Nissan Leaf. Manual — part 593
EVC-396
< DTC/CIRCUIT DIAGNOSIS >
CHARGE PORT LID OPENER
Component Inspection (Charge Port Lid Opener Actuator)
INFOID:0000000010120853
1.
CHECK CHARGE PORT LID OPENER ACTUATOR
1. Turn power switch OFF.
2. Remove charge port lid opener actuator. Refer to
DLK-191, "CHARGE PORT LID OPENER ACTUATOR :
.
3. Check the resistance between charge port rid opener actuator connector terminals.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace charge port lid opener actuator. Refer to
DLK-191, "CHARGE PORT LID OPENER
ACTUATOR : Removal and Installation"
Charge port lid opener actuator
Resistance
+
−
Terminal
1
2
1 – 4
Ω
CHARGING CONNECTOR LOCK SWITCH
EVC-397
< DTC/CIRCUIT DIAGNOSIS >
D
E
F
G
H
I
J
K
L
M
A
B
EVC
N
O
P
CHARGING CONNECTOR LOCK SWITCH
Diagnosis Procedure
INFOID:0000000010120854
1.
CHARGE CONNECTOR LOCK SWITCH ILLUMINATION LAMP FUNCTION CHECK-1
1. Turn power switch ON.
2. Turn ON the headlamp.
3. Check that the charge connector lock switch illumination lamp lights up.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> GO TO 2.
2.
CHECK CHARGE CONNECTOR LOCK SWITCH ILLUMINATION LAMP POWER SUPPLY
Check the voltage between charge connector lock switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> GO TO 3.
3.
CHECK FUSE
1. Turn power switch OFF.
2. Turn OFF the headlamp.
3. Pull out the #46 fuse.
4. Check that the fuse is not fusing.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace the fusible link after repairing the applicable circuit.
4.
CHECK CHARGE CONNECTOR LOCK SWITCH ILLUMINATION LAMP POWER SUPPLY CIRCUIT
1. Disconnect charge connector lock switch harness connector.
2. Check the continuity between charge connector lock switch harness connector and fuse terminal.
Is the inspection result normal?
YES
>> Check power supply circuit.
NO
>> Repair or replace error-detected parts.
5.
CHECK CHARGE CONNECTOR LOCK SWITCH GROUND CIRCUIT
1. Turn power switch OFF.
2. Turn OFF the headlamp.
3. Disconnect charge connector lock switch harness connector.
4. Check the continuity between charge connector lock switch harness connector and ground.
+
−
Voltage
Charge connector lock switch
Connector
Terminal
M113
2
ground
12V battery volt-
age
+
−
Continuity
Charge connector lock switch
Connector
Terminal
M94
2
#46 fuse termi-
nal
Existed
EVC-398
< DTC/CIRCUIT DIAGNOSIS >
CHARGING CONNECTOR LOCK SWITCH
Is the inspection result normal?
YES
>> Replace charge connector lock switch. Refer to
VC-146, "Removal and Installation"
NO
>> Repair or replace error-detected parts.
6.
CHARGE CONNECTOR LOCK SWITCH ILLUMINATION LAMP FUNCTION CHECK-2
1. Turn OFF the headlamp.
2. Press charge connector lock switch at the “LOCK” position.
3. Check that the “LOCK” lights up.
Is the inspection result normal?
YES
>> GO TO 12.
NO
>> GO TO 7.
7.
CHECK CHARGE CONNECTOR LOCK SWITCH ILLUMINATION LAMP POWER SUPPLY
Check the voltage between charge connector lock switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 10.
NO
>> GO TO 8.
8.
CHECK FUSE
1. Turn power switch OFF.
2. Pull out #12 fuse.
3. Check that the fuse is not fusing.
Is the inspection result normal?
YES
>> GO TO 9.
NO
>> Replace the fuse after repairing the applicable circuit.
9.
CHECK CHARGE CONNECTOR LOCK SWITCH ILLUMINATION LAMP POWER SUPPLY CIRCUIT
1. Disconnect charge connector lock switch harness connector.
2. Check the continuity between charge connector lock switch harness connector and fuse terminal.
Is the inspection result normal?
YES
>> Check power supply circuit.
NO
>> Repair or replace error-detected parts.
10.
CHECK CHARGE CONNECTOR LOCK SWITCH INDICATOR CIRCUIT
1. Turn power switch OFF.
2. Disconnect charge connector lock switch harness connector.
3. Disconnect VCM harness connector.
+
−
Continuity
Charge connector lock switch
Connector
Terminal
M94
4
Ground
Existed
+
−
Voltage
Charge connector lock switch
Connector
Terminal
M94
10
Ground
12V battery volt-
age
+
−
Continuity
Charge connector lock switch
Connector
Terminal
M94
10
#12 fuse termi-
nal
Existed
CHARGING CONNECTOR LOCK SWITCH
EVC-399
< DTC/CIRCUIT DIAGNOSIS >
D
E
F
G
H
I
J
K
L
M
A
B
EVC
N
O
P
4. Check the continuity between charge connector lock switch and VCM harness connector.
5. Also check harness for short to ground and short to power.
Is the inspection result normal?
YES
>> GO TO 11.
NO
>> Repair or replace error-detected parts.
11.
CHECK VCM GROUND CIRCUIT
Check the continuity between VCM harness connector and ground.
Is the inspection result normal?
YES
>> Replace charge connector lock switch. Refer to
VC-146, "Removal and Installation"
NO
>> Repair or replace error-detected parts.
12.
CHARGE CONNECTOR LOCK SWITCH ILLUMINATION LAMP FUNCTION CHECK-3
1. Press charge connector lock switch at the “AUTO” position.
2. Check that the “AUTO” lights up.
Is the inspection result normal?
YES
>> GO TO 18.
NO
>> GO TO 13.
13.
CHECK CHARGE CONNECTOR LOCK SWITCH ILLUMINATION LAMP POWER SUPPLY
Check the voltage between charge connector lock switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 16.
NO
>> GO TO 14.
14.
CHECK FUSE
1. Turn power switch OFF.
2. Pull out #12 fuse.
3. Check that the fuse is not fusing.
Is the inspection result normal?
YES
>> GO TO 15.
NO
>> Replace the fuse after repairing the applicable circuit.
+
−
Continuity
Charge connector lock
switch
VCM
Connector
Terminal
Connector
Terminal
M94
1
E62
87
Existed
+
−
Continuity
VCM
Connector
Terminal
E61
58
Ground
Existed
65
E62
118
126
+
−
Voltage
Charge connector lock switch
Connector
Terminal
M94
10
Ground
12V battery volt-
age
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст