Nissan Leaf. Manual — part 349
BRM-20
< PREPARATION >
BODY COMPONENT PARTS
Body Component Parts
INFOID:0000000010121689
: Both sided anti-corrosive precoated steel sections
: High strength steel (HSS) sections
: Both sided anti-corrosive steel and HSS sections
*: Aluminum portion
AWKIA2382ZZ
BODY COMPONENT PARTS
BRM-21
< PREPARATION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
No.
Parts name
Tensile strength
(MPa)
Both sided
anti-corrosive
precoated
steel sections
Aluminum
portion
1.
Hood
—
—
×
2.
Front fender (LH/RH)
Under 440
×
—
3.
Inner side roof rail (LH/RH)
780
—
—
4.
Upper inner front pillar (LH/RH)
780
—
—
5.
Inner center pillar assembly (LH/RH)
a.
T=1.6 mm
(0.063 in)
980
caution
—
—
b.
T=1.4 mm
(0.055 in)
980
caution
—
—
6.
Side body assembly (LH/RH)
Refer to No.7
−12
7.
Outer side roof rail reinforcement (LH/RH)
T=1.4 mm
(0.055 in)
980
caution
—
—
8.
Front pillar brace (LH/RH)
590
—
—
9.
Lower center pillar brace (LH/RH)
c.
T=1.2 mm
(0.047 in)
980
caution
—
—
10.
Outer front side body (LH/RH)
Under 440
×
—
11.
Front fender bracket assembly (LH/RH)
Under 440
×
—
12.
Outer sill reinforcement (LH/RH)
780
×
—
13.
Outer sill (LH/RH)
Under 440
×
—
14.
Front door (LH/RH)
—
—
×
15.
Outer front door panel (LH/RH)
—
—
×
16.
Rear door (LH/RH)
—
—
×
17.
Outer rear door panel (LH/RH)
—
—
×
18.
Inner rear pillar (LH/RH)
440
—
—
19.
Inner rear pillar reinforcement (LH/RH)
440
—
—
20.
Inner rear wheelhouse (LH/RH)
590
×
—
21.
Outer rear wheelhouse (LH/RH)
Under 440
×
—
22.
Outer rear wheelhouse extension (LH/RH)
Under 440
×
—
23.
Roof
Under 440
—
—
24.
Front roof rail
d.
T=1.0 mm
(0.039 in)
980
caution
—
—
25.
Roof bow No.1
Under 440
—
—
26.
Center roof reinforcement
590
—
—
27.
Roof bow No.3
Under 440
—
—
28.
Roof bow No.4
Under 440
—
—
29.
Rear roof rail
Under 440
—
—
30.
Rear fender (LH/RH)
Under 440
×
—
31.
Rear fender extension (LH/RH)
Under 440
—
—
32.
Rear fender corner (LH/RH)
Under 440
×
—
33.
Back door
Under 440
×
—
34.
Upper rear panel
440
×
—
35.
Upper rear bumper retainer
Under 440
×
—
36.
Rear side bumper bracket
Under 440
×
—
BRM-22
< PREPARATION >
BODY COMPONENT PARTS
NOTE:
• For the parts without a number described in the figure, it is supplied only with the assembly part that the part is included with.
• Tensile strength column shows the largest strength value of a part in the component part.
CAUTION:
If the high strength steel (ultra high strength steel) of this is broken, replace by assembly for the supply part.
37.
Rear bumper stay (LH/RH)
Under 440
×
—
38.
Inner center rear bumper reinforcement
—
—
×
No.
Parts name
Tensile strength
(MPa)
Both sided
anti-corrosive
precoated
steel sections
Aluminum
portion
REPAIR WORK FLOW
BRM-23
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
BASIC INSPECTION
REPAIR WORK FLOW
Repair Judgment Flow
INFOID:0000000010121690
WARNING:
• Because hybrid vehicles and electric vehicles contain a high voltage battery, there is the risk of elec-
tric shock, electric leakage, or similar accidents if the high voltage component and vehicle are han-
dled incorrectly. Be sure to follow the correct work procedures when performing inspection and
maintenance.
• Be sure to remove the service plug in order to disconnect the high voltage circuits before perform-
ing inspection or maintenance of high voltage system harnesses and parts.
• To prevent the removed service plug from being connected by mistake during the procedure, always
carry it in your pocket or put it in the tool box.
• Be sure to wear insulating protective equipment consisting of glove, shoes, face shield and glasses
before beginning work on the high voltage system.
• Clearly identify the persons responsible for high voltage work and ensure that other persons do not
touch the vehicle. When not working, cover high voltage parts with an insulating cover sheet or sim-
ilar item to prevent other persons from contacting them.
• Refer to
GI-34, "High Voltage Precautions"
.
CAUTION:
There is the possibility of a malfunction occurring if the vehicle is changed to READY status while the
service plug is removed. Therefore do not change the vehicle to READY status unless instructed to do
so in the Service Manual.
OVERALL SEQUENCE
DETAILED FLOW
1.
CHECK LIGHTING OF MASTER WARNING LAMP
Check that the master warning lamp is ON.
JSKIA2341GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст