Nissan Leaf. Manual — part 592
EVC-392
< DTC/CIRCUIT DIAGNOSIS >
IMMEDIATE CHARGING SWITCH
NO
>> Replace immediate charging switch. Refer to
VC-145, "Removal and Installation"
Component Inspection (Immediate Charging Switch)
INFOID:0000000010120847
1.
CHECK IMMEDIATE CHARGING SWITCH
1. Turn power switch OFF.
2. Disconnect immediate charging switch harness connector.
3. Check the continuity between immediate charging switch terminals under the following conditions.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace immediate charging switch. Refer to
VC-145, "Removal and Installation"
Terminals
Condition
Continuity
6 and 8
Immediate
charging switch
Released
Not existed
Pressed
Existed
CHARGING CONNECTOR LOCK
EVC-393
< DTC/CIRCUIT DIAGNOSIS >
D
E
F
G
H
I
J
K
L
M
A
B
EVC
N
O
P
CHARGING CONNECTOR LOCK
Component Function Check
INFOID:0000000010120848
1.
CHARGE CONNECTOR LOCK FUNCTION CHECK
1. Press the charge connector lock switch at the “OFF” position.
2. Turn power switch OFF.
3. Connect EVSE.
4. Switch the charge connector lock switch to “LOCK” position.
5. Check that the charge connector lock operates normally.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Proceed to
EVC-393, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000010120849
1.
CHECK CHARGE CONNECTOR LOCK SWITCH RELATED CIRCUIT
Check charge connector lock switch related circuit. Refer to
EVC-397, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace error-detected parts.
2.
CHECK CHARGE CONNECTOR LOCK RELAY RELATED CIRCUIT
Check charge connector lock relay related circuit. Refer to
EVC-376, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace error-detected parts.
3.
CHECK CHARGE CONNECTOR LOCK ACTUATOR
Check charge connector lock actuator. Refer to
EVC-393, "Component Inspection (Charge Connector Lock
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace charge connector lock actuator. Refer to
VC-142, "Removal and Installation"
4.
CHECK CHARGE CONNECTOR LOCK ACTUATOR CONTROL CIRCUIT
1. Disconnect VCM harness connector.
2. Check the continuity between VCM harness connector and charge connector lock actuator harness con-
nector.
3. Also check harness for short to ground and short to power.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Repair or replace error-detected parts.
Component Inspection (Charge Connector Lock Actuator)
INFOID:0000000010120850
1.
CHECK CHARGE CONNECTOR LOCK ACTUATOR
1. Turn power switch OFF.
+
−
Continuity
VCM
Charge connector lock actu-
ator
Connector
Terminal
Connector
Terminal
E123
117
E126
1
Existed
130
3
EVC-394
< DTC/CIRCUIT DIAGNOSIS >
CHARGING CONNECTOR LOCK
2. Remove charge connector lock actuator. Refer to
VC-142, "Removal and Installation"
.
3. Check the resistance between charge connector lock actuator connector terminals.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace charge connector lock actuator. Refer to
VC-142, "Removal and Installation"
Charge connector lock actuator
Resistance
+
−
Terminal
1
3
2 – 4
Ω
CHARGE PORT LID OPENER
EVC-395
< DTC/CIRCUIT DIAGNOSIS >
D
E
F
G
H
I
J
K
L
M
A
B
EVC
N
O
P
CHARGE PORT LID OPENER
Component Function Check
INFOID:0000000010120851
1.
CHARGE PORT LID OPENER FUNCTION CHECK
1. Close charge port lid.
2. Press charge port lid opener switch.
Does the charge port lid open?
YES
>> INSPECTION END
NO
>> Proceed to
EVC-395, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000010120852
1.
CHECK CHARGE PORT LID OPENER ACTUATOR RELAY RELATED CIRCUIT
Check charge port lid opener actuator relay related circuit. Refer to
EVC-379, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace error-detected parts.
2.
CHECK CHARGE PORT LID OPENER ACTUATOR
Check charge port lid opener actuator. Refer to
EVC-396, "Component Inspection (Charge Port Lid Opener
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace charge port lid opener actuator. Refer to
DLK-191, "CHARGE PORT LID OPENER
ACTUATOR : Removal and Installation"
.
3.
CHECK CHARGE PORT LID OPENER ACTUATOR CONTROL CIRCUIT
1. Check the continuity between charge port lid opener actuator relay harness connector and charge port lid
opener actuator harness connector.
2. Also check harness for short to ground and short to power.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace error-detected parts.
4.
CHECK CHARGE PORT LID OPENER ACTUATOR GROUND CIRCUIT
Check the continuity between charge port lid opener actuator harness connector and ground.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Repair or replace error-detected parts.
+
−
Continuity
Charge port lid opener actu-
ator relay
Charge port lid opener actu-
ator
Connector
Terminal
Connector
Terminal
E127
3
E128
3
Existed
+
−
Continuity
Charge port lid opener actuator re-
lay
Connector
Terminal
E88
2
Ground
Existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст