Nissan Terrano model r20 series 2004. Manual — part 193
Bleeding Procedure
1. Bleed air from clutch operating cylinder according to the follow-
ing procedure.
Carefully monitor fluid level at master cylinder during bleeding
operation.
a. Top up reservoir with recommended brake fluid.
b. Connect a transparent vinyl tube to air bleeder valve of clutch
damper.
c. Fully depress clutch pedal several times.
d. With clutch pedal depressed, open bleeder valve to release air.
e. Close bleeder valve.
f.
Repeat steps (c) through (e) above until brake fluid flows from
air bleeder valve without air bubbles.
2. Bleed air from clutch operating cylinder according to the above
procedure.
3. Repeat the above bleeding procedures 1 and 2 several times.
NCL025
INSPECTION AND ADJUSTMENT
CL-6
NCL028
CLUTCH MASTER CYLINDER
CL-7
Clutch Master Cylinder
INSPECTION
I
Check cylinder and piston rubbing surface for uneven wear,
rust or damage. Replace if necessary.
I
Check piston and piston cup for wear or damage. Replace if
necessary.
I
Check return spring for wear or damage. Replace if necessary.
I
Check reservoir for deformation or damage. Replace if neces-
sary.
I
Check dust cover for cracks, deformation or damage. Replace
if necessary.
Clutch Operating Cylinder
INSPECTION
I
Check rubbing surface of cylinder for wear, rust or damage.
Replace if necessary.
I
Check piston and piston cup for wear or damage. Replace if
necessary.
I
Check piston spring for wear or damage. Replace if necessary.
I
Check dust cover for cracks, deformation or damage. Replace
if necessary.
SCL420-A
HYDRAULIC CLUTCH CONTROL
CL-8
REMOVAL AND INSTALLATION
I
Install retainer spring and holder spring.
I
Remove release bearing.
I
Install release bearing with suitable drift.
NCL017
SCL217
CL145
SCL222
CLUTCH RELEASE MECHANISM
CL-9
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст