Nissan Leaf. Manual — part 428
OUTSIDE KEY ANTENNA
DLK-207
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
OUTSIDE KEY ANTENNA
DRIVER SIDE
DRIVER SIDE : Removal and Installation
INFOID:0000000010119912
The outside key antenna (driver side) is serviced as an assembly with the outside handle. Refer to
"OUTSIDE HANDLE : Removal and Installation"
PASSENGER SIDE
PASSENGER SIDE : Removal and Installation
INFOID:0000000010119913
The outside key antenna (passenger side) is serviced as an assembly with the outside handle. Refer to
193, "OUTSIDE HANDLE : Removal and Installation"
REAR BUMPER
REAR BUMPER : Removal and Installation
INFOID:0000000010119914
REMOVAL
1. Remove the rear bumper fascia. Refer to
EXT-17, "Removal and Installation"
2. Release the outside key antenna (rear bumper) clip (A) using a
suitable tool.
3. Disconnect the harness connector and remove the outside key
antenna (rear bumper) (1).
INSTALLATION
Installation is in the reverse order of removal.
JMKIA6343ZZ
DLK-208
< REMOVAL AND INSTALLATION >
INTELLIGENT KEY WARNING BUZZER
INTELLIGENT KEY WARNING BUZZER
Removal and Installation
INFOID:0000000010119915
REMOVAL
1. Remove the front bumper fascia. Refer to
EXT-13, "Removal and Installation"
.
2. Disconnect the harness connector from the Intelligent Key warning buzzer.
3. Remove the Intelligent Key warning buzzer bolt (A) and Intelli-
gent Key warning buzzer (1).
INSTALLATION
Installation is in the reverse order of removal.
JMKIA6339ZZ
REMOTE KEYLESS ENTRY RECEIVER
DLK-209
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REMOTE KEYLESS ENTRY RECEIVER
Removal and Installation
INFOID:0000000010119916
REMOVAL
1. Remove the glove box lid. Refer to
IP-17, "Removal and Installation"
2. Disconnect the harness connector from the remote keyless entry receiver.
3. Remove the remote keyless entry receiver bolt (A) and remote
keyless entry receiver (1).
INSTALLATION
Installation is in the reverse order of removal.
JMKIA6338ZZ
DLK-210
< REMOVAL AND INSTALLATION >
INTELLIGENT KEY BATTERY
INTELLIGENT KEY BATTERY
Removal and Installation
INFOID:0000000010119917
1. Release the lock knob at the back of the Intelligent Key and remove the mechanical key.
2. Insert a suitable tool (A) wrapped with a cloth into the slit of the
corner and twist it to separate the upper part from the lower part.
CAUTION:
• Do not touch the circuit board or battery terminal.
• The key fob is water-resistant. However, if it does get wet,
immediately wipe it dry.
3. Replace the battery with new one.
4. Align the tips of the upper and lower parts, and then push them
together until it is securely closed.
CAUTION:
• When replacing battery, keep dirt, grease, and other for-
eign materials off the electrode contact area.
• After replacing the battery, check that all Intelligent Key
functions work normally.
PIIB6221E
Battery replacement
:Coin-type lithium battery
(CR2025)
PIIB6222E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст