Nissan Leaf. Manual — part 342
BRC-158
< REMOVAL AND INSTALLATION >
[WITH VDC]
WHEEL SENSOR
REMOVAL AND INSTALLATION
WHEEL SENSOR
FRONT WHEEL SENSOR
FRONT WHEEL SENSOR : Exploded View
INFOID:0000000010120136
NOTE:
Front RH wheel sensor is symmetrically opposite of LH.
FRONT WHEEL SENSOR : Removal and Installation
INFOID:0000000010120137
REMOVAL
1. Remove front wheel and tire using power tool. Refer to
WT-45, "Removal and Installation"
2. Remove the fender protector (front). Refer to
EXT-21, "FENDER PROTECTOR : Removal and Installa-
3. Remove front wheel sensor from steering knuckle.
CAUTION:
To prevent damage to the parts, never rotate and never pull front wheel sensor as much as possi-
ble, when pulling out.
4. Remove front wheel sensor harness from the vehicle.
CAUTION:
To prevent damage to the parts, never twist or pull front wheel sensor harness, when removing.
INSTALLATION
Note the following, and install in the reverse order of the removal.
Front LH wheel sensor
Front LH wheel sensor harness con-
nector
: Vehicle front
: N·m (kg-m, in-lb)
JPFIC0191GB
WHEEL SENSOR
BRC-159
< REMOVAL AND INSTALLATION >
[WITH VDC]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
• Check that there is no foreign material like iron powder or damage on inner surface of front wheel sensor
mounting hole of steering knuckle and sensor rotor. Install after cleaning when there are foreign material like
iron powder, or replace when there is a malfunction.
• Never twist front wheel sensor harness when installing front wheel
sensor. Check that grommet is fully inserted to bracket .
Check that front wheel sensor harness is not twisted after installa-
tion.
CAUTION:
Check that the identification line of the front wheel sensor is
faced vehicle front.
REAR WHEEL SENSOR
REAR WHEEL SENSOR : Exploded View
INFOID:0000000010120138
NOTE:
Rear RH wheel sensor is symmetrically opposite of LH.
REAR WHEEL SENSOR : Removal and Installation
INFOID:0000000010120139
REMOVAL
1. Remove rear wheel sensor from wheel hub and bearing assembly.
CAUTION:
JPFIC0209ZZ
Rear LH wheel sensor
Rear LH wheel sensor harness con-
nector
: Vehicle front
: N·m (kg-m, in-lb)
JPFIC0192GB
BRC-160
< REMOVAL AND INSTALLATION >
[WITH VDC]
WHEEL SENSOR
To prevent damage to the parts, never rotate or pull rear wheel sensor as much as possible, when
pulling out.
2. Remove rear wheel sensor harness from the vehicle.
CAUTION:
To prevent damage to the parts, never twist and never pull rear wheel sensor harness, when
removing.
INSTALLATION
Note the following, and install in the reverse order of the removal.
• Check that there is no foreign material like iron powder or damage on inner surface of rear wheel sensor
mounting hole of wheel hub and bearing assembly and sensor rotor. Install after cleaning when there are for-
eign material like iron powder, or replace when there is a malfunction.
• Never twist rear wheel sensor harness when installing rear wheel
sensor. Check that grommet is fully inserted to bracket .
Check that rear wheel sensor harness is not twisted after installa-
tion.
CAUTION:
Check that the identification line of the rear wheel sensor is
faced upward.
JPFIC0209ZZ
JPFIC0198ZZ
SENSOR ROTOR
BRC-161
< REMOVAL AND INSTALLATION >
[WITH VDC]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
SENSOR ROTOR
FRONT SENSOR ROTOR
FRONT SENSOR ROTOR : Removal and Installation
INFOID:0000000010120140
REMOVAL
Replace wheel hub as an assembly when replacing because sensor rotor cannot be disassembled. Refer to
FAX-9, "Removal and Installation"
.
INSTALLATION
Replace wheel hub as an assembly when replacing because sensor rotor cannot be disassembled. Refer to
FAX-9, "Removal and Installation"
.
REAR SENSOR ROTOR
REAR SENSOR ROTOR : Removal and Installation
INFOID:0000000010120141
REMOVAL
Replace wheel hub as an assembly when replacing because sensor rotor cannot be disassembled. Refer to
RAX-7, "Removal and Installation"
INSTALLATION
Replace wheel hub as an assembly when replacing because sensor rotor cannot be disassembled. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст