Nissan Leaf. Manual — part 800
DOOR MOTOR
HAC-203
< REMOVAL AND INSTALLATION >
[AUTO A/C (WITH HEAT PUMP)]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
DOOR MOTOR
Exploded View
INFOID:0000000010121909
LEFT SIDE
RIGHT SIDE
1.
Heating and cooling unit assembly
2.
Intake door lever
3.
Intake door motor
4.
Air mix door motor
5.
Upper air mix door rod
6.
Upper air mix door lever
7.
Lower air mix door lever
8.
Lower air mix door rod
JPIIA1795ZZ
HAC-204
< REMOVAL AND INSTALLATION >
[AUTO A/C (WITH HEAT PUMP)]
DOOR MOTOR
INTAKE DOOR MOTOR
INTAKE DOOR MOTOR : Removal and Installation
INFOID:0000000010121910
REMOVAL
1. Remove instrument lower panel LH. Refer to
IP-17, "Removal and Installation"
.
2. Remove knee protector.
3. Remove nuts (A), and then remove knee protector bracket (1).
4. Remove brake pedal assembly. Refer to
BR-500, "Removal and Installation"
.
5. Disconnect intake door motor connector.
1.
Heating and cooling unit assembly
2.
Main link
3.
Sub defroster door link
4.
Sub defroster door rod
5.
Mode link
6.
Plate
7.
Mode link rod
8.
Mode door motor
9.
Sub defroster door lever
10. Center ventilator and defroster door link
11. Plate
12. Center ventilator and defroster
door rod
13. Center ventilator and defroster door lever 14. Sub harness
JPIIA1796ZZ
JPIIA1891ZZ
DOOR MOTOR
HAC-205
< REMOVAL AND INSTALLATION >
[AUTO A/C (WITH HEAT PUMP)]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
6. Remove screws (A), and then remove intake door motor (1)
from heating and cooling unit assembly.
INSTALLATION
Install in the reverse order of removal.
MODE DOOR MOTOR
MODE DOOR MOTOR : Removal and Installation
INFOID:0000000010121911
REMOVAL
1. Remove glove box cover assembly. Refer to
IP-17, "Removal and Installation"
.
2. Disconnect mode door motor connector.
3. Remove screws (A), and then remove mode door motor (1) from
the heating and cooling unit assembly.
INSTALLATION
Note the following item, and then install in the order of removal.
CAUTION:
After installing door motor, perform door motor starting position. Refer to
.
AIR MIX DOOR MOTOR
AIR MIX DOOR MOTOR : Removal and Installation
INFOID:0000000010121912
REMOVAL
1. Remove instrument lower panel LH. Refer to
IP-17, "Removal and Installation"
2. Remove knee protector.
3. Remove nuts (A), and then remove knee protector bracket (1).
4. Remove brake pedal assembly. Refer to
BR-500, "Removal and Installation"
.
: Vehicle front
JPIIA1832ZZ
: Vehicle front
JPIIA1833ZZ
JPIIA1891ZZ
HAC-206
< REMOVAL AND INSTALLATION >
[AUTO A/C (WITH HEAT PUMP)]
DOOR MOTOR
5. Disconnect air mix door motor connector.
6. Remove screws (A), and then remove air mix door motor (1)
from heating and cooling unit assembly.
INSTALLATION
Note the following item, and then install in the order of removal.
CAUTION:
After installing door motor, perform door motor starting position. Refer to
.
: Vehicle front
JPIIA1834ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст