Juke F15 (2012 year). Service Repair Manual — part 16
BCS-112
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
ACTIVE TEST
MULTI REMOTE ENT
MULTI REMOTE ENT : CONSULT-III Function (BCM - MULTI REMOTE ENT) (With
Super Lock)
INFOID:0000000006747278
DATA MONITOR
Monitor item
[Unit]
Description
IGN ON SW
[On/Off]
Ignition switch (ON) status judges from IGN signal (ignition power supply)
KEY ON SW
[On/Off]
The switch status input from key switch
DOOR SW-DR
[On/Off]
The switch status input from front door switch (driver side)
DOOR SW-AS
[On/Off]
The switch status input from front door switch (passenger side)
DOOR SW-RR
[On/Off]
The switch status input from rear door switch RH
DOOR SW- RL
[On/Off]
The switch status input from rear door switch LH
BACK DOOR SW
[On/Off]
The switch status input from back door switch
LOCK STATUS
[On/Off]
The switch status input from door lock status switch (driver side)
CDL LOCK SW
[On/Off]
Lock switch status input from door lock and unlock switch
CDL UNLOCK SW
[On/Off]
Unlock switch status input from door lock and unlock switch
KEYLESS LOCK
[On/Off]
Lock signal status received from remote keyless entry receiver
KEYLESS UNLOCK
[On/Off]
Unlock signal status received from remote keyless entry receiver
TRNK/HAT MNTR
[On/Off]
NOTE:
The item is indicated, but not monitored
KEY CYL LK-SW
[On/Off]
NOTE:
The item is indicated, but not monitored
KEY CYL UN-SW
[On/Off]
NOTE:
The item is indicated, but not monitored
ACC ON SW
[On/Off]
Ignition switch (ACC) status judges from ACC signal (ACC power supply)
Test item
Operation
Description
INT LAMP
On
Outputs the interior room lamp control signal to turn the interior room lamps ON.
[Map lamp, room lamp (when applicable lamps switch is in DOOR position.)]
Off
Stops the interior room lamp control signal to turn the interior room lamps.
Monitor Item
Condition
IGN ON SW
Indicates [On/Off] condition of ignition switch in ON position
KEY ON SW
Indicates [On/Off] condition of key switch
ACC ON SW
Indicates [On/Off] condition of ignition switch in ACC position
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-113
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACTIVE TEST
WORK SUPPORT
KEYLESS LOCK
Indicates [On/Off] condition of lock signal from keyfob
KEYLESS UNLOCK
Indicates [On/Off] condition of unlock signal from keyfob
KYLS TRNK/HAT
NOTE:
This item is displayed, but cannot be tested
DOOR SW-DR
Indicates [On/Off] condition of front door switch (driver side)
DOOR SW-AS
Indicates [On/Off] condition of front door switch (passenger side)
DOOR SW-RR
Indicates [On/Off] condition of rear door switch RH
DOOR SW-RL
Indicates [On/Off] condition of rear door switch LH
BACK DOOR SW
Indicates [On/Off] condition of back door switch
TRNK/HAT MNTR
NOTE:
This item is displayed, but cannot be tested
CDL LOCK SW
Indicates [On/Off] condition of door lock and unlock switch
CDL UNLOCK SW
Indicates [On/Off] condition of door lock and unlock switch
KEYLESS PANIC
NOTE:
This item is displayed, but cannot be tested
Monitor Item
Condition
Test item
Description
INT LAMP
This test is able to check interior room lamp operation
• On: Operate
• Off: Non-operation
FLASHER
This test is able to check flasher operation [LH/RH/Off]
DOOR LOCK
This test is able to check door lock/unlock operation
• The all door lock actuators are locked when “ALL LCK” on CONSULT-III screen is touched
• The all door lock actuators are unlocked when “ALL UNLK” on CONSULT-III screen is touched
• The door lock actuator (driver side) is unlocked when “DR UNLK” on CONSULT-III screen is
touched
• The back door lock actuator is unlocked when “BD ULK” on CONSULT- III screen is touched
• The door lock actuator (other) is unlocked when “OTR ULK” on CONSULT-III screen is touched
Test item
Description
REMO CONT IN REGIST
Keyfob ID code can be registered
REMO CONT IN ERASUR
Keyfob ID code can be erased
REMO CONT IN CONFIR
It can be checked whether Keyfob ID code is registered or not in this mode
HAZARD LAMP SET
Hazard and horn reminder function (hazard operation) mode can be changed in this mode
• MODE1: Non-operation
• MODE2: Unlock operation only
• MODE3: Lock operation only
• MODE4: Lock and unlock operation
AUTO LOCK SET
Auto door lock time can be changed in this mode
• MODE 1: Non-operation
• MODE 2: 30 sec
• MODE 3: 1 minute
• MODE 4: 2 minute
• MODE 5: 3 minute
• MODE 6: 4 minute
• MODE 7: 5 minute
PANIC ALARM SET
NOTE:
This item is displayed, but cannot be tested
TRUNK OPEN SET
NOTE:
This item is displayed, but cannot be tested
BCS-114
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
MULTI REMOTE ENT : CONSULT-III Function (BCM - MULTI REMOTE ENT) (Without
Super Lock)
INFOID:0000000006747281
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
Monitor Item
Condition
IGN ON SW
Indicates [On/Off] condition of ignition switch in ON position
KEY ON SW
Indicates [On/Off] condition of key switch
ACC ON SW
Indicates [On/Off] condition of ignition switch in ACC position
KEYLESS LOCK
Indicates [On/Off] condition of lock signal from keyfob
KEYLESS UNLOCK
Indicates [On/Off] condition of unlock signal from keyfob
KYLS TRNK/HAT
NOTE:
This item is displayed, but cannot be tested
DOOR SW-DR
Indicates [On/Off] condition of front door switch (driver side)
DOOR SW-AS
Indicates [On/Off] condition of front door switch (passenger side)
DOOR SW-RR
Indicates [On/Off] condition of rear door switch RH
DOOR SW-RL
Indicates [On/Off] condition of rear door switch LH
BACK DOOR SW
Indicates [On/Off] condition of back door switch
TRNK/HAT MNTR
NOTE:
This item is displayed, but cannot be tested
CDL LOCK SW
Indicates [On/Off] condition of door lock and unlock switch
CDL UNLOCK SW
Indicates [On/Off] condition of door lock and unlock switch
KEYLESS PANIC
NOTE:
This item is displayed, but cannot be tested
Test item
Description
INT LAMP
This test is able to check interior room lamp operation
• On: Operate
• Off: Non-operation
FLASHER
This test is able to check flasher operation [LH/RH/Off]
DOOR LOCK
This test is able to check door lock/unlock operation
• The all door lock actuators are locked when “ALL LCK” on CONSULT-III screen is touched
• The all door lock actuators are unlocked when “ALL UNLK” on CONSULT-III screen is
touched
• The door lock actuator (driver side) is unlocked when “DR UNLK” on CONSULT-III screen
is touched
• The back door lock actuator is unlocked when “BD ULK” on CONSULT- III screen is touched
• The door lock actuator (other) is unlocked when “OTR ULK” on CONSULT-III screen is
touched
Test item
Description
REMO CONT IN REGIST
Keyfob ID code can be registered
REMO CONT IN ERASUR
Keyfob ID code can be erased
REMO CONT IN CONFIR
It can be checked whether Keyfob ID code is registered or not in this mode
HAZARD LAMP SET
Hazard and horn reminder function (hazard operation) mode can be changed in this mode
• MODE1: Non-operation
• MODE2: Unlock operation only
• MODE3: Lock operation only
• MODE4: Lock and unlock operation
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-115
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
HEADLAMP
HEADLAMP : CONSULT-III Function (BCM - HEAD LAMP)
INFOID:0000000006747287
WORK SUPPORT
*
1
: For models is without auto light system, this item is not displayed.
*
2
: Factory setting
DATA MONITOR
AUTO LOCK SET
Auto door lock time can be changed in this mode
• MODE 1: Non-operation
• MODE 2: 30 sec
• MODE 3: 1 minute
• MODE 4: 2 minute
• MODE 5: 3 minute
• MODE 6: 4 minute
• MODE 7: 5 minute
PANIC ALARM SET
NOTE:
This item is displayed, but cannot be tested
TRUNK OPEN SET
NOTE:
This item is displayed, but cannot be tested
Test item
Description
Service item
Setting item
Setting
CUSTOM A/LIGHT SET-
TING*
1
MODE 1*
2
Normal
MODE 2
More sensitive setting than normal setting (Turns ON earlier than normal opera-
tion.)
MODE 3
More sensitive setting than MODE 2 (Turns ON earlier than MODE 2.)
MODE 4
Without twilight ON custom & less sensitive setting than normal setting (Turns ON
later than normal operation.)
BATTERY SAVER SET
On*
2
With the exterior lamp battery saver function
Off
Without the exterior lamp battery saver function
HEAD LIGHT TIMER
MODE 1
10 sec.
Sets follow me home function activating time
MODE 2*
2
30 sec.
Monitor item
[Unit]
Description
IGN ON SW
[On/Off]
Ignition switch (ON) status judged from IGN signal (ignition power supply)
ACC SW
[On/Off]
Ignition switch (ACC) status judged from ACC signal (ACC power supply)
VEH SPEED
[km/h]
The value of the vehicle speed received from combination meter with CAN commu-
nication
BCS-116
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
*
1
: Only models with front fog lamp can be monitored.
*
2
: Only models with auto light system can be monitored.
ACTIVE TEST
HI BEAM SW
[On/Off]
Each switch status that BCM judges from the combination switch reading function
HEAD LAMP SW1
[On/Off]
HEAD LAMP SW2
[On/Off]
PASSING SW
[On/Off]
FR FOG SW*
1
[On/Off]
AUTO LIGHT SW*
2
[On/Off]
RR FOG SW
[On/Off]
DOOR SW-DR
[On/Off]
The switch status input from front door switch (driver side)
DOOR SW-AS
[On/Off]
The switch status input from front door switch (passenger side)
DOOR SW-RR
[On/Off]
The switch status input from rear door switch RH
DOOR SW- RL
[On/Off]
The switch status input from rear door switch LH
BACK DOOR SW
[On/Off]
The switch status input from back door switch
TURN SIGNAL R
[On/Off]
Each switch status that BCM judges from the combination switch reading function
TURN SIGNAL L
[On/Off]
TAIL LAMP SW
[On/Off]
KEY ON SW
[On/Off]
The switch status input from key on switch
KEYLESS LOCK
[On/Off]
Lock signal status received from remote keyless entry receiver (integrated in the
BCM)
PKB SW
[On/Off]
The parking brake switch status received from combination meter with CAN commu-
nication
ENGINE RUN
[On/Off]
The engine status received from ECM with CAN communication
LIG SEN COND
[On/Off/NG]
The sensor condition received from light & rain sensor
Monitor item
[Unit]
Description
Test item
Operation
Description
TAIL LAMP
On
Transmits the position light request signal to IPDM E/R with CAN com-
munication to turn the tail lamp ON.
Off
Stops the tail lamp request signal transmission.
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-117
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
*
1
: For models without front fog lamp, this item is displayed but active test is not operated.
*
2
: For models without daytime running light system, this item is not displayed.
WIPER
WIPER : CONSULT-III Function (BCM - WIPER)
INFOID:0000000006747291
WORK SUPPORT
*1: The item is indicated, but not operated on model with rain sensor
*2: The item is indicated, but not operated on model without rain sensor
*3: Factory setting
DATA MONITOR
HEAD LAMP
Hi
Transmits the high beam request signal with CAN communication to turn
the headlamp (HI).
Lo
Transmits the low beam request signal with CAN communication to turn
the headlamp (LO).
Off
Stops the high & low beam request signal transmission.
FR FOG LAMP*
1
On
Transmits the front fog lights request signal to IPDM E/R with CAN com-
munication to turn the front fog lamp ON.
Off
Stops the front fog lights request signal transmission.
RR FOG LAMP
On
• Outputs the voltage to turn the rear fog lamp ON.
• Transmits the rear fog lamp status signal to the combination meter with
CAN communication to turn the rear fog lamp indicator lamp ON.
Off
• Stops the voltage to turn the rear fog lamp OFF.
• Stops the rear fog lamp status signal transmission.
DAYTIME RUNNING LIGHT*
2
On
Transmits the daytime running light request signal via CAN communica-
tion to turn the parking, license plate and tail lamps ON.
Off
Stop the daytime running light request signal transmission.
Test item
Operation
Description
Service item
Setting item
Description
WIPER SPEED
SETTING*1
On*3
Linked with vehicle speed
(Front wiper intermittent time linked with the vehicle speed
and wiper intermittent dial position)
The setting of front wiper INT
operation can be changed
Off
Not linked with vehicle speed
(Front wiper intermittent time linked with the wiper intermit-
tent dial position)
RAIN SEN WIP
FUNC SET*2
On*3
With rain sensor
(Front wiper intermittent time linked with the rain sensor, ve-
hicle speed, and AUTO dial position)
The setting of front wiper
AUTO operation can be
changed
Off
Without rain sensor
(Front wiper intermittent time linked with the vehicle speed
and AUTO dial position)
Monitor Item
[Unit]
Description
IGN ON SW
[On/Off]
Ignition switch ON status judged from ignition power supply.
IGN SW CAN
[On/Off]
Ignition switch ON status received from IPDM E/R with CAN communication.
BCS-118
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
*: The item is displayed but is not monitored on model without rain sensor
ACTIVE TEST
FLASHER
FLASHER : CONSULT-III Function (BCM - FLASHER)
INFOID:0000000006747288
DATA MONITOR
FR WIPER HI
[On/Off]
Each switch status that BCM judges from the combination switch reading function.
FR WIPER LOW
[On/Off]
FR WIPER INT
[On/Off]
FR WASHER SW
[On/Off]
INT VOLUME
[1
−
7]
Each switch status that BCM judges from the combination switch reading function.
FR WIPER STOP
[On/Off]
Front wiper motor (stop position) status received from IPDM E/R with CAN communication.
VEHICLE SPEED
[km/h]
The value of the vehicle speed signal received from combination meter with CAN communication.
RR WIPER ON
[On/Off]
Each switch status that BCM judges from the combination switch reading function.
RR WIPER INT
[On/Off]
RR WASHER SW
[On/Off]
RR WIPER STOP
[On/Off]
Rear wiper motor (stop position) status input from the rear wiper motor.
REVERSE SW CAN
[On/Off]
Reverse position status as judged from TCM with CAN communication.
RAIN SENSOR*
[OFF/LOW/HIGH/SPLASH/NG]
Request signal from rain sensor detected by BCM is displayed
Monitor Item
[Unit]
Description
Test item
Operation
Description
FR WIPER
Hi
Transmits the front wiper request signal (HI) to IPDM E/R with CAN communication to
operate the front wiper HI operation.
Lo
Transmits the front wiper request signal (LO) to IPDM E/R with CAN communication to
operate the front wiper LO operation.
INT
Transmits the front wiper request signal (INT) to IPDM E/R with CAN communication to
operate the front wiper INT operation.
Off
Stops transmitting the front wiper request signal to stop the front wiper operation.
RR WIPER
On
Outputs the voltage to operate the rear wiper motor.
Off
Stops the voltage to stop.
HEADLAMP WASH-
ER
On
Transmits the headlamp washer request signal to IPDM E/R via CAN communication to
operate the headlamp washer operation.
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-119
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACTIVE TEST
AIR CONDITIONER
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Automatic
A/C 4WD Models)
INFOID:0000000006747296
DATA MONITOR
Display Item List
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Automatic
A/C 2WD Models)
INFOID:0000000006747297
DATA MONITOR
Display Item List
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Manual A/
C 4WD Models)
INFOID:0000000006747298
DATA MONITOR
Display item list
Monitor item
[Unit]
Description
IGN ON SW
[On/Off]
Ignition switch (ON) status judged from IGN signal (ignition power supply)
TURN SIGNAL R
[On/Off]
Each switch status that BCM detects from the combination switch reading function
TURN SIGNAL L
[On/Off]
HAZARD SW
[On/Off]
The switch status input from the hazard switch
Test item
Operation
Description
FLASHER
RH
Outputs the voltage to blink the right side turn signal lamps.
LH
Outputs the voltage to blink the left side turn signal lamps.
Off
Stops the voltage to turn the turn signal lamps OFF.
Monitor Item [Unit]
Contents
IGN SW
[On/Off]
Displays ignition switch position status as judged from ignition switch signal.
FAN ON SIG
[On/Off]
Displays the blower fan status as jugged from the A/C auto amp.
AIR COND SW
[On/Off]
Displays [COMP (On)/COMP (Off)] status as judged from the A/C auto amp.
Monitor Item [Unit]
Contents
IGN SW
[On/Off]
Displays ignition switch position status as judged from ignition switch signal.
FAN ON SIG
[On/Off]
Displays the blower fan status as jugged from the A/C auto amp.
AIR COND SW
[On/Off]
Displays [COMP (On)/COMP (Off)] status as judged from the A/C auto amp.
Monitor Item [Unit]
Contents
FAN ON SIG
[On/Off]
Displays blower motor status as judged from blower fan ON signal.
AIR COND SW
[On/Off]
Displays A/C switch status as judged from A/C switch signal.
THERMO AMP
[On/Off]
Displays thermo control amp. status as judged from thermo control amp. signal.
IGN SW
[On/Off]
Displays ignition switch position status as judged form ignition switch signal.
BCS-120
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
ACTIVE TEST
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Manual A/
C 2WD Models)
INFOID:0000000006747299
DATA MONITOR
Display item list
ACTIVE TEST
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER) (Heater and
Ventilation)
INFOID:0000000006747300
DATA MONITOR
Display item list
COMB SW
COMB SW : CONSULT-III Function (BCM - COMB SW)
INFOID:0000000006627742
DATA MONITOR
Test item
Operation
Description
A/C INDICATOR
On
A/C indicator is turned ON.
Off
A/C indicator is turned OFF.
Monitor Item [Unit]
Contents
FAN ON SIG
[On/Off]
Displays blower motor status as judged from blower fan ON signal.
AIR COND SW
[On/Off]
Displays A/C switch status as judged from A/C switch signal.
THERMO AMP
[On/Off]
Displays thermo control amp. status as judged from thermo control amp. signal.
IGN SW
[On/Off]
Displays ignition switch position status as judged form ignition switch signal.
Test item
Operation
Description
A/C INDICATOR
On
A/C indicator is turned ON.
Off
A/C indicator is turned OFF.
Monitor Item [Unit]
Contents
FAN ON SIG
[On/Off]
Displays blower motor status as judged from blower fan ON signal.
IGN SW
[On/Off]
Displays ignition switch position status as judged form ignition switch signal.
Monitor item [UNIT]
Description
TURN SIGNAL R
[Off/On]
Displays the status of TURN RH switch in combination switch judged by the combination switch reading func-
tion.
TURN SIGNAL L
[Off/On]
Displays the status of the TURN LH switch in combination switch judged by the combination switch reading
function.
HI BEAM SW
[Off/On]
Displays the status of HI BEAM switch in combination switch judged by the combination switch reading func-
tion.
HEAD LAMP SW 1
[Off/On]
Displays the status of HEADLAMP 1 switch in combination switch judged by the combination switch reading
function.
HEAD LAMP SW 2
[Off/On]
Displays the status of HEADLAMP 2 switch in combination switch judged by the combination switch reading
function.
TAIL LAMP SW
[Off/On]
Displays the status of TAIL LAMP switch in combination switch judged by the combination switch reading
function.
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-121
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
BCM
BCM : CONSULT-III Function (BCM - BCM)
INFOID:0000000006627743
WORK SUPPORT
IMMU
IMMU : CONSULT-III Function (BCM - IMMU)
INFOID:0000000006747285
WORK SUPPORT
ACTIVE TEST
BATTERY SAVER
BATTERY SAVER : CONSULT-III Function (BCM - BATTERY SAVER)
INFOID:0000000006747290
WORK SUPPORT
PASSING SW
[Off/On]
Displays the status of PASSING switch in combination switch judged by the combination switch reading func-
tion.
AUTO LIGHT SW
[Off/On]
Displays the status of the AUTO LIGHT switch in combination switch judged by BCM with the combination
switch reading function.
FR FOG SW
[Off/On]
Displays the status of FR FOG switch in combination switch judged by the combination switch reading func-
tion.
RR FOG SW
[Off/On]
Displays the status of RR FOG switch in combination switch judged by the combination switch reading func-
tion.
FR WIPER HI
[Off/On]
Displays the status of FR WIPER HI switch in combination switch judged by the combination switch reading
function.
FR WIPER LOW
[Off/On]
Displays the status of FR WIPER LOW switch in combination switch judged by the combination switch read-
ing function.
FR WIPER INT
[Off/On]
Displays the status of FR WIPER INT/AUTO switch in combination switch judged by the combination switch
reading function.
FR WASHER SW
[Off/On]
Displays the status of FR WASHER switch in combination switch judged by the combination switch reading
function.
INT VOLUME
[1 - 7]
Displays the status of wiper intermittent dial position judged by the combination switch reading function.
RR WIPER ON
[Off/On]
Displays the status of RR WIPER switch in combination switch judged by the combination switch reading
function.
RR WIPER INT
[Off/On]
Displays the status of RR WIPER INT switch in combination switch judged by the combination switch reading
function.
RR WASHER SW
[Off/On]
Displays the status of RR WASHER switch in combination switch judged by the combination switch reading
function.
Monitor item [UNIT]
Description
Item
Description
RESET SETTING VALUE
Return a value set with WORK SUPPORT of each system to a default value in factory shipment.
Service item
Description
CONFIRM DONGLE ID
It is possible to check that dongle unit is applied to the vehicle.
Test item
Description
THEFT IND
This test is able to check security indicator lamp operation. Security indicator lamp will be
turned on when “ON” on CONSULT-III screen is touched.
BCS-122
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
*:Factory setting
DATA MONITOR
ACTIVE TEST
*: Each lamp switch is in ON position.
TRUNK
Service item
Setting item
Setting
ROOM LAMP TIMER SET
MODE 1
30 min.
Sets the interior room lamp battery saver timer operating
time.
MODE 2
60 min.
MODE 3
*
15 min.
ROOM LAMP BAT SAV SET
On
*
With the interior room lamp battery saver function
Off
Without the interior room lamp battery saver function
Monitor item
[Unit]
Description
IGN ON SW
[On/Off]
Ignition switch (ON) status judges from IGN signal (ignition power supply)
KEY ON SW
[On/Off]
The switch status input from key switch
DOOR SW-DR
[On/Off]
The switch status input from front door switch (driver side)
DOOR SW-AS
[On/Off]
The switch status input from front door switch (passenger side)
DOOR SW-RR
[On/Off]
The switch status input from rear door switch RH
DOOR SW- RL
[On/Off]
The switch status input from rear door switch LH
BACK DOOR SW
[On/Off]
The switch status input from back door switch
LOCK STATUS
[On/Off]
The switch status input from door lock status switch (driver side)
CDL LOCK SW
[On/Off]
Lock switch status input from door lock and unlock switch
CDL UNLOCK SW
[On/Off]
Unlock switch status input from door lock and unlock switch
KEYLESS LOCK
[On/Off]
Lock signal status received from remote keyless entry receiver
KEYLESS UNLOCK
[On/Off]
Unlock signal status received from remote keyless entry receiver
TRNK/HAT MNTR
[On/Off]
NOTE:
The item is indicated, but not monitored
KEY CYL LK-SW
[On/Off]
NOTE:
The item is indicated, but not monitored
KEY CYL UN-SW
[On/Off]
NOTE:
The item is indicated, but not monitored
ACC ON SW
[On/Off]
Ignition switch (ACC) status judges from ACC signal (ACC power supply)
Test item
Operation
Description
BATTERY SAVER
Off
Cuts the interior room lamp power supply to turn interior room lamps OFF.
On
Outputs the interior room lamp power supply to turn interior room lamps ON.*
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-123
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
TRUNK : CONSULT-III Function (BCM - TRUNK) (With Super Lock)
INFOID:0000000006747279
DATA MONITOR
TRUNK : CONSULT-III Function (BCM - TRUNK) (Without Super Lock)
INFOID:0000000006747282
DATA MONITOR
THEFT ALM
THEFT ALM : CONSULT-III Function (BCM - THEFT)
INFOID:0000000006747284
WORK SUPPORT
ACTIVE TEST
SIGNAL BUFFER
Monitor Item
Contents
KEY ON SW
Indicates [On/Off] condition of key switch.
LOCK STATUS
Indicates [On/Off] condition of front door driver side.
VEHICLE SPEED
Indicates [Km/h] condition of vehicle speed signal from combination meter.
IGN ON SW
Indicates [On/Off] condition of ignition switch.
TRNK OPNR SW
NOTE:
This item is displayed, but cannot be monitored.
KYLS TRNK/HAT
NOTE:
This item is displayed, but cannot be monitored.
Monitor Item
Contents
KEY ON SW
Indicates [On/Off] condition of key switch.
LOCK STATUS
Indicates [On/Off] condition of front door driver side.
VEHICLE SPEED
Indicates [Km/h] condition of vehicle speed signal from combination meter.
IGN ON SW
Indicates [On/Off] condition of ignition switch.
TRNK OPNR SW
NOTE:
This item is displayed, but cannot be monitored.
KYLS TRNK/HAT
NOTE:
This item is displayed, but cannot be monitored.
Service Item
Description
SECURITY ALARM SET
This mode is able to confirm and change security alarm ON-OFF setting.
THEFT ALM TRG
The switch which triggered vehicle security alarm is recorded.
This mode is able to confirm and erase the record of vehicle security alarm.
The trigger data can be erased by touching “CLEAR” on CONSULT-III screen.
Test Item
Description
THEFT IND
This test is able to check security indicator lamp operation. Security indicator lamp will be
turned on when “ON” on CONSULT-III screen is touched.
VEHICLE SECURITY HORN
This test is able to check horn operation. Horn will be activated for 0.5 seconds after “ON” on
CONSULT-III screen is touched.
HEADLAMP (HI)
This test is able to check headlamp (HI) operation. Headlamps (HI) will be activated for 0.5
seconds after “ON” on CONSULT-III screen is touched.
FLASHER
This test is able to check hazard warning lamp operation. Hazard warning lamps will be acti-
vated after “LH” or “RH” on CONSULT-III screen is touched.
BCS-124
< SYSTEM DESCRIPTION >
[WITHOUT INTELLIGENT KEY SYSTEM]
DIAGNOSIS SYSTEM (BCM)
SIGNAL BUFFER : CONSULT-III Function (BCM - SIGNAL BUFFER)
INFOID:0000000006627747
DATA MONITOR
ACTIVE TEST
Monitor item [UNIT]
Description
OIL PRESS SW
[Off/On]
Displays the status of oil pressure switch received from IPDM E/R with CAN communication.
BRAKE SW
[Off/On]
Displays the switch status input from stop lamp switch.
Test item
Operation
Description
OIL PRESSURE SW
NOTE:
For gasoline engine mod-
els, this item is not used.
Off
OFF
On
BCM transmits the oil pressure switch signal to the combination meter via CAN com-
munication, which illuminates the oil pressure warning lamp in the combination meter.
BCS
BCM (BODY CONTROL MODULE)
BCS-125
< ECU DIAGNOSIS INFORMATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ECU DIAGNOSIS INFORMATION
BCM (BODY CONTROL MODULE)
Reference Value
INFOID:0000000006627748
VALUES ON THE DIAGNOSIS TOOL
Monitor Item
Condition
Value/Status
IGN ON SW
Ignition switch OFF or ACC
Off
Ignition switch ON
On
KEY ON SW
Mechanical key is removed from key cylinder
Off
Mechanical key is inserted to key cylinder
On
CDL LOCK SW
Door lock/unlock switch does not operate
Off
Press door lock/unlock switch to the lock side
On
CDL UNLOCK SW
Door lock/unlock switch does not operate
Off
Press door lock/unlock switch to the unlock side
On
DOOR SW-DR
Driver's door closed
Off
Driver's door opened
On
DOOR SW-AS
Passenger door closed
Off
Passenger door opened
On
DOOR SW-RR
Rear RH door closed
Off
Rear RH door opened
On
DOOR SW-RL
Rear LH door closed
Off
Rear LH door opened
On
BACK DOOR SW
Back door closed
Off
Back door opened
On
LOCK STATUS
Driver door is locked
Off
Driver door is unlocked
On
ACC ON SW
Ignition switch OFF
Off
Ignition switch ACC or ON
On
KEYLESS LOCK
“LOCK” button of key fob is not pressed
Off
“LOCK” button of key fob is pressed
On
KEYLESS UNLOCK
“UNLOCK” button of key fob is not pressed
Off
“UNLOCK” button of key fob is pressed
On
SHOCK SENSOR
Air bag deployment signal (NORMAL) is detected.
NOMAL
Air bag deployment signal (AIR BAG OPEN) is detected
On
Air bag deployment signal is not detected
Off
KEY CYL LK-SW
NOTE:
The item is indicated, but not used.
Off
KEY CYL UN-SW
NOTE:
The item is indicated, but not used.
Off
VEHICLE SPEED
While driving
Equivalent to speed-
ometer reading
REAR DEF SW
Rear window defogger switch OFF
Off
Rear window defogger switch ON
On
REVERSE SW CAN
NOTE:
The item is indicated, but not used.
Off
On
BCS-126
< ECU DIAGNOSIS INFORMATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
BCM (BODY CONTROL MODULE)
TAIL LAMP SW
Lighting switch OFF
Off
Lighting switch 1ST
On
FR FOG SW
Front fog lamp switch OFF
Off
Front fog lamp switch ON
On
BUCKLE SW
The seat belt (driver side) is fastened. [Seat belt switch (driver side) OFF]
Off
The seat belt (driver side) is unfastened. [Seat belt switch (driver side) ON]
On
TRNK/HAT MNTR
NOTE:
The item is indicated, but not monitored.
Off
ACC SW
Ignition switch OFF
Off
Ignition switch ACC or ON
On
KYLS TRNK/HAT
NOTE:
The item is indicated, but not monitored.
Off
KEYLESS PANIC
NOTE:
The item is indicated, but not monitored.
Off
HI BEAM SW
Lighting switch OFF
Off
Lighting switch HI
On
HEAD LAMP SW 1
Lighting switch OFF
Off
Lighting switch 2ND
On
HEAD LAMP SW 2
Lighting switch OFF
Off
Lighting switch 2ND
On
AUTO LIGHT SW
Lighting switch OFF
Off
Lighting switch AUTO
On
PASSING SW
Other than lighting switch PASS
Off
Lighting switch PASS
On
RR FOG SW
Rear fog lamp switch OFF
Off
Rear fog lamp switch ON
On
TURN SIGNAL R
Turn signal switch OFF
Off
Turn signal switch RH
On
TURN SIGNAL L
Turn signal switch OFF
Off
Turn signal switch LH
On
PKB SW
Parking brake switch is OFF
Off
Parking brake switch is ON
On
ENGINE RUN
Engine stopped
Off
Engine running
On
OPTI SEN (DTCT)
NOTE:
The item is indicated, but not monitored.
0 V
OPTI SEN (FILT)
NOTE:
The item is indicated, but not monitored.
0 V
LIG SEN COND
Bright outside of the vehicle
Off
Dark outside of vehicle
On
Light sensor internal error
NG
IGN SW CAN
Ignition switch OFF or ACC
Off
Ignition switch ON
On
FR WIPER HI
Front wiper switch OFF
Off
Front wiper switch HI
On
Monitor Item
Condition
Value/Status
BCS
BCM (BODY CONTROL MODULE)
BCS-127
< ECU DIAGNOSIS INFORMATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
FR WIPER LOW
Front wiper switch OFF
Off
Front wiper switch LO
On
FR WIPER INT
Front wiper switch OFF
Off
Front wiper switch INT
On
FR WASHER SW
Front washer switch OFF
Off
Front washer switch ON
On
INT VOLUME
Wiper intermittent dial is in a dial position 1 - 7
1 - 7
FR WIPER STOP
Any position other than front wiper stop position
Off
Front wiper stop position
On
RR WIPER ON
Rear wiper switch OFF
Off
Rear wiper switch ON
On
RR WIPER INT
Rear wiper switch OFF
Off
Rear wiper switch INT
On
RR WASHER SW
Rear washer switch OFF
Off
Rear washer switch ON
On
RR WIPER STOP
Rear wiper stop position
Off
Other than rear wiper stop position
On
RAIN SENSOR
No rain (or very light rain)
Off
Light rain
LOW
Heavy rain
HIGH
When liquid is splashed on the front window
SPLSH
Rain sensor internal error
NG
HAZARD SW
Hazard switch OFF
Off
Hazard switch ON
On
FAN ON SIG
Blower control dial OFF
Off
Other than blower control dial OFF
On
AIR COND SW
• Air conditioner OFF (A/C switch indicator OFF) (Automatic air conditioner)
• A/C switch OFF (Manual air conditioner)
Off
• Air conditioner ON (A/C switch indicator ON) (Automatic air conditioner)
• A/C switch ON (Manual air conditioner)
On
THERMO AMP
NOTE:
At models with automatic
air conditioner this item is
not monitored.
Ignition switch ON
Off
Evaporator is extremely low temperature
On
FR DEF SW
Other than A/C mode defroster ON position
Off
A/C mode defroster ON position
On
KEYLESS TRUNK
NOTE:
The item is indicated, but not monitored.
Off
TRNK OPNR SW
NOTE:
The item is indicated, but not monitored.
Off
TRNK OPN MNTR
NOTE:
The item is indicated, but not monitored.
Off
HOOD SW
Close the hood
Off
Open the hood
On
TRANSPONDER
Other than the ignition switch is ON by key registered to BCM.
Off
The ignition switch is ON by key registered to BCM.
On
Monitor Item
Condition
Value/Status
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст