Nissan Maxima. Manual — part 599
EXL-138
< WIRING DIAGRAM >
[XENON TYPE]
BACK-UP LAMP
ABLIA0530GB
BACK-UP LAMP
EXL-139
< WIRING DIAGRAM >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
ABLIA1723GB
EXL-140
< SYMPTOM DIAGNOSIS >
[XENON TYPE]
EXTERIOR LIGHTING SYSTEM SYMPTOMS
SYMPTOM DIAGNOSIS
EXTERIOR LIGHTING SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000010050255
CAUTION:
Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagno-
sis if any DTC is detected.
Symptom
Possible cause
Inspection item
Head lamp does not
switch to the high beam.
One side
• Fuse
• Harness between IPDM E/R
and the front combination lamp
• Front combination lamp
(High beam relay)
• IPDM E/R
Head lamp (HI) circuit.
Refer to
.
Both sides
Symptom diagnosis
“BOTH SIDE HEADLAMPS DO NOT SWITCH TO HIGH BEAM”
Refer to
High beam indicator lamp is not turned ON.
(Head lamp switches to the high beam.)
• Combination meter
• BCM
• Combination meter.
Data monitor “HI-BEAM IND”.
• BCM (HEAD LAMP).
Active test “HEADLAMP”.
Headlamp does not
switch to the low beam.
One side
Front combination lamp (Low
beam relay)
—
Both sides
• Combination switch (lighting
and turn signal switch)
• Harness between the combina-
tion switch (lighting and turn sig-
nal switch) and BCM
• BCM
Combination switch (lighting and
turn signal switch).
Refer to
.
High beam request signal
• BCM
• IPDM E/R
IPDM E/R.
Data monitor "HL HI REQ".
IPDM E/R
—
Headlamp does not turn
ON.
One side
• Fuse
• Bulb
• Harness between IPDM E/R
and the front combination lamp
• Front combination lamp
• IPDM E/R
Headlamp (LO) circuit.
Refer to
.
Both sides
Symptom diagnosis
"BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON"
Refer to
.
Headlamp does not turn
OFF.
When the ignition
switch is turned ON
• BCM
• Combination switch (lighting
and turn signal switch)
Combination switch (lighting and
turn signal switch).
Refer to
.
The ignition switch is
turned OFF (After acti-
vating the battery sav-
er).
IPDM E/R
—
EXTERIOR LIGHTING SYSTEM SYMPTOMS
EXL-141
< SYMPTOM DIAGNOSIS >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Headlamp is not turned ON/OFF with the lighting
switch AUTO.
• Combination switch (lighting
and turn signal switch)
• Harness between the combina-
tion switch (lighting and turn sig-
nal switch) and BCM
• BCM
Combination switch (lighting and
turn signal switch).
Refer to
.
• Optical sensor
• Harness between the optical
sensor and BCM
• BCM
Optical sensor.
Refer to
.
Daytime light system does not activate.
• Either high beam bulb
• Parking brake switch
• Combination switch (lighting
and turn signal switch)
• BCM
• IPDM E/R
• Daytime light relay
• Harness between IPDM E/R
and daytime light relay.
Daytime light system description.
Refer to
.
Front fog lamp is not
turned ON.
One side
• Front fog lamp bulb
• Harness between IPDM E/R
and the front combination lamp
• Front combination lamp
• IPDM E/R
Front fog lamp circuit.
Refer to
.
Both side
Symptom diagnosis
"BOTH SIDE FRONT FOG LAMPS ARE NOT TURNED ON"
Refer to
Parking lamp is not turned
ON.
One side
• Fuse
• Parking lamp bulb
• Harness between IPDM E/R
and the front/rear combination
lamp
• Front/rear combination lamp
• IPDM E/R
Parking lamp circuit.
Refer to
.
Both sides
Symptom diagnosis
"PARKING, LICENSE PLATE AND TAIL LAMPS ARE NOT TURNED
ON".
Refer to
Turn signal lamp does not
blink.
Indicator lamp is nor-
mal.
(The applicable side
performs the high flash-
er activation).
• Harness between BCM and
each turn signal lamp
• Turn signal lamp bulb
• Door mirror (if equipped with
turn signals in the door mirrors)
Turn signal lamp circuit.
Refer to
.
Turn signal indicator lamp
does not blink.
One side
Combination meter
—
Both sides
(Always)
• Turn signal indicator lamp sig-
nal
• Combination meter
• BCM
• Combination meter.
Data monitor "TURN IND".
• BCM (FLASHER).
Active test "FLASHER".
Both sides
(Does blink when acti-
vating the hazard warn-
ing lamp with the
ignition switch OFF)
• The combination meter power
supply and the ground circuit
• Combination meter
Combination meter.
Power supply and the ground circuit
Refer to
.
• Hazard warning lamp does not activate.
• Hazard warning lamp continues activating. (Turn
signal is normal)
• Hazard switch
• Harness between the hazard
switch and BCM
• BCM
Hazard switch
Refer to
.
Symptom
Possible cause
Inspection item
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст