Nissan Leaf. Manual — part 875
LUGGAGE FLOOR TRIM
INT-45
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
1. Apply protective tape (A) on the parts to protect it from damage.
2. Disengage shock absorber mask fixing pawls with a suitable tool
(A), and then remove shock absorber mask.
INSTALLATION
Install in the reverse order of removal.
JMJIA6961ZZ
: Pawl
JMJIA6983ZZ
INT-46
< REMOVAL AND INSTALLATION >
BACK DOOR TRIM
BACK DOOR TRIM
Exploded View
INFOID:0000000010119689
BACK DOOR UPPER FINISHER
BACK DOOR UPPER FINISHER : Removal and Installation
INFOID:0000000010119690
CAUTION:
• When removing, always use a suitable tool that is made of plastic to prevent damage to the parts.
• Never damage the back door panel.
REMOVAL
1. Fully open back door.
2. Remove back door upper finisher.
1.
Back door side finisher RH
2.
Back door upper finisher
3.
Back door side finisher LH
4.
Back door lower finisher
5.
Back door pull handle
6.
Emergency lid
: Clip
: Pawl
: Metal clip
JMJIA5053ZZ
BACK DOOR TRIM
INT-47
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
a. Apply protective tape (A) on the parts to protect it from damage.
b. Disengage back door upper finisher fixing clips and pawls with a
suitable tool (A), and then remove back door upper finisher.
INATALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
When installing, check in advance that clips and pawls are accurately aligned with the holes on back
door side, and then install by pressing in.
BACK DOOR SIDE FINISHER
BACK DOOR SIDE FINISHER : Removal and Installation
INFOID:0000000010119691
CAUTION:
• When removing, always use a suitable tool that is made of plastic to prevent damage to the parts.
• Never damage the back door panel.
REMOVAL
1. Remove strap from back door side finisher hook.
2. Remove back door upper finisher. Refer to
INT-46, "BACK DOOR UPPER FINISHER : Removal and
.
3. Remove back door side finisher.
a. Pull back door side finisher from vehicle inside to outside, and
then remove back door side finisher fixing clip.
JMJIA6962ZZ
: Clip
: Pawl
JMJIA6984ZZ
: Clip
JMJIA7220ZZ
INT-48
< REMOVAL AND INSTALLATION >
BACK DOOR TRIM
b. Pull back door side finisher, and then remove back door side fin-
isher fixing pawl and clip.
INSTALATION
Note the following item, and install in the reverse order of removal.
CAUTION:
When installing, check in advance that clip are accurately aligned with the holes on back door side,
and then install by pressing in.
BACK DOOR PULL HANDLE
BACK DOOR PULL HANDLE : Removal and Installation
INFOID:0000000010119692
CAUTION:
• When removing, always use a suitable tool that is made of plastic to prevent damage to the parts.
• Never damage the back door panel.
REMOVAL
1. Fully open back door.
2. Remove back door pull handle.
a. Apply protective tape (A) on the parts to protect it from damage.
b. Disengage back door pull handle fixing pawls with a suitable tool
(A), and then remove back door pull handle.
INSTALATION
Install in the reverse order of removal.
BACK DOOR LOWER FINISHER
BACK DOOR LOWER FINISHER : Removal and Installation
INFOID:0000000010119693
CAUTION:
• When removing, always use a suitable tool that is made of plastic to prevent damage to the parts.
: Clip
: Pawl
JMJIA7221ZZ
JMJIA6964ZZ
: Pawl
JMJIA6986ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст