Nissan Leaf. Manual — part 418
RADIATOR CORE SUPPORT
DLK-167
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
INSTALLATION
Installation is in the reverse order of removal.
DLK-168
< REMOVAL AND INSTALLATION >
FRONT FENDER
FRONT FENDER
Exploded View
INFOID:0000000010119863
Removal and Installation
INFOID:0000000010119864
CAUTION:
Use shop cloths to protect the body from damage during removal and installation.
REMOVAL
1. Remove fender protector. Refer to
EXT-21, "FENDER PROTECTOR : Removal and Installation"
2. Remove front fender cover. Refer to
.
3. Remove front combination lamp. Refer to
EXL-130, "Removal and Installation"
.
4. Remove the front fender bolts.
5. Apply protective tape (A) on the body side outer panel to protect
the painted surface from damage.
: Front
1.
Rivet
2.
Front fender cover
3.
Front fender seal
4.
Front fender upper insulator
5.
Front fender assembly
6.
Front fender seal
7.
Front fender stiffener
Pawl
Front
AWKIA2361ZZ
JMKIA9360ZZ
FRONT FENDER
DLK-169
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
6. Using a suitable tool (A), remove front fender stiffener (2) from
the vehicle body while carefully pulling the portion of front fender
(1) toward vehicle outside.
: Front
7. Remove the front fender assembly.
CAUTION:
Use care when removing the front fender. The front fender baffle foam adheres the front fender to
the body side outer. Carefully release the baffle foam or damage to the front fender may occur.
INSTALLATION
Note the following items, and install in the reverse order of removal.
CAUTION:
• After installation, apply touch-up paint (body color) to the head of front fender bolts.
• After installation, adjust the following parts:
- Hood assembly: Refer to
DLK-155, "HOOD ASSEMBLY : Adjustment"
.
- Front door: Refer to
DLK-172, "DOOR ASSEMBLY : Adjustment"
.
JMKIA9361ZZ
DLK-170
< REMOVAL AND INSTALLATION >
FRONT DOOR
FRONT DOOR
Exploded View
INFOID:0000000010119865
DOOR ASSEMBLY
DOOR ASSEMBLY : Removal and Installation
INFOID:0000000010119866
WARNING:
Before servicing, push power switch OFF, disconnect 12V battery negative terminal and wait five min-
utes or more. Refer to
DLK-10, "Precaution for Removing 12V Battery"
CAUTION:
• Use two people when removing or installing the front door due to its heavy weight.
• When removing and installing front door assembly, support front door with a suitable tool.
REMOVAL
1. Disconnect the negative battery terminal and wait at least five minutes. Refer to
.
1.
Front door panel
2.
Grommet
3.
Bolt
4.
Door striker
5.
Bumper rubber
6.
Door check link
7.
Door hinge (lower)
8.
Door hinge (upper)
Do not reuse
Grease
AWKIA2423ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст