Nissan Leaf. Manual — part 679
REAR SPOILER
EXT-35
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
REAR SPOILER
Exploded View
INFOID:0000000010120006
REMOVAL
DISASSEMBLY
1.
Rear spoiler assembly
2.
Double-sided tape
[t: 1.5 mm (0.059 in)]
: N·m (kg-m, in-lb)
: Always replace after every disassembly.
JMKIA6466GB
E
X
T - 3 6
< REMOVAL AND INSTALLATION >
REAR SPOILER
Removal and Installation
INFOID:0000000010120007
REMOVAL
1. Remove back door upper finisher. Refer to
INT-46, "BACK DOOR UPPER FINISHER : Removal and
.
2. Remove rear spoiler mounting nuts.
3. Cut rear spoiler fixing double-sided tape with cutter knife.
4. Lift rear spoiler, and then disconnect harness connector and rear washer tube.
CAUTION:
Never lift rear spoiler with excessive force to prevent damage to the parts.
5. Remove rear spoiler.
6. Remove following parts after removing rear spoiler.
• High-mounted stop lamp. Refer to
EXL-145, "Removal and Installation"
.
• Washer nozzle
• Solar cell module (if equipped). Refer to
CHG-15, "Removal and Installation"
INSTALLATION
Note the following items, and then install in the reverse order of removal.
1.
Solar cell module (if equipped)
2.
Rear spoiler assembly
3.
High-mounted stop lamp
4.
Washer nozzle
5.
High-mounted stop lamp cover
JMKIA6467ZZ
REAR SPOILER
EXT-37
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
CAUTION:
• Be careful no to damage the back door.
• Always replace double-sided tape with a new one, if rear spoiler is reused.
• Remove double-sided tape remaining on back door panel and back of rear spoiler with a double-
sided tape remover, after removing rear spoiler.
• When installing rear spoiler, check that bolts are securely fitted in back door panel holes to prevent
damage to the parts.
• Never wash the vehicle within 24 hours after installing so as to keep adhesive.
EXT-38
< REMOVAL AND INSTALLATION >
REAR FENDER COVER
REAR FENDER COVER
Exploded View
INFOID:0000000010120008
Removal and Installation
INFOID:0000000010120009
REMOVAL
Disengage rear fender cover fixing clips using suitable tool (A), and
then remove rear fender cover.
CAUTION:
Apply protective tape (B) to the body side to protect from dam-
age.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:
When installing rear fender cover, check that clips are securely fitted in body panel holes, and then
press them in.
JMKIA6464ZZ
1.
Seal packing
2.
Clip
3.
Rear fender cover
: Always replace after every disassembly.
: Clip
JMKIA6495ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст