Nissan Terrano model r20 series 2004. Manual — part 192
Precautions
I
Recommended fluid is brake fluid “DOT 4”.
I
Do not reuse drained brake fluid.
I
Be careful not to splash brake fluid on painted areas.
I
When removing and installing clutch piping, use Tool.
I
To clean or wash all parts of master cylinder, operating
cylinder and clutch damper, use clean brake fluid.
I
Never use mineral oils such as gasoline or kerosene. It will
ruin the rubber parts of the hydraulic system.
WARNING:
Remove all dust from clutch disc with a dust collector after
cleaning with waste cloth.
Preparation
SPECIAL SERVICE TOOLS
*: Special tool or commercial equivalent
Tool number
Tool name
Description
ST20050010
Base plate
Inspecting diaphragm spring of clutch cover
ST20050100
Distance piece
Inspecting diaphragm spring of clutch cover
GG94310000
Flare nut torque
wrench
Removing and installing each clutch piping
KV30100100*
Clutch aligning bar
Installing clutch cover and clutch disc
ST20050240*
Diaphragm spring
adjusting wrench
Adjusting unevenness of diaphragm spring of clutch
cover
SBR820B
PRECAUTIONS AND PREPARATION
CL-2
YCL022
CLUTCH SYSTEM
CL-3
Clutch Pedal
YCL094
CLUTCH SYSTEM
CL-4
Adjusting Clutch Pedal
1. Adjust pedal height with pedal stopper.
Pedal height “H”:
LHD: 227 - 237 mm (8.94 - 9.33 in)
RHD: 210 - 220 mm (8.27 - 8.66 in)
2. Adjust pedal free play with master cylinder push rod. Then
tighten lock nut.
Pedal free play “A”:
1.0 - 3.0 mm (0.039 - 0.118 in)
YCL009
INSPECTION AND ADJUSTMENT
CL-5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст