (if equipped) or open the trunk lid, then
detach the Bluetooth antenna harness clip (C).
6. Disconnect the harness connector (D) from the Bluetooth
antenna (1) and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1144ZZ
AV
BLUETOOTH CONTROL UNIT
AV-333
< REMOVAL AND INSTALLATION >
[COLOR DISPLAY - W/O BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BLUETOOTH CONTROL UNIT
Removal and Installation
INFOID:0000000010064947
REMOVAL
1. Disconnect the battery negative terminal.
2. Remove the trunk upper finisher. Refer to
3. Remove the parcel shelf finisher. Refer to
INT-28, "Removal and Installation"
4. From inside the passenger compartment, remove the bracket screws and lower the assembly for access.
5. Remove the Bluetooth control unit screws (A).
6. Disconnect the Bluetooth control unit connectors (B) and
remove the Bluetooth control unit (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1154ZZ
AV-334
< REMOVAL AND INSTALLATION >
[COLOR DISPLAY - W/O BOSE]
REAR VIEW CAMERA
REAR VIEW CAMERA
Removal and Installation
INFOID:0000000010064948
REMOVAL
1. Remove the license plate finisher. Refer to
EXL-166, "Removal and Installation"
2. Remove trunk lid finisher. Refer to
.
3. Disconnect the rear view camera connector (B), press the rear
view camera tab (A) and remove the rear view camera (1).
INSTALLATION
Installation is in the reverse order of removal.
Adjustment
INFOID:0000000010064949
REAR VIEW CAMERA
For adjustment on the rear view camera, refer to
DLK-12, "ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT : Special Repair Requirement"
.
ALNIA1156ZZ
AV
DIAGNOSIS AND REPAIR WORKFLOW
AV-335
< BASIC INSPECTION >
[COLOR DISPLAY - W/ BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000009471278
OVERALL SEQUENCE
• Reference 1··· Refer to
AV-359, "CONSULT Function (MULTI AV)"
• Reference 2··· Refer to
DETAILED FLOW
1.
CHECK SYMPTOM
Check the malfunction symptoms by performing the following items.
• Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred).
• Check the symptom.
>> GO TO 2
2.
SELF-DIAGNOSIS (CONSULT)
1. Connect CONSULT and perform “SELF-DIAGNOSIS” for “MULTI AV”.
NOTE:
Skip to step 4 of the diagnosis procedure if “MULTI AV” is not displayed.
2. Check if any DTC No. is displayed in the self-diagnosis results.
AWNIA2486GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст