Qashqai J11. Power control system — part 6
PCS
SYSTEM
PCS-81
< SYSTEM DESCRIPTION >
[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
B25A7: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (driver side)
B25A8: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (driver side)
B25A9: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified operations are performed.
• system initialization
• Replace front power window motor (driver side)
B25AA: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Harness or connectors
• Front power window motor (driver side)
B25B6: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Power window main switch
• Front power window motor (driver side)
B25B7: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Power window main switch
• Front power window motor (driver side)
B25B8: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Power window main switch
• Front power window motor (driver side)
B25B9: DR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Power window main switch
• Front power window motor (driver side)
B25BA: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (passenger side)
B25BB: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (passenger side)
B25BC: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (passenger side)
B25BD: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (passenger side)
B25BE: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace front power window motor (passenger side)
B25BF: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified operations are performed.
• system initialization
• Replace front power window motor (passenger side)
Display contents of CONSULT
Fail-safe
Cancellation
PCS-82
< SYSTEM DESCRIPTION >
[POWER DISTRIBUTION SYSTEM]
SYSTEM
B25C0: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Harness or connectors
• Front power window motor (passenger side)
B25CC: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Front power window switch (passenger side)
• Front power window motor (passenger side)
B25CD: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Front power window switch (passenger side)
• Front power window motor (passenger side)
B25CE: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Front power window switch (passenger side)
• Front power window motor (passenger side)
B25CF: PASS PWR WNDW
ACTR MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Front power window switch (passenger side)
• Front power window motor (passenger side)
B25D0: RR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace rear power window motor RH
B25D1: RR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace rear power window motor RH
B25D2: RR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace rear power window motor RH
B25D3: RR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace rear power window motor RH
B25D4: RR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
Replace rear power window motor RH
B25D5: RR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified operations are performed.
• system initialization
• Replace rear power window motor RH
B25D6: RR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Harness or connectors
• Rear power window motor RH
B25E2: RR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Rear power window switch RH
• Rear power window motor RH
B25E3: RR PWR WNDW ACTR
MALFUNC
• Auto-up operation
• Anti-pinch function
• Keyless power win-
dow up/down function
When any of the following specified malfunctioning parts is replaced.
• Rear power window switch RH
• Rear power window motor RH
Display contents of CONSULT
Fail-safe
Cancellation
PCS
SYSTEM
PCS-83
< SYSTEM DESCRIPTION >
[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
FAIL-SAFE CONTROL OF COMBINATION SWITCH READING FUNCTION CAUSED BY LOW
POWER SUPPLY VOLTAGE
If voltage of battery power supply lower, BCM maintains combination switch reading to the status when input
voltage is less than approximately 9 V.
NOTE:
When voltage of battery power supply is approximately 9 V or more, combination switch reading function
returns to normal operation.
B26E8: CLUTCH SW
Inhibit steering lock
When any of the following BCM recognition conditions are fulfilled
• Status 1
- Clutch pedal position switch signal: ON (9 – 16 V: Clutch pedal is re-
leased)
- Clutch interlock switch signal: OFF (0 – 0.5 V: Clutch pedal is re-
leased)
• Status 2
- Clutch pedal position switch signal: OFF (0 – 1.5 V: Clutch pedal is
depressed)
- Clutch interlock switch signal: ON (9 – 16 V: Clutch pedal is de-
pressed)
B261F: ASCD CNCL/CLTCH SW
Inhibit steering lock
BCM detects clutch pedal position switch signal (CAN) status [ON
(Clutch pedal is released)]
B26EF: STRG LCK RELAY OFF
Inhibit engine cranking
When the following conditions are fulfilled
• Steering lock relay signal (CAN): ON
• Steering lock unit status signal (CAN): ON
B26F0: STRG LCK RELAY ON
Inhibit engine cranking
When the following conditions are fulfilled
• Steering lock relay signal (CAN): OFF
• Steering lock unit status signal (CAN): OFF
B26F1: IGN RELAY OFF
Inhibit engine cranking
When the following conditions are fulfilled
• Ignition switch ON signal (CAN: Transmitted from BCM): ON
• Ignition switch ON signal (CAN: Transmitted from IPDM E/R): ON
B26F2: IGN RELAY ON
Inhibit engine cranking
When the following conditions are fulfilled
• Ignition switch ON signal (CAN: Transmitted from BCM): OFF
• Ignition switch ON signal (CAN: Transmitted from IPDM E/R): OFF
B26F3: START CONT RLY ON
Inhibit engine cranking
When the following conditions are fulfilled
• Starter control relay signal (CAN: Transmitted from BCM): OFF
• Starter control relay signal (CAN: Transmitted from IPDM E/R): OFF
B26F4: START CONT RLY OFF
Inhibit engine cranking
When the following conditions are fulfilled
• Starter control relay signal (CAN: Transmitted from BCM): ON
• Starter control relay signal (CAN: Transmitted from IPDM E/R): ON
B26F7: BCM
Inhibit engine cranking
by Intelligent Key sys-
tem
When room antenna and luggage room antenna functions normally
U0415: VEHICLE SPEED
Inhibit steering lock
When vehicle speed signal (Meter) (CAN) is received normally
Display contents of CONSULT
Fail-safe
Cancellation
PCS-84
< SYSTEM DESCRIPTION >
[POWER DISTRIBUTION SYSTEM]
DIAGNOSIS SYSTEM (BCM)
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
INFOID:0000000010737984
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system selection items.
×
: Applicable item
NOTE:
*: This item is displayed, but not used.
FREEZE FRAME DATA (FFD)
The BCM records the following vehicle condition at the time a particular DTC is detected, and displays on
CONSULT.
Diagnosis mode
Function Description
Work Support
Changes the setting for each system function.
Self Diagnostic Result
Displays the diagnosis results judged by BCM.
CAN Diag Support Monitor
Monitors the reception status of CAN communication viewed from BCM.
Data Monitor
The BCM input/output signals are displayed.
Active Test
The signals used to activate each device are forcibly supplied from BCM.
Ecu Identification
The BCM part number is displayed.
Configuration
• Read and save the vehicle specification.
• Write the vehicle specification when replacing BCM.
System
Sub system selection item
Diagnosis mode
Work Support
Data Monitor
Active Test
Door lock
DOOR LOCK
×
×
Rear window defogger
REAR DEFOGGER
×
×
Warning chime
BUZZER
×
×
Exterior lamp
HEAD LAMP
×
×
×
Interior room lamp control
INT LAMP
×
Wiper and washer
WIPER
×
×
×
Turn signal and hazard warning lamps
FLASHER
×
×
—
AIR CONDITONER*
×
×
Intelligent Key system
INTELLIGENT KEY
×
×
×
Combination switch
COMB SW
×
Body control system
BCM
×
NVIS - NATS
IMMU
×
Interior room lamp battery saver
BATTERY SAVER
×
Back door open
TRUNK
×
Vehicle security
THEFT ALM
×
×
RAP
RETAINED PWR
×
Remote keyless entry system
MULTI REMOTE ENT
×
×
Signal buffer system
SIGNAL BUFFER
×
×
PCS
DIAGNOSIS SYSTEM (BCM)
PCS-85
< SYSTEM DESCRIPTION >
[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
INTELLIGENT KEY
INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY) (Type 1)
INFOID:0000000010737983
WORK SUPPORT
SELF-DIAG RESULT
CONSULT screen item
Indication/Unit
Description
BATTERY VOLTAGE
V
Battery voltage of the moment a particular DTC is detected.
VEHICLE SPEED
km/h
Vehicle speed of the moment a particular DTC is detected.
EXTERNAL TEMP
°
C
External temperature of the moment a particular DTC is detected
VEHICLE COND
—
NOTE:
This item is displayed, but cannot be use this item.
DOOR LOCK STATUS
—
NOTE:
This item is displayed, but cannot be use this item.
POWER SUPPLY
COUNTER
min
Displays the cumulative time from the time that the battery terminal is connected.
Monitor item
Description
INSIDE ANT DIAGNOSIS
This function allows inside key antenna self-diagnosis
LOCK/UNLOCK BY I-KEY
Door lock/unlock function by door request switch mode can be changed to operation in this
mode
• On: Operate
• Off: Non-operation
ENGINE START BY I-KEY
Engine start function mode can be changed to operation with this mode
• On: Operate
• Off: Non-operation
TRUNK/GLASS HATCH OPEN
NOTE:
This item is displayed, but cannot be monitored
AUTO LOCK SET
Auto door lock operation time can be changed in this mode
• MODE 1: OFF
• MODE 2: 30 sec
• MODE 3: 1 minute
• MODE 4: 2 minutes
• MODE 5: 3 minutes
• MODE 6: 4 minutes
• MODE 7: 5 minutes
SHORT CRANKING OUTPUT
NOTE:
This item is displayed, but cannot be monitored
IGN/ACC BATTERY SAVER
Ignition battery saver system mode can be changed to operation with this mode
• On: Operate
• Off: Non-operation
ANSWER BACK
NOTE:
This item is displayed, but cannot be used
ANSWER BACK I-KEY LOCK UN-
LOCK
Reminder function (door request switch) mode can be selected from the following with this
mode
• On: hazard warning lamp operate
• Off: hazard warning lamp operate
ANSWER BACK KEYLESS LOCK
UNLOCK
Reminder function (Intelligent Key) mode can be selected from the following with this mode
• On: hazard warning lamp operate
• Off: hazard warning lamp operate
WELCOME LIGHT OP SET
NOTE:
This item is indicated, but not used
PCS-86
< SYSTEM DESCRIPTION >
[POWER DISTRIBUTION SYSTEM]
DIAGNOSIS SYSTEM (BCM)
DATA MONITOR
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Monitor Item
Condition
REQ SW -DR
Indicates [On/Off] condition of door request switch (driver side)
REQ SW -AS
Indicates [On/Off] condition of door request switch (passenger side)
REQ SW -BD/TR
Indicates [On/Off] condition of back door request switch
PUSH SW
Indicates [On/Off] condition of push-button ignition switch
CLUTCH SW*
1
Indicates [On/Off] condition of clutch interlock switch
BRAKE SW 1
Indicates [On/Off]*
2
condition of stop lamp switch power supply
BRAKE SW 2
Indicates [On/Off] condition of stop lamp switch
DETE/CANCL SW
Indicates [On/Off] condition of P position
START CLUTCH SW
Indicates [On/Off] condition of clutch pedal position switch
PUSH SW -IPDM
Indicates [On/Off] condition of push-button ignition switch
IGN RLY1 -F/B
Indicates [On/Off] condition of ignition relay 1
NEUTRAL SW - IPDM
Indicates [On/Off] condition of park/neutral position switch
SFT PN -IPDM
Indicates [On/Off] condition of P or N position
STARTER RELAY - IPDM
Indicates [On/Off] condition of starter relay
ENGINE STATE
Indicates [Stop/Stall/Crank/Run] condition of engine states
ST/INHIRELAY-IPDM
Display the starter relay/starter control relay status signal from IPDM E/R via CAN communica-
tion
REVERSE SIGNAL - IPDM
Indicates [On/Off] condition of R position
CRANKING PERMIT - ECM
Display the engine cranking permit signal from ECM via CAN communication
IS STATUS - ECM
Indicates [On/Off] condition of stop/start system
STARTER CUT RELAY - ECM
Indicates [On/Off] condition of starter control relay signal from ECM via CAN communication
VEH SPEED 1
Display the vehicle speed signal received from combination meter by numerical value [Km/h]
VEH SPEED 2
Display the vehicle speed signal received from ABS or VDC or TCM by numerical value [Km/h]
IGN REQ - IPDM
Display the ignition request signal from IPDM E/R via CAN communication
STARTER REQ - IPDM
Display the starter request signal from IPDM E/R via CAN communication
DOOR STAT-DR
Indicates [LOCK/READY/UNLK] condition of driver door status
DOOR STAT-AS
Indicates [LOCK/READY/UNLK] condition of passenger door status
DOOR STAT-RR
Indicates [LOCK/READY/UNLK] condition of rear door RH status
DOOR STAT-RL
Indicates [LOCK/READY/UNLK] condition of rear door LH status
BK DOOR STATE
NOTE:
This item is displayed, but cannot be monitored
ID OK FLAG
Indicates [Set/Reset] condition of Intelligent Key ID
PRMT ENG STRT
Indicates [Set/Reset] condition of engine start possible
PRMT RKE STRT
NOTE:
This item is displayed, but cannot be monitored
I-KEY OK FLAG
Indicates [KEY On/NOT On] condition of Intelligent Key ID and Intelligent Key is detected inside
vehicle
PRBT ENG STRT
Indicates whether or not the engine is in start prohibited status
ID AUTHENT CANCEL TIMER
Indicates whether or not it is in engine start possible status when Intelligent Key verification is
unnecessary
ACC BATTERY SAVER
Indicates [On/Off] whether or not ignition battery saver is in operation
PCS
DIAGNOSIS SYSTEM (BCM)
PCS-87
< SYSTEM DESCRIPTION >
[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
CRNK PRBT TMR
Indicates [On/Off] whether or not in cranking prohibited status due to starter motor protection
function operation
AUT CRANK TMR
Indicates [On/Off] whether or not in AUTO CRANKING MODE status
CRNK PRBT TME
Indicates the time for changing from cranking prohibited status to cranking possible status
AUT CRANK TMR
Indicates the time that AUTO CRANKING MODE operates
CRANKING TME
Indicates the cranking operation time
SHORT CRANK
NOTE:
This item is displayed, but not used
RKE OPE COUN1
When remote keyless entry receiver receives the signal transmitted while operating on Intelli-
gent Key, the numerical value start changing
RKE OPE COUN2
NOTE:
This item is displayed, but cannot be monitored
S/L IGN OFF POSITION
Indicates [On/Off] condition of Ignition OFF signal
S/L SENSOR CIRCUIT 1
Indicates [Gnd/Off] condition of steering lock unit sensor circuit
S/L SENSOR CIRCUIT 2
Indicates [On/Off] condition of steering lock unit sensor circuit
S/L POWER OUTPUT
Indicates [On/Off] condition of steering lock unit power supply
S/L POWER CHECK
Indicates [On/Off] condition of steering lock unit power supply
ANTICIPATED POWER
Indicates [On/Off] condition of anticipated power supply
S/L LOCK REQ
Indicates [On/Off] condition of steering lock unit lock request signal
S/L - BCM (CAN)
Indicates [On/Off] condition of CAN communication
S/L POWER ERROR
Indicates [On/Off] condition of steering lock unit power supply error
VEH SPEED ERROR (S/L)
Indicates [On/Off] condition of vehicle speed signal
VEH SPEED NORMAL (S/L)
Indicates [On/Off] condition of vehicle speed signal
ENGINE RUNNING (S/L)
Indicates [On/Off] condition of engine running
S/L ID DISCORD
Indicates [Correct/Incorrect] condition of ID verification
S/L ANTI-SCAN MODE
Indicates [On/Off] condition of antiscan mode
S/L LOCK NOT PERMIT
Indicates [Inhibition/No inhbt] condition of inhibit steering lock
S/L UNLOCK (CAN)
Indicates [Finished/Unfinished] condition of steering lock unit unlock
S/L ID STATUS (CAN)
Indicates [Coded/Blank] condition of registration ID
S/L RESET STATUS (CAN)
Indicates [Exit/No exit] condition of steering lock unit reset signal
S/L LO-LEVEL MALFUNC (CAN)
Indicates [Malf/No malf] condition of lo-level malfunction
S/L LOCK POSITION (CAN)
Indicates [Armed/Malf/Unlocked/Undefined] condition of lock/unlock position signal
S/L ACT MALFUNCTION (CAN)
Indicates [Malf/No malf] condition of steering lock unit malfunction
S/L HI-LEVEL MALFUNC (CAN)
Indicates [Malf/No malf] condition of hi-level malfunction
S/L OPERATION PRHBT (SPD)
Indicates [On/Off] condition of vehicle speed signal
S/L OPERATION PRHBT (PWR)
Indicates [Allowed/Forbid] condition of safety line inhibition
S/L SENSOR POWER (CAN)
Indicates [On/Off] condition of sensor test power supply
S/L SEN TEST PERMIT (CAN)
Indicates [Forbid/Authorize] condition of sensor test
S/L STAT NOT DETECT (CAN)
Indicates [Ok/Undefind] condition of steering lock undefined position signal
S/L LOCKING FINISHED (CAN)
Indicates [Unfinshd/Finished] condition of steering lock unit lock status signal
STOP/START SW
Indicates [On/Off] condition of stop/start off switch
RKE-LOCK
Indicates [On/Off] condition of LOCK signal from Intelligent Key
RKE-UNLOCK
Indicates [On/Off] condition of UNLOCK signal from Intelligent Key
RKE-TR/BD
NOTE:
This item is displayed, but cannot be monitored
Monitor Item
Condition
PCS-88
< SYSTEM DESCRIPTION >
[POWER DISTRIBUTION SYSTEM]
DIAGNOSIS SYSTEM (BCM)
*
1
: It is displayed but does not operate on CVT models.
*
2
: OFF is displayed when brake pedal is depressed while brake switch power supply is OFF.
ACTIVE TEST
RKE-PANIC
NOTE:
This item is displayed, but cannot be monitored
RKE-MODE CHG
Indicates [On/Off] condition of MODE CHANGE signal from Intelligent Key
RKE PBD
NOTE:
This item is displayed, but cannot be monitored
KEY SW
NOTE:
This item is displayed, but cannot be monitored
IGN SW
NOTE:
This item is displayed, but cannot be monitored
START SW
NOTE:
This item is displayed, but cannot be monitored
Monitor Item
Condition
Test item
Description
OUTSIDE BUZZER
This test is able to check Intelligent Key warning buzzer operation
• On: Operate
• Off: Non-operation
INSIDE BUZZER
This test is able to check warning chime in combination meter operation
• Buzzer 1: Combination meter buzzer sounds (pipipi...) when CONSULT screen is touched
• Buzzer 2: Combination meter buzzer sounds (pipi-pipi-...) when CONSULT screen is
touched
• Buzzer 3: Combination meter buzzer sounds (pipipipi-pipipipi-...) when CONSULT screen is
touched
• Off: Non-operation
INDICATOR
This test is able to check warning lamp operation
• KEY ON:[ Intelligent key system malfunction] displays when CONSULT screen is touched
• KEY IND: “KEY” Warning lamp blinks when CONSULT screen is touched
• Off: Non-operation
FLASHER
This test is able to check security hazard lamp operation
The hazard lamps are activated after “LH/RH/Off” on CONSULT screen is touched
HORN
NOTE:
This item is displayed, but cannot be used
IGN CONT2
This test is able to operate the blower relay in fuse block (J/B)
• On: Operates
• Off: Non-operation
MIRROR +5
NOTE:
This item is displayed, but cannot be used
ENGINE SW ILLUMI
This test is able to check push-ignition switch illumination operation
Push-ignition switch illumination illuminates when “ON” on CONSULT screen is touched
PUSH SWITCH INDICATOR
This test is able to check LOCK indicator in push-ignition switch operation
LOCK indicator in push-ignition switch illuminates when “ON” on CONSULT screen is touched
ENGINE START REQUEST
This test is able to check BCM sends starter request signal to IPDM E/R via CAN communi-
cation
• MODE 1: IGN ON, START request OFF
• MODE 2: IGN OFF, START request ON
• MODE 3: IGN ON, START request ON
• Off: Non-operation
IGNITION RELAY
NOTE:
This item is displayed, but cannot be used
STARTER CUT RELAY
This test is able to operate the starter control relay
• On: Operates
• Off: Non-operation
PCS
DIAGNOSIS SYSTEM (BCM)
PCS-89
< SYSTEM DESCRIPTION >
[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ENGINE START
NOTE:
This item is displayed, but cannot be used
TRUNK/BACK DOOR
This test is able to check back door opener actuator open operation
Back door opener actuator opens when “Open” on CONSULT screen is touched
RETRACTABLE MIRROR
NOTE:
This item is displayed, but cannot be used
REVERSE LAMP TEST
NOTE:
This item is displayed, but cannot be used
KEYFOB P/W TEST
NOTE:
This item is displayed, but cannot be used
AUTO ACC 2
This test is able to check BCM sends power supply to audio unit or NAVI control unit
• On: Operate
• Off: Non-operation
AUTOMATIC BACK DOOR
NOTE:
This item is displayed, but cannot be used
AUTO ACC 1
This test is able to check BCM sends power supply to ignition relay
• On: Operate
• Off: Non-operation
TRUNK/LUGGAGE LAMP
TEST
This test is able to check trunk room lamp operation
• On: Operates
• Off: Non-operation
Test item
Description
PCS-90
< ECU DIAGNOSIS INFORMATION >
[POWER DISTRIBUTION SYSTEM]
BCM
ECU DIAGNOSIS INFORMATION
BCM
List of ECU Reference
INFOID:0000000010434046
ECU
Reference
BCM
PCS
POWER DISTRIBUTION SYSTEM
PCS-91
< WIRING DIAGRAM >
[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
WIRING DIAGRAM
POWER DISTRIBUTION SYSTEM
Wiring Diagram
INFOID:0000000010434047
JRMWE9281GB
PCS-92
< WIRING DIAGRAM >
[POWER DISTRIBUTION SYSTEM]
POWER DISTRIBUTION SYSTEM
JRMWG7380GB
PCS
POWER DISTRIBUTION SYSTEM
PCS-93
< WIRING DIAGRAM >
[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
JRMWG7381GB
PCS-94
< WIRING DIAGRAM >
[POWER DISTRIBUTION SYSTEM]
POWER DISTRIBUTION SYSTEM
JRMWG7382GB
PCS
POWER DISTRIBUTION SYSTEM
PCS-95
< WIRING DIAGRAM >
[POWER DISTRIBUTION SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
JRMWG7383GB
PCS-96
< WIRING DIAGRAM >
[POWER DISTRIBUTION SYSTEM]
POWER DISTRIBUTION SYSTEM
JRMWG7384GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст