Nissan Murano. Manual — part 1224
SEATBACK CONTROL CABLE
SE-119
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
Removal and Installation
INFOID:0000000009718776
REMOVAL
1.
Remove the seatback control lever escutcheon.
2.
Remove the luggage side lower finisher. Refer to
INT-35, "Removal and Installation"
3.
Remove the rear seat assembly. Refer to
SE-109, "Removal and Installation"
4.
Remove the mounting nuts (A), and then remove the seatback
control lever.
5.
Remove the rear seat mount bracket.
a.
Remove the seat mount bracket mounting bolts (A) and nuts (B).
b.
Remove the seatback control cable bush (1).
c.
Remove the seatback control cable from the vehicle.
INSTALLATION
Install in the reverse order of removal.
16. Seat cushion link bush
17. Reclining device inner cover (out-
side)
18. Reclining device inner cover (inside)
19. Reclining device assembly
20. Reclining device outer cover
21. Reclining cover
22. Rear seat harness (RH)
23. Seatback board
24. Seatback board clip
25. Seatback frame
26. Dynamic dumper
27. Seatback control lever escutcheon
28. Seatback control cable
29. Seatback silencer
Refer to
for symbols in the figure.
JMJIA1448ZZ
JMJIA1464ZZ
SE-120
< REMOVAL AND INSTALLATION >
REAR SEAT BACK POWER RETURN CONTROL UNIT
REAR SEAT BACK POWER RETURN CONTROL UNIT
Exploded View
INFOID:0000000009718777
Removal and Installation
INFOID:0000000009718778
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove mounting nuts (A).
2.
Remove rear seatback power return control unit (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
1.
Rear seatback power return control unit
JMJIA1413ZZ
JMJIA1414ZZ
POWER SEAT SWITCH
SE-121
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
POWER SEAT SWITCH
Exploded View
INFOID:0000000009718779
.
Removal and Installation
INFOID:0000000009718780
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the seat cushion outer finisher (1). Refer to
2.
Remove screws (A).
3.
Remove the power seat switch (2) from the seat cushion outer
finisher.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
JMJIA1451ZZ
SE-122
< REMOVAL AND INSTALLATION >
LUMBAR SUPPORT SWITCH
LUMBAR SUPPORT SWITCH
Exploded View
INFOID:0000000009718781
Removal and Installation
INFOID:0000000009718782
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the seat cushion outer finisher (1). Refer to
SE-98, "Removal and Installation"
.
2.
Remove the lumbar support switch (2) from the seat cushion
outer finisher using remover tool (A).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
: Pawl
JMJIA1468ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст