Nissan Maxima. Manual — part 1029
FRONT SEAT
SE-89
< UNIT DISASSEMBLY AND ASSEMBLY >
[WITH CLIMATE CONTROLLED SEATS]
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
• When installing the seatback trim, firmly push down while sliding
your hand along the seams as shown (arrow) to ensure the velcro
fasteners are fastened properly.
• Make sure the chute rod is properly positioned and installed as shown.
: Front
• Make sure the side air bag outer chute (7) is pulled over the side
air bag module (3) and the side air bag inner chute (4) is pulled
around the frame (2). Make sure there are no wrinkles and the
chutes are not folded, twisted or pinched.
(1) Seatback pad
(5) Chute rod
(6) Seatback board
: Front
CAUTION:
• If a malfunction was detected by the air bag warning lamp, after repair or replacement of the mal-
function parts, reset the memory using self-diagnosis or CONSULT.
• After work is completed, check that no system malfunction is detected by air bag warning lamp.
• Make sure side air bag module shell is closed at all tabs and cushion of module is not exposed. Do
not reuse if the tab of shell is not secured.
• Always install new side air bag module attaching nuts and side air bag chute rod bolts.
• Always route side air bag module harness in original location. Replace any deformed or damaged
clips with the same type and color. Always install clips in the original location on the harness.
• Smooth out all wrinkles during assembly.
ALJIA0656ZZ
ALJIA0654ZZ
ALJIA0655ZZ
SE-90
< UNIT DISASSEMBLY AND ASSEMBLY >
[WITH CLIMATE CONTROLLED SEATS]
FRONT SEAT
• Inspect seatback pad, trim cover and trim cover chutes. Replace if damaged.
• Replace any deformed or damaged parts.
• Replace any deformed or damaged hog rings. Ensure any old hog ring pieces are removed from
seat.
• Use only one hog ring in each designated location.
• Ensure hog rings are correctly fastened around both the seatback trim and seatback pad trim wires.
NOTE:
Use NISSAN standard hog rings and tools to assemble.
REAR SEAT
SE-91
< UNIT DISASSEMBLY AND ASSEMBLY >
[WITH CLIMATE CONTROLLED SEATS]
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
REAR SEAT
Exploded View - Fixed Seatback
INFOID:0000000009468155
Exploded View - 60:40 Split Seatback
INFOID:0000000009468156
1.
Headrest
2.
Headrest holder (free)
3.
Headrest holder (locked)
4.
Bumper
5.
Seatback assembly
6.
Seatback trim
7.
Seatback pad
8.
Seat cushion trim
9.
Seat cushion pad
10. Seat cushion wire cover
11. Seat cushion lock
12. Seat cushion assembly
AWJIA0941ZZ
SE-92
< UNIT DISASSEMBLY AND ASSEMBLY >
[WITH CLIMATE CONTROLLED SEATS]
REAR SEAT
1.
Seatback latch striker (RH)
2.
Seatback trim (RH)
3.
Seatback pad (RH)
4.
Armrest assembly
5.
Inner armrest bracket (RH)
6.
Inner armrest bracket (LH)
7.
Seat cushion assembly
8.
Seat cushion trim
9.
Seat cushion pad
10. Seat cushion wire cover
11. Seat cushion lock
12. Seatback hinge assembly
13. Seatback assembly (LH)
14. Seatback latch striker (LH)
15. Seatback frame (LH)
16. Seatback pad (LH)
17. Seatback trim (LH)
18. Seatback frame (RH)
AWJIA0939ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст