Juke F15 (2012 year). Service Repair Manual — part 80
DLK-272
< SYMPTOM DIAGNOSIS >
[TYPE 2]
DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH
SYMPTOM DIAGNOSIS
DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH
ALL DOOR REQUEST SWITCHES
ALL DOOR REQUEST SWITCHES : Description
INFOID:0000000006613137
All doors do not lock/unlock using all door request switches.
ALL DOOR REQUEST SWITCHES : Diagnosis Procedure
INFOID:0000000006613138
1.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent Key button?
YES
>> GO TO 2.
NO
>> Refer to
DLK-279, "Diagnosis Procedure"
.
2.
CHECK “LOCK/UNLOCK BY I-KEY” SETTING IN “WORK SUPPORT”
1.
Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.
2.
Select “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT” mode.
3.
Check “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.
Refer to
DLK-219, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (Without
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.
3.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
• Instrument center: Refer to
.
• Console: Refer to
• Luggage room: Refer to
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK OUTSIDE KEY ANTENNA
Check outside key antenna.
• Driver side: Refer to
• Passenger side: Refer to
.
• Rear bumper: Refer to
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
DRIVER SIDE DOOR REQUEST SWITCH
DRIVER SIDE DOOR REQUEST SWITCH : Description
INFOID:0000000006613139
All doors do not lock/unlock using driver side door request switch.
DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH
DLK-273
< SYMPTOM DIAGNOSIS >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DRIVER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure
INFOID:0000000006613140
1.
CHECK DRIVER SIDE DOOR REQUEST SWITCH
Check driver side door request switch.
Refer to
DLK-256, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK OUTSIDE KEY ANTENNA
Check outside key antenna (driver side).
Refer to
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
PASSENGER SIDE DOOR REQUEST SWITCH
PASSENGER SIDE DOOR REQUEST SWITCH : Description
INFOID:0000000006613141
All doors do not lock/unlock using passenger side door request switch.
PASSENGER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure
INFOID:0000000006613142
1.
CHECK PASSENGER SIDE DOOR REQUEST SWITCH
Check passenger side door request switch.
Refer to
DLK-256, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK OUTSIDE KEY ANTENNA
Check outside key antenna (passenger side).
Refer to
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
BACK DOOR REQUEST SWITCH
BACK DOOR REQUEST SWITCH : Description
INFOID:0000000006613143
All doors do not lock/unlock using back door request switch.
DLK-274
< SYMPTOM DIAGNOSIS >
[TYPE 2]
DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH
BACK DOOR REQUEST SWITCH : Diagnosis Procedure
INFOID:0000000006613144
1.
CHECK BACK DOOR REQUEST SWITCH
Check back door request switch.
Refer to
DLK-246, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK OUTSIDE KEY ANTENNA
Check outside key antenna (rear bumper).
Refer to
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
DOOR DOES NOT LOCK/UNLOCK WITH DRIVER SIDE DOOR LOCK KNOB OR
DOOR KEY CYLINDER
DLK-275
< SYMPTOM DIAGNOSIS >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR DOES NOT LOCK/UNLOCK WITH DRIVER SIDE DOOR LOCK
KNOB OR DOOR KEY CYLINDER
Diagnosis Procedure
INFOID:0000000006608101
1.
CHECK POWER DOOR LOCK OPERATION
Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?
YES
>> GO TO 2.
NO
>> Refer to
DLK-254, "Component Function Check"
2.
CHECK UNLOCK SENSOR
Check unlock sensor.
Refer to
DLK-270, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
DLK-276
< SYMPTOM DIAGNOSIS >
[TYPE 2]
DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH
DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK
SWITCH
ALL DOOR
ALL DOOR : Description
INFOID:0000000006613127
All doors do not lock/unlock using door lock and unlock switch.
ALL DOOR : Diagnosis Procedure
INFOID:0000000006613128
1.
CHECK DOOR LOCK AND UNLOCK SWITCH
Check door lock and unlock switch.
Refer to
DLK-254, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK DOOR LOCK ACTUATOR
Check front door lock assembly (driver side).
Refer to
DLK-249, "DRIVER SIDE : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK DOOR SWITCH
Check door switch.
Refer to
DLK-258, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
DRIVER SIDE
DRIVER SIDE : Description
INFOID:0000000006613129
Driver side door does not lock/unlock using door lock and unlock switch.
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000006613130
1.
CHECK DOOR LOCK ACTUATOR
Check front door lock assembly (driver side).
Refer to
DLK-249, "DRIVER SIDE : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH
DLK-277
< SYMPTOM DIAGNOSIS >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
PASSENGER SIDE
PASSENGER SIDE : Description
INFOID:0000000006613131
Passenger side door does not lock/unlock using door lock and unlock switch.
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000006613132
1.
CHECK DOOR LOCK ACTUATOR
Check front door lock assembly (passenger side).
Refer to
DLK-250, "PASSENGER SIDE : Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
REAR LH
REAR LH : Description
INFOID:0000000006613133
Rear LH side door does not lock/unlock using door lock and unlock switch.
REAR LH : Diagnosis Procedure
INFOID:0000000006613134
1.
CHECK DOOR LOCK ACTUATOR
Check rear door lock assembly LH.
Refer to
DLK-251, "REAR LH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
REAR RH
REAR RH : Description
INFOID:0000000006613135
Rear RH side door does not lock/unlock using door lock and unlock switch.
REAR RH : Diagnosis Procedure
INFOID:0000000006613136
1.
CHECK DOOR LOCK ACTUATOR
Check rear door lock assembly RH.
Refer to
DLK-252, "REAR RH : Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
DLK-278
< SYMPTOM DIAGNOSIS >
[TYPE 2]
DOOR DOES NOT LOCK/UNLOCK WITH DOOR LOCK AND UNLOCK SWITCH
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY
DLK-279
< SYMPTOM DIAGNOSIS >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY
Diagnosis Procedure
INFOID:0000000006613291
1.
CHECK DTC WITH BCM AND TCM
Check that DTC is not detected with BCM and TCM.
Is the inspection result normal?
YES
>> GO TO 2.
NO-1
>> Refer to
NO-2
>> Refer to
(RE0F10B models) or
(RE0F11A models).
(TCM)
2.
CHECK POWER DOOR LOCK OPERATION
Check door lock/unlock using door lock and unlock switch.
Does door lock/unlock using door lock and unlock switch?
YES
>> GO TO 3.
NO
>> Refer to
DLK-254, "Component Function Check"
3.
CHECK REMOTE KEYLESS ENTRY RECEIVER
Check remote keyless entry receiver.
Refer to
DLK-266, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK INTELLIGENT KEY
Check Intelligent Key.
Refer to
DLK-262, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
DLK-280
< SYMPTOM DIAGNOSIS >
[TYPE 2]
IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE
IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000006613295
1.
CHECK DTC WITH BCM
Check that DTC is not detected with BCM.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
2.
CHECK POWER DOOR LOCK OPERATION
Check power door lock operation.
Does door lock/unlock with driver side door lock knob and door key cylinder?
YES
>> GO TO 3.
NO
>> Refer to
DLK-276, "ALL DOOR : Diagnosis Procedure"
3.
CHECK DOOR SWITCH
Check door switch.
Refer to
DLK-258, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK UNLOCK SENSOR
Check unlock sensor.
Refer to
DLK-270, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
ANTI-HIJACK FUNCTION DOES NOT OPERATE
DLK-281
< SYMPTOM DIAGNOSIS >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
ANTI-HIJACK FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000006613124
1.
CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT-III.
2.
Select “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT” mode.
3.
Check “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”
Refer to
DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Set “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
DLK-282
< SYMPTOM DIAGNOSIS >
[TYPE 2]
BACK DOOR DOES NOT OPENED
BACK DOOR DOES NOT OPENED
Diagnosis Procedure
INFOID:0000000006613126
1.
CHECK BACK DOOR OPENER SWITCH
Check back door opener switch.
Refer to
DLK-244, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK BACK DOOR OPENER ACTUATOR
Check back door opener actuator.
Refer to
DLK-242, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK VEHICLE SPEED SIGNAL
Check vehicle speed signal.
Refer to
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CONFIRM THE OPERATION
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
DLK-283
< SYMPTOM DIAGNOSIS >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000006613125
1.
CHECK “AUTO LOCK SET” SETTING IN “WORK SUPPORT”
1.
Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.
2.
Select “AUTO LOCK SET” in “WORK SUPPORT” mode.
3.
Check “AUTO LOCK SET” in “WORK SUPPORT”.
Refer to
DLK-219, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (Without
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “AUTO LOCK SET” setting in “WORK SUPPORT”.
2.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
DLK-284
< SYMPTOM DIAGNOSIS >
[TYPE 2]
VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPERATE
VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPER-
ATE
Diagnosis Procedure
INFOID:0000000006613307
1.
CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT-III.
2.
Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to
DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
2.
CHECK “AUTOMATIC DOOR LOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT-III.
2.
Select “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.
Refer to
DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.
3.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE
DLK-285
< SYMPTOM DIAGNOSIS >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000006613294
1.
CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT-III.
2.
Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to
DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
2.
CHECK “AUTOMATIC DOOR UNLOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT-III.
2.
Select “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
Refer to
DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
3.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
DLK-286
< SYMPTOM DIAGNOSIS >
[TYPE 2]
P RANGE INTERLOCK DOOR LOCK/UNLOCK FUNCTION DOES NOT OPER-
ATE
P RANGE INTERLOCK DOOR LOCK/UNLOCK FUNCTION DOES NOT OP-
ERATE
Diagnosis Procedure
INFOID:0000000006613303
1.
CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT-III.
2.
Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
Refer to
DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”.
2.
CHECK “AUTOMATIC DOOR LOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT-III.
2.
Select “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.
Refer to
DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “AUTOMATIC DOOR LOCK SELECT” in “WORK SUPPORT”.
3.
CHECK “AUTOMATIC DOOR UNLOCK SELECT” SETTING IN “WORK SUPPORT”
1.
Select “DOOR LOCK” of “BCM” using CONSULT-III.
2.
Select “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT” mode.
3.
Check “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
Refer to
DLK-217, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK) (Without Super Lock)"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Set “AUTOMATIC DOOR UNLOCK SELECT” in “WORK SUPPORT”.
4.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
2.
Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
HAZARD AND BUZZER REMINDER DOES NOT OPERATE
DLK-287
< SYMPTOM DIAGNOSIS >
[TYPE 2]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
HAZARD AND BUZZER REMINDER DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000006613293
1.
CHECK DTC WITH BCM AND COMBINATION METER
Check that DTC is not detected with BCM and combination meter.
Is the inspection result normal?
YES
>> GO TO 2.
NO-1
>> Refer to
NO-2
>> Refer to
. (Combination meter)
2.
CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT”
1.
Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.
2.
Select “HAZARD ANSWER BACK” in “WORK SUPPORT” mode.
3.
Check the “HAZARD ANSWER BACK” in “WORK SUPPORT”.
Refer to
DLK-219, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (Without
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Set “HAZARD ANSWER BACK” in “WORK SUPPORT”.
3.
CHECK “ANS BACK I-KEY LOCK” SETTING IN “WORK SUPPORT”
1.
Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.
2.
Select “ANS BACK I-KEY LOCK” in “WORK SUPPORT” mode.
3.
Check the “ANS BACK I-KEY LOCK” in “WORK SUPPORT”.
Refer to
DLK-219, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (Without
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Set “ANS BACK I-KEY LOCK” in “WORK SUPPORT”.
4.
CHECK “ANS BACK I-KEY UNLOCK” SETTING IN “WORK SUPPORT”
1.
Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.
2.
Select “ANS BACK I-KEY UNLOCK” in “WORK SUPPORT” mode.
3.
Check the “ANS BACK I-KEY UNLOCK” in “WORK SUPPORT”.
Refer to
DLK-219, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (Without
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Set “ANS BACK I-KEY UNLOCK” in “WORK SUPPORT”.
5.
CHECK HAZARD FUNCTION
Check hazard function.
Refer to
EXL-72, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to
DLK-263, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace the malfunctioning parts.
7.
REPLACE BCM
1.
Replace BCM. Refer to
BCS-93, "Removal and Installation"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст