Nissan Leaf. Manual — part 1101
PRECAUTIONS
SRC-5
< PRECAUTION >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
If the battery is removed within 5 minutes after the power switch is turned OFF, plural DTCs may be
detected.
4. Remove 12V battery within 1 hour after turning the power switch OFF
→ ON → OFF.
NOTE:
• The 12V battery automatic charge control may start automatically even when the power switch is in
OFF state.
• Once the power switch is turned ON
→ OFF, the 12V battery automatic charge control does not start for
approximately 1 hour.
CAUTION:
• After all doors (including back door) are closed, if a door (including back door) is opened before
battery terminals are disconnected, start over from Step 1.
• After turning the power switch OFF, if “Remote A/C” is activated by user operation, stop the air
conditioner and start over from Step 1.
SRC-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000010122780
A.
View with door finisher removed
B.
Behind center pillar lower garnish
C.
View with headlining assembly
removed
D.
View with center console assembly
removed
E.
Passenger seat
F.
View with charge port lid open
ALHIA0394GB
COMPONENT PARTS
SRC-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
No.
Component
Function
1.
Combination meter (air bag, belt warning
lamp)
Refer to
SR-12, "MAIN COMPONENT PARTS AND FUNCTIONS : Air bag
.
2.
Combination switch (spiral cable)
Refer to
SR-11, "MAIN COMPONENT PARTS AND FUNCTIONS : Spiral ca-
3.
Driver air bag module
Refer to
SR-7, "AIR BAG MODULE : Driver air bag module"
.
4.
Front passenger air bag OFF indicator
Turns the front passenger air bag OFF indicator lamp ON when the front
passenger seat is occupied by a child or a child-seat
5.
Passenger air bag module
Refer to
SR-7, "AIR BAG MODULE : Passenger air bag module"
.
6.
Front door satellite sensor LH
Refer to
SR-11, "MAIN COMPONENT PARTS AND FUNCTIONS : Satellite
7.
Front LH seat belt pre-tensioner
Refer to
SB-8, "Seat belt pre-tensioner with Load limiter"
8.
LH side air bag (satellite sensor)
Refer to
SR-11, "MAIN COMPONENT PARTS AND FUNCTIONS : Satellite
9.
Lap seat belt pre-tensioner (driver side)
Refer to
SB-9, "Double pre-tensioner seat belt"
.
10.
LH side front curtain air bag module
Refer to
SR-8, "AIR BAG MODULE : Curtain air bag module"
.
11.
Air bag diagnosis sensor unit
Refer to
SR-12, "MAIN COMPONENT PARTS AND FUNCTIONS : Air bag
12.
RH side front curtain air bag module
Refer to
SR-10, "INFLATOR : Side air bag inflator"
13.
Occupant classification system control unit
Transmits the passenger seat status (occupied or empty) to air bag
diagnosis sensor unit. It is installed in the passenger seat cushion.
Refer to
SE-11, "HEATED SEAT SYSTEM : Component Parts Location"
for
detailed installation location.
14.
Seat belt buckle switch (passenger side)
Controls deployment timing depending on the seat belt condition that is
fastened or unfastened. It is installed in the seat belt buckle.
Refer to
for detailed installation location.
15.
Crash zone sensor
Refer to
SRC-8
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM
System Description
INFOID:0000000010122781
SYSTEM DIAGRAM
DESCRIPTION
Supplemental Restraint System (SRS) activates the air bag module and seat belt pre-tensioner when it
detects a frontal collision or a side collision that is more than the specified limit.
Together with other safety devices, it reduces the impact that occupant receives when vehicle collision occurs.
Air bag diagnosis sensor unit supplies power supply to air bag module and pre-tensioner seat belt when decel-
eration that is more than the specified limit is detected by G sensor in air bag diagnosis sensor unit, crash
zone sensor, satellite sensor, or front door satellite sensor.
Air bag module is composed of electric igniter (squib), filter, pyrotechnic material, and gas generating material.
When air bag module receives a signal from air bag diagnosis sensor unit, air bag module ignites pyrotechnic
material using electric igniter (squib) so that gas generating material generates high temperature nitrogen gas.
The gas through filter activates air bag. At the same time, pre-tensioner seat belt receives power supply from
air bag diagnosis sensor unit, gas generator is activated, and then gas is generated.
Balls in pipe are moved according to generated gas pressure and strike pinion gear on ELR shaft.
ELR shaft rotates and retracts seat belt.
ALHIA0393GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст