Nissan Leaf. Manual — part 678
DOOR SASH MOLDING
EXT-31
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
• Replace EPT sealer of front door sash cover with a new EPT sealer if front door sash cover is
reused.
• Remove double-sided tape remaining on body and back of front door sash cover using double-sided
tape remover when removing front door sash molding.
• Install after cleaning adhesive parts of door side and back of front door sash cover.
• To secure contact, never wash vehicle within 24 hours after installation.
REAR DOOR SASH COVER
Removal
1. Remove rear door sash cover mounting screw (A) and clip (B).
2. Insert a suitable tool (A) between rear door sash cover (1) and
door panel, cut double-sided tape using a cutter (B) while lifting
rear door sash cover, and remove rear door sash cover.
CAUTION:
• Never use an item as a suitable tool that could damage
door panel to prevent damage to the parts.
• Never lift rear door sash cover with excessive force to
prevent damage to the parts.
Installation
Note the following items, and install in the reverse order of removal.
CAUTION:
• When installing, slide and install rear door sash cover (2) from
door front, so that rear door outside molding (1) is not
deformed.
• Replace double-sided tape on back of rear door sash cover with a new double-sided tape if rear door
sash cover is reused.
• Replace EPT sealer of rear door sash cover with a new EPT sealer if rear door sash cover is reused.
• Remove double-sided tape remaining on body and back of rear door sash cover using double-sided
tape remover when removing rear door sash cover.
• Install after cleaning adhesive parts of door side and back of rear door sash cover.
• To secure contact, never wash vehicle within 24 hours after installation.
JMKIA5006ZZ
JMKIA2034ZZ
JMKIA5007ZZ
EXT-32
< REMOVAL AND INSTALLATION >
DOOR OUTSIDE MOLDING
DOOR OUTSIDE MOLDING
Exploded View
INFOID:0000000010120002
Removal and Installation
INFOID:0000000010120003
REMOVAL
FRONT DOOR OUTSIDE MOLDING
1. Fully open front door glass.
1.
Front door outside molding
2.
Rear door outside molding
3.
Front door panel
4.
Rear door panel
: Pawl
JMKIA6463GB
DOOR OUTSIDE MOLDING
EXT-33
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
2. Disengage fixing pawl of front door outside molding rear end,
using suitable tool (A) and (B).
CAUTION:
• Apply a protective tape (C) on the body to protect the
painted surface from damage.
• Never lift front door outside molding with excessive force
to prevent damage to the parts.
3. Twist door outside molding toward the outside of the vehicle,
and then lift up and remove it while disengaging the pawls.
REAR DOOR OUTSIDE MOLDING
1. Fully open door window.
2. Disengage fixing pawl of front door outside molding front and
rear end, using suitable tool (A) and (B).
CAUTION:
• Apply a protective tape (C) on the body to protect the
painted surface from damage.
• Never lift rear door outside molding with excessive force
to prevent damage to the parts.
INSTALLATION
Install in the reverse order of removal.
: Pawl
JMKIA6270ZZ
JMKIA3824ZZ
: Pawl
JMKIA6491ZZ
EXT-34
< REMOVAL AND INSTALLATION >
DOOR PARTING SEAL
DOOR PARTING SEAL
Exploded View
INFOID:0000000010120004
Removal and Installation
INFOID:0000000010120005
REMOVAL
FRONT DOOR PARTING SEAL
1. Fully open front door.
2. Disengage front door parting seal fixing clips, using suitable tool.
CAUTION:
• Disengage the clips slowly and carefully.
• Never pull the front door parting seal strongly to prevent damage to the parts.
3. Remove front door parting seal.
REAR DOOR PARTING SEAL
1. Fully open rear door.
2. Disengage rear door parting seal fixing clips, using suitable tool.
CAUTION:
• Disengage the clips slowly and carefully.
• Never pull the rear door parting seal strongly to prevent damage to the parts.
3. Remove rear door parting seal.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• When installing door parting seal, check that blind clips are securely fitted in door panel holes to
prevent damage to the parts.
• When installing, visually check the door parting seal and the clips, then replace them with new parts
if they are damaged.
1.
Rear door panel
2.
Rear door parting seal
3.
Front door parting seal
4.
Front door panel
AWKIA2417ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст