Juke F15 (2012 year). Service Repair Manual — part 64
DLK-16
OUTSIDE HANDLE : Removal and Installation . .
BACK DOOR LOCK . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ...
DOOR LOCK . . . . . . . . . . . . . . .
DOOR LOCK : Removal and Installation . . . ...
EMERGENCY LEVER . . . . . . . . . . . ..
EMERGENCY LEVER : Unlock procedures . . ..
FUEL FILLER LID OPENER . . . . . . ...
Exploded View . . . . . . . . . . . . . ...
FUEL FILLER LID . . . . . . . . . . . . .
FUEL FILLER LID : Removal and Installation . ...
FUEL FILLER OPENER CABLE . . . . . . . .
FUEL FILLER OPENER CABLE : Removal and
Installation . . . . . . . . . . . . . . . .
FUEL FILLER LID LOCK . . . . . . . . . .
FUEL FILLER LID LOCK : Removal and Installa-
tion . . . . . . . . . . . . . . . . . .
DOOR SWITCH . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . ...
REMOTE KEYLESS ENTRY RECEIVER . .
Removal and Installation . . . . . . . . . ...
KEYFOB BATTERY . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ..
APPLICATION NOTICE
DLK-17
< HOW TO USE THIS MANUAL >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
HOW TO USE THIS MANUAL
APPLICATION NOTICE
Information
INFOID:0000000006445314
Check the vehicle type to use the service information in this section.
Service information
Destination
Type 1
With Intelligent Key and super lock
Type 2
With Intelligent Key, without super lock
Type 3
Without Intelligent Key, with super lock
Type 4
Without Intelligent Key and super lock
DLK-18
< PRECAUTION >
[TYPE 1]
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000006635610
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the “SRS AIR BAG” and
“SEAT BELT” of this Service Manual.
The vehicle may be equipped with a passenger air bag deactivation switch. Because no rear seat exists where
a rear-facing child restraint can be placed, the switch is designed to turn off the passenger air bag so that a
rear-facing child restraint can be used in the front passenger seat. The switch is located in the center of the
instrument panel, near the ashtray. When the switch is turned to the ON position, the passenger air bag is
enabled and could inflate for certain types of collision. When the switch is turned to the OFF position, the pas-
senger air bag is disabled and will not inflate. A passenger air bag OFF indicator on the instrument panel lights
up when the passenger air bag is switched OFF. The driver air bag always remains enabled and is not affected
by the passenger air bag deactivation switch.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the “SRS AIR BAG”.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
• The vehicle may be equipped with a passenger air bag deactivation switch which can be operated by
the customer. When the passenger air bag is switched OFF, the passenger air bag is disabled and
will not inflate. When the passenger air bag is switched ON, the passenger air bag is enabled and
could inflate for certain types of collision. After SRS maintenance or repair, make sure the passenger
air bag deactivation switch is in the same position (ON or OFF) as when the vehicle arrived for ser-
vice.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s)
with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly
causing serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
INFOID:0000000006635616
NOTE:
• Before removing and installing any control units, first turn the ignition switch to the LOCK position, then dis-
connect both battery cables.
• After finishing work, confirm that all control unit connectors are connected properly, then re-connect both
battery cables.
• Always use CONSULT-III to perform self-diagnosis as a part of each function inspection after finishing work.
If a DTC is detected, perform trouble diagnosis according to self-diagnosis results.
For vehicle with steering lock unit, if the battery is disconnected or discharged, the steering wheel will lock and
cannot be turned.
If turning the steering wheel is required with the battery disconnected or discharged, follow the operation pro-
cedure below before starting the repair operation.
PRECAUTIONS
DLK-19
< PRECAUTION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
OPERATION PROCEDURE
1.
Connect both battery cables.
NOTE:
Supply power using jumper cables if battery is discharged.
2.
Turn the ignition switch to ACC position.
(At this time, the steering lock will be released.)
3.
Disconnect both battery cables. The steering lock will remain released with both battery cables discon-
nected and the steering wheel can be turned.
4.
Perform the necessary repair operation.
5.
When the repair work is completed, re-connect both battery cables. With the brake pedal released, turn
the ignition switch from ACC position to ON position, then to LOCK position. (The steering wheel will lock
when the ignition switch is turned to LOCK position.)
6.
Perform self-diagnosis check of all control units using CONSULT-III.
Precaution for Procedure without Cowl Top Cover
INFOID:0000000006635617
When performing the procedure after removing cowl top cover, cover
the lower end of windshield with urethane, etc.
Work
INFOID:0000000006302703
• After removing and installing the opening/closing parts, be sure to carry out fitting adjustments to check their
operational.
• Check the lubrication level, damage, and wear of each part. If necessary, grease or replace it.
PIIB3706J
DLK-20
< PREPARATION >
[TYPE 1]
PREPARATION
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000006302705
Tool name
Description
Engine ear
Locates the noise
Remover tool
Removes the clips, pawls, and metal clips
Power tool
SIIA0995E
JMKIA3050ZZ
PIIB1407E
COMPONENT PARTS
DLK-21
< SYSTEM DESCRIPTION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000006302706
JMKIA5926ZZ
DLK-22
< SYSTEM DESCRIPTION >
[TYPE 1]
COMPONENT PARTS
Component Description
INFOID:0000000006302707
1.
Combination meter
2.
Intelligent Key warning buzzer
3.
Push-button ignition switch
4.
Inside key antenna (instrument center) 5.
TCM
Refer to
(RE0F10B models)
(RE0F11A models)
6.
Remote keyless entry receiver
7.
BCM
Refer to
SYSTEM : Component Parts Location"
8.
Power window switch (passenger
side) (door lock and unlock switch)
9.
Outside key antenna (passenger side)
10. Front door request switch (passenger
side)
11.
Inside key antenna (console)
12. Inside key antenna (luggage room)
13. Back door request switch
14. Back door lock assembly
15. Outside antenna (rear bumper)
16. Front door lock assembly (driver side) 17. Front door switch (driver side)
18. Front door request switch (driver side)
19. Outside key antenna (driver side)
20. Power window main switch (door lock
and unlock switch)
21. Door lock status indicator
22. Air bag diagnosis sensor unit
Refer to
A.
View with front bumper removed
B.
View with multi display unit removed
C.
View with instrument panel assembly
removed
D.
View with center console assembly re-
moved
E.
View with luggage room finisher re-
moved
F.
View with rear bumper removed
Item
Function
Air bag diagnosis sensor unit
Transmits air bag signal to BCM.
BCM
Controls the door lock system.
Back door opener actuator
Opens the back door with the back door open signal from BCM.
Back door opener switch
Inputs back door opener switch operation signal to BCM.
Combination meter
• Displays each operation method guide and warning for system malfunction.
• Performs operation method guide and warning with buzzer.
• Transmits vehicle seep signal to CAN communication line.
Door lock actuator
• Inputs locks/unlocks signal from BCM and locks/unlocks each door.
• Integrated in each door lock assembly.
Door lock and unlock switch
• Transmits door lock/unlock operation to BCM.
• Integrated in the power window main switch and front power window switch (passenger side).
Door lock status indicator
• The door lock status indicates door lock status.
• The indicator illuminates when a lock operation is successful.
Door request switch
• Transmits door lock/unlock operation to BCM.
• Integrated in the outside handle (driver side, passenger side and back door).
Door switch
Detects door open/close condition.
Inside key antenna
• Detects whether Intelligent Key is inside the vehicle.
• Installed in the instrument center, consol and luggage room.
Intelligent Key
The following functions are available when having and carrying electronic ID.
• Door lock/unlock
• Engine start
• Remote control entry function is available when operating on button.
Intelligent Key warning buzzer
Warns for an inappropriate operation.
Outside key antenna
• Detects whether Intelligent Key is outside the vehicle.
• Integrated in the outside handle (driver side, passenger side and back door).
Push-button ignition switch
• BCM transmits the change in the power supply position with the push-button ignition switch to
IPDM E/R via CAN communication line. IPDM E/R transmits the power supply position status
via CAN communication line to BCM.
• Immobilizer antenna amp checks Intelligent Key transponder.
COMPONENT PARTS
DLK-23
< SYSTEM DESCRIPTION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Remote keyless entry receiver
Receives Intelligent Key operation and transmits to BCM.
Super lock actuator
• Inputs super lock set/release signal from BCM and set/release super lock function.
• Integrated in each door lock assembly.
TCM
Transmits shift position signal to BCM via CAN communication line.
Unlock sensor
Built-in in driver side door lock assembly
• Detects door lock condition of driver door
Item
Function
DLK-24
< SYSTEM DESCRIPTION >
[TYPE 1]
SYSTEM (POWER DOOR LOCK SYSTEM)
SYSTEM (POWER DOOR LOCK SYSTEM)
System Diagram
INFOID:0000000006302723
System Description
INFOID:0000000006302724
DOOR LOCK FUNCTION
Door Lock and Unlock Switch
• The door lock and unlock switch (driver side) is build into power window main switch.
• The door lock and unlock switch (passenger side) is build into front power window switch (passenger side).
• Interlocked with the locking operation of door lock and unlock switch, door lock actuators of all doors are
locked.
• Interlocked with the unlocking operation of door lock and unlock switch, door lock actuators of all doors actu-
ator are unlocked.
Unlock Sensor
• With the mechanical key inserted in the door key cylinder on driver side, turning it to lock position, locks door
lock actuator of all doors.
• With the mechanical key inserted in the door key cylinder on driver side, turning it to unlock position, unlocks
door lock actuator of all doors.
AIR BAG INTERLOCK UNLOCK FUNCTION
When ignition switch is ON and BCM receives air bag signal, it operates automatically to unlock all doors. Air
bag diagnosis sensor unit sends the air bag signal to BCM.
INTERIOR ROOM LAMP CONTROL FUNCTION
Interior room lamp is controlled according to door lock /unlock state, refer to
CONTROL SYSTEM : System Description"
OPERATION CONDITION
If all of the following conditions are satisfied, door lock and unlock operation is performed using the door lock/
unlock switch.
*
1
: While door lock and unlock switch is pressed in the lock direction during this state, combination meter buzzer sounds and warns.
*
2
: When this item becomes OK according to Intelligent Key ID verification, door lock/unlock operation is allowed.
JMKIA5999GB
Door lock and unlock switch operation
Operation condition
LOCK
• Closed driver side door
• Doors other than drivers door are closed*
1
• Super lock is releases*
2
• Doors are not locked by Intelligent Key or door request switch*
2
• Door lock that is requested is not auto door lock*
2
UNLOCK
Doors are not locked by Intelligent Key or door request switch*
2
SYSTEM (POWER DOOR LOCK SYSTEM)
DLK-25
< SYSTEM DESCRIPTION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
NOTE:
Information of super lock function. Refer to
DLK-30, "SUPER LOCK FUNCTION : System Description"
.
DOOR LOCK STATUS INDICATOR OPERATION
The door lock status indicator indicates door lock status under the following condition. And the timer is running
to turn OFF the indicator.
*
1
: Steering lock is locked.
1 Minute Timer
A timer must be running to turn OFF the indicator. The timer runs for 1 minute after doors are locked by Intelli-
gent Key, door request switch or auto door lock.
30 Minute Timer
A timer must be running to turn OFF the indicator. The timer runs for 30 minutes after doors are locked by door
lock and unlock switch.
OVERRIDE FUNCTION
When inside handle of front door is operated while doors are in lock states, lock state of the applicable door
lock becomes invalid and the door is open.
UNLOCK LINK FUNCTION
When driver door or passenger door is opened using the override function, all doors are unlocked.
Unlock function operates when driver door or passenger door is open while all of the following conditions are
satisfied.
NOTE:
When anti-hijack function is activated, only the applicable door is unlocked.
AUTOMATIC DOOR LOCK/UNLOCK FUNCTION (LOCK OPERATION)
The interlock door lock function is the function that locks all doors linked with the vehicle speed or shift posi-
tion. It has 2 types as per the following items.
Vehicle Speed Sensing Auto Door Lock
All doors are locked when the vehicle speed reaches 10 km/h (6 MPH) or more.
BCM outputs the lock signal to all door lock actuators when it detects that the ignition switch is turned ON, all
doors are closed and the vehicle speed received from the combination meter via CAN communication
becomes 10 km/h (6 MPH) or more.
P Range Interlock Door Lock*
1
All doors are locked when shifting the selector lever from the P position to any position other than P.
BCM outputs the lock signal to all door lock actuators when it detects that the ignition switch is in the ON posi-
tion and the shift signal received from the TCM via CAN communication is shifted from the P position to any
position other than P.
Setting change of Automatic Door Lock/Unlock Function
Lock operation
Ignition position
Door state
Indicator operation
Door lock and unlock switch
ON
All doors closed
ON
Door lock and unlock switch
ON
Any doors open
OFF
Door lock and unlock switch
ACC, OFF or LOCK*
1
All doors closed
ON (30 minute timer)
Intelligent Key/
Door request switch/
Auto door lock function
ACC, OFF or LOCK*
1
All doors closed
ON (1 minute timer)
Door lock and unlock switch
ACC, OFF or LOCK*
1
Driver doors open
→
All doors closed
OFF
→
ON (30 minute timer)
Intelligent Key/
Door request switch
ACC, OFF or LOCK*
1
Any doors open
→
All doors closed
OFF
→
ON (1 minute timer)
Operation condition
• Doors are locked by door lock/unlock switch or by automatic lock/unlock function
• Driver or passenger door switch is switched from OFF to ON
• Anti-hijack function is not activated
• Vehicle speed is 5 km/h (3 MPH) or less
DLK-26
< SYSTEM DESCRIPTION >
[TYPE 1]
SYSTEM (POWER DOOR LOCK SYSTEM)
The lock operation setting of the automatic door lock/unlock function can be changed.
NOTE:
P range interlock door lock can be selected for M/T models, but automatic door lock/unlock function does not
operate.
With CONSULT-III
The ON/OFF switching of the automatic door lock function and the type selection of the automatic door lock/
unlock function can be performed at the WORK SUPPORT setting of CONSULT-III.
Without CONSULT- III
The automatic door lock function ON/OFF can be switched by performing the following operation.
1.
Close all doors (door switch OFF)
2.
Ignition switch: OFF
→
ON
3.
Press and hold the door lock and unlock switch for 5 seconds or more in the lock direction within 20 sec-
onds after turning the ignition switch ON.
4.
The switching complete when the hazard lamp blinks.
*
1
: This function does not operate on M/T models.
AUTOMATIC DOOR LOCK/UNLOCK FUNCTION (UNLOCK OPERATION)
The automatic door lock/unlock function is the function that unlocks all doors linked with the key position or
shift position. It has 2 types as per the following items.
IGN OFF Interlock Door Unlock
All doors are unlocked when the power supply position is changed from ON to OFF.
BCM outputs the unlock signal to all door lock actuators when it detects that the power supply position is
changed from ignition switch ON to OFF.
P Range Interlock Door Unlock*
1
All doors are unlocked when shifting the selector lever from any position other than the P to P position.
BCM outputs the unlock signal to all door lock actuators when it detects that the ignition switch is in the ON
position and the shift signal received from TCM via CAN communication is shifted from any position other than
the P to P position.
Setting change of Automatic Door Lock/Unlock Function
The unlock operation setting of the automatic door lock/unlock function can be changed.
NOTE:
P range interlock door lock can be selected for M/T models, but automatic door lock/unlock function does not
operate.
With CONSULT- III
The ON/OFF switching of the automatic door lock/unlock function and the type selection of the automatic door
lock/unlock function can be performed at the WORK SUPPORT setting of CONSULT-III. Refer to
"DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock)"
Without CONSULT- III
The automatic door lock/unlock function ON/OFF can be switched by performing the following operation.
1.
Close all doors below (door switch OFF)
2.
Ignition switch: OFF
→
ON
3.
Press and hold the door lock and unlock switch for 5 seconds or more in the unlock direction within 20
seconds after turning the power supply position ON.
4.
The switching is complete when the hazard lamp blinks.
*
1
: This function does not operate on M/T models.
OFF
→
ON
: 2 blinks
ON
→
OFF
: 1 blink
OFF
→
ON
: 2 blinks
ON
→
OFF
: 1 blink
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-27
< SYSTEM DESCRIPTION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
SYSTEM (INTELLIGENT KEY SYSTEM)
INTELLIGENT KEY SYSTEM
INTELLIGENT KEY SYSTEM : System Diagram
INFOID:0000000006302725
INTELLIGENT KEY SYSTEM : System Description
INFOID:0000000006302726
• The Intelligent Key system is a system that makes it possible to lock and unlock the door locks (door lock/
unlock function) by carrying the Intelligent Key, which operates based on the results of electronic ID verifica-
tion using two-way communication between the Intelligent Key and the vehicle (BCM).
CAUTION:
The driver should always carry the Intelligent Key
• The settings for each function can be changed with CONSULT-III.
• If an Intelligent Key is lost, a new Intelligent Key can be registered. A maximum of 4 Intelligent Keys can be
registered.
• It is possible to perform a diagnosis on the system and register an Intelligent Key with CONSULT-III.
JMKIA6003GB
Function
Description
Refer
Door lock
Lock/unlock can be performed by pressing the request switch
Super lock
When all doors are closed super lock system can be set/release by Intelligent
Key or door request switch
Remote keyless entry
Lock/unlock can be performed by pressing the remote controller button of the In-
telligent Key
DLK-28
< SYSTEM DESCRIPTION >
[TYPE 1]
SYSTEM (INTELLIGENT KEY SYSTEM)
DOOR LOCK FUNCTION
DOOR LOCK FUNCTION : System Diagram
INFOID:0000000006302727
DOOR LOCK FUNCTION : System Description
INFOID:0000000006302728
When pressing the door request switch, it is possible to lock and unlock the door by carrying the Intelligent
Key.
OPERATION DESCRIPTION
• When the BCM detects that each door request switch is pressed, it activates the outside key antenna and
inside key antenna corresponding to the pressed door request switch and transmits the request signal to the
Intelligent Key. And then, check that the Intelligent Key is near the door.
• If the Intelligent Key is within the outside key antenna detection area, it receives the request signal and
transmits the key ID signal to the BCM via remote keyless entry receiver.
• BCM receives the key ID signal and compares it with the registered key ID.
• BCM lock/unlock each door, sets/releases super lock, and blinks hazard warning lamps (lock: 1 time, unlock:
2 times) at the same time as a reminder.
NOTE:
Information of super lock function.
Refer to
DLK-30, "SUPER LOCK FUNCTION : System Description"
OPERATION CONDITION
If the following conditions are satisfied, door lock/unlock operation is performed if the door request switch is
operated.
Key reminder
The key reminder buzzer sounds a warning if the door is locked with the key left
inside the vehicle
Warning
If an action that does not meet the operating condition of the Intelligent Key sys-
tem is taken, the buzzer sounds to inform the driver
Auto retractable door mirror
Door mirror operates by operation of Intelligent Key
Engine start
The engine can be turned on while carrying the Intelligent Key
Interior room lamp control
Interior room lamp is controlled according to door lock/unlock state
Function
Description
Refer
JMKIA6007GB
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-29
< SYSTEM DESCRIPTION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
*: Even with a registered Intelligent Key remaining inside the vehicle, door locks can be unlocked from outside of the vehicle with a spare
Intelligent Key as long as key IDs are different.
OUTSIDE KEY ANTENNA DETECTION AREA
The outside key antenna detection area of door lock/unlock function
is in the range of approximately 80 cm (31.50 in) surrounding the
driver, passenger door handles (1) and back door handle (2). How-
ever, this operating range depends on the ambient conditions.
ANTI-HIJACK FUNCTION
Information of super lock system with anti-hijack function.
Refer to
DLK-30, "SUPER LOCK FUNCTION : System Description"
.
HAZARD REMINDER FUNCTION
Blinks hazard warning lamps as a reminder, during lock/unlock operation using door request switch.
Setting of Hazard Reminder Mode
AUTO DOOR LOCK FUNCTION
After door is unlocked by door request switch operation and if 30 seconds or more passes without performing
the following operation, all doors are automatically locked. However, operation check function does not acti-
vate.
Each door request switch operation
Operation condition
Lock
• All doors are closed
• Ignition switch is in the OFF position
• P position warning is not activated
• Intelligent Key is outside the vehicle
• Intelligent Key is within outside key antenna detection area
Unlock
• All doors are closed
• Ignition switch is in the OFF position
• Intelligent Key is outside the vehicle
• Intelligent Key is within outside key antenna detection area *
JMKIA5569ZZ
Hazard reminder setting
(With CONSULT-III)
Door lock operation
(with door request switch)
Hazard warning lamp blink
HAZARD ANSWER BACK
OFF
Any
—
LOCK ONLY
Lock
Once
Unlock
—
Unlock (Anti-hijack)
—
UNLK ONLY
Lock
—
Unlock
Twice
Unlock (Anti-hijack)
Twice (quick)
LOCK/UNLK
Lock
Once
Unlock
Twice
Unlock (Anti-hijack)
Twice (quick)
Operating condition
• Door switch is ON (door is open)
• Door is locked
• Push switch is pressed
DLK-30
< SYSTEM DESCRIPTION >
[TYPE 1]
SYSTEM (INTELLIGENT KEY SYSTEM)
Auto door lock mode can be changed by the “AUTO LOCK SET” mode in “WORK SUPPORT”. Refer to
43, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (With Super Lock)"
.
DOOR LOCK STATUS INDICATOR OPERATION
• Door lock status indicator turns indicator lamp ON or OFF and indicates door lock or unlock state.
• For door lock status indicator operation, refer to
.
LIST OF OPERATION RELATED PARTS
Parts marked with
×
are the parts related to operation.
SUPER LOCK FUNCTION
SUPER LOCK FUNCTION : System Diagram
INFOID:0000000006532134
SUPER LOCK FUNCTION : System Description
INFOID:0000000006302729
• Super lock provides a higher anti-theft performance than a conventional door lock function.
• BCM controls the super lock function.
Door lock function
In
te
lli
ge
nt Key
Re
mo
te
ke
yl
es
s en
try rec
e
iv
e
r
Door switch
Do
or re
qu
es
t s
w
itc
h
Do
or l
o
c
k
ac
tua
to
r
In
si
d
e
ke
y an
ten
n
a
Out
s
id
e ke
y a
n
ten
n
a
CAN co
mm
un
ic
ati
o
n
sy
s
tem
BC
M
Do
or
lo
c
k
st
atu
s
ind
ic
a
to
r
Hazard w
a
rning
lamp
Pu
sh
-bu
tton
i
g
ni
ti
o
n
swi
tch
Co
mb
in
ati
o
n
me
te
r
Door lock/unlock function
×
×
×
×
×
×
×
×
Hazard reminder function
×
×
×
×
Door lock status indicator operation
×
×
Anti-hijack function
×
×
×
×
×
×
Auto door lock function
×
×
×
×
JMKIA6012GB
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-31
< SYSTEM DESCRIPTION >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
• When all doors are closed super lock system can be set/release by Intelligent Key or door request switch.
• When super lock is set, inside handle of doors do not work.
SUPER LOCK SET OPERATION (LOCK OPERATION)
Super Lock Set by Intelligent Key
When Intelligent Key lock button is operated while all doors are in unlock state, super lock of all doors is set,
and simultaneously, all doors are locked.
Super Lock Set by Door Request Switch
When door request switch (driver side, passenger side, or back door) is operated while all doors are in unlock
state, super lock of all doors is set, and simultaneously, all doors are locked.
SUPER LOCK RELEASE OPERATION (UNLOCK OERATION) WITH ANTI-HIJACK MODE
Super Lock Release by Intelligent Key
When Intelligent Key unlock button is operated while super lock of all doors is set, super lock of all doors is
released, and simultaneously, driver door are unlocked. When Intelligent Key unlock button is operated again
within 5 seconds of the 1st unlock button operation, all doors are unlocked.
Super Lock Release by Door Request Switch (Driver Side)
When driver side door request switch is operated while super lock of all doors is set, super lock of all doors is
released, and simultaneously, driver door are unlocked. When driver side door request switch is operated
again within 5 seconds of the 1st driver side door request switch operation, all doors are unlocked.
Super Lock Release by Door Request Switch (Passenger Side)
When passenger side door request switch is operated while super lock of all doors is set, super lock of all
doors is released, and simultaneously, all doors are unlocked.
Super Lock Release by Door Request Switch (Back Door)
When back door request switch is operated while super lock of all doors is set, super lock of all doors is
released, and simultaneously, back door are unlocked. When back door request switch is operated again
within 5 seconds of the 1st back door request switch operation, all doors are unlocked.
SUPER LOCK RELEASE OPERATION (UNLOCK OERATION) WITHOUT ANTI-HIJACK MODE
Super Lock Release by Intelligent Key
When Intelligent Key unlock button is operated while super lock of all doors is set, super lock of all doors is
released, and simultaneously, all doors are unlocked.
Super Lock Release by Door Request Switch
When door request switch (driver side, passenger side or back door) is operated while super lock of all doors
is set, super lock of all doors is released, and simultaneously, all doors are unlocked.
ANTI-HIJACK FUNCTION SETTING
With CONSULT-III
Anti-hijack function can be set to ON/OFF using CONSULT-III.
Refer to
DLK-41, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (With Super Lock)"
Without CONSULT-III
Anti-hijack function can be set to ON/OFF by user with a registered Intelligent Keyfob.
• ON/OFF can be switched when Intelligent Key lock button and unlock button are pressed simultaneously for
5 seconds or more while steering lock is locked.
• When mode is switched, hazard warning lamp blinks.
BACK DOOR OPEN FUNCTION
OFF
→
ON
: 1 blink
ON
→
OFF
: 3 blinks
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст