Nissan Murano. Manual — part 1223
REAR SEAT
SE-115
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
9.
Remove the mounting bolts (A), and then remove the seatback
frame from reclining device assembly.
10. Remove the mounting nuts (A), and then remove the dynamic
dumper. (With top road sunroof model only)
Assembly
Note the following item, and assemble in the reverse order of disassembly.
CAUTION:
Install the hog rings of seatback trim in position, and then securely connect the trim or trim cord with
the seatback frame.
SEAT CUSHION
Disassembly
1.
Remove the armrest. (RH seat only)
a.
Remove the pawl, and then pull out armrest outer cover.
b.
Remove the mounting bolts (A), and then slide the armrest to
outside.
2.
Separate the seatback assembly and seat cushion assembly.
JMJIA1446ZZ
JMJIA1447ZZ
: Pawl
JMJIA1470ZZ
JMJIA1471ZZ
SE-116
< REMOVAL AND INSTALLATION >
REAR SEAT
a.
Disconnect the seat cushion heater unit harness connectors (A)
and remove the harness clamps. (with heater seat model only)
b.
Remove the seat cushion link cover.
c.
Remove the mounting bolt (A), and then separate the seatback
assembly and seat cushion assembly.
3.
Remove the seat cushion trim.
Remove the seat cushion trim fixing retainers and hog rings, and then remove the seat cushion trim from
seat cushion pad and frame.
Assembly
Note the following, and assemble in the reverse order of disassembly.
CAUTION:
Install the hog rings of seat cushion trim in position, and then securely connect the trim or trim cord
with the seat cushion pad wire.
JMJIA1438ZZ
JMJIA1439ZZ
JMJIA1440ZZ
SEATBACK CONTROL CABLE
SE-117
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
SEATBACK CONTROL CABLE
Exploded View
INFOID:0000000009718775
REAR SEAT (LH SIDE)
1.
Headrest (LH)
2.
Headrest holder (locked)
3.
Headrest holder (free)
4.
Seatback trim
5.
Seatback pad
6.
Reclining device inner cover (out-
side)
7.
Reclining device inner cover (inside) 8.
Seat cushion trim
9.
Seat cushion hinge cover
10. Seat cushion link cover
11.
Seat cushion pad and frame
12. Seat cushion link bush
13. Reclining device outer cover
14. Reclining cover
15. Rear seat harness (LH)
JMJIA1466GB
SE-118
< REMOVAL AND INSTALLATION >
SEATBACK CONTROL CABLE
REAR SEAT (RH SIDE)
16. Reclining device assembly
17. Seatback control cable
18. Seatback control lever escutcheon
19. Seatback frame
20. Seatback board
21. Seatback board clip
22. Seatback silencer
Refer to
for symbols in the figure.
1.
Headrest (RH)
2.
Headrest (center)
3.
Headrest holder (locked)
4.
Headrest holder (free)
5.
Seatback trim
6.
Seatback pad
7.
Armrest inner cover
8.
Cup holder
9.
Armrest
10. Armrest bush
11.
Armrest outer cover
12. Seat cushion trim
13. Seat cushion hinge cover
14. Seat cushion link cover
15. Seat cushion pad and frame
JMJIA1465GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст