Juke F15 (2012 year). Service Repair Manual — part 334
SRC-16
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (AIR BAG)
When driver air bag module (Item display 1) and satellite sensor RH (Item display2) are malfunctioning.
CONSULT-III Function
INFOID:0000000006439853
APPLICATION ITEM
CONSULT-III performs the following functions.
HOW TO ERASE SELF DIAGNOSTIC RESULTS
• “Self Diagnostic Result”
A current self-diagnostic result is displayed on CONSULT-III screen in real time.
After the malfunction is repaired completely, no malfunction is detected on “Self Diagnostic Result”.
• “SELF-DIAG [PAST]”
Return to “Self Diagnostic Result” CONSULT-III screen by touching the “BACK” key of CONSULT-III and
select “Self Diagnostic Result” in SELECT DIAG MODE. Touch “Erase” in “Self Diagnostic Result” mode.
NOTE:
If the memory of the malfunction in “SELF-DIAG [PAST]” is not erased, the user mode shows the system
malfunction by the illumination of the warning lamp even if the malfunction is repaired completely.
• “TROUBLE DIAG RECORD”
The memory of “TROUBLE DIAG RECORD” cannot be erased.
• “SELF-DIAG RESULT [CAN]”
Self-diagnosis result other than “SELF-DIAG RESULT [CAN]” is erased when touching “Erase”.
SPECIAL FUNCTION
CAUSE OF WARNING
This item indicates IGN low or high voltage condition.
The air bag warning lamp blink in user mode when the battery voltage is lowered to the voltage value (less
than 9 V or higher to the voltage more than 16V) at which the SRS cannot be operated normally. The air bag
warning lamp turns OFF after the battery voltage returns to normal status after blinking.
JMHIA0950GB
Diagnosis mode
Description
ECU Identification
Air bag diagnosis sensor unit ECU discriminated number (identification num-
ber) is displayed. Air bag diagnosis sensor unit has individual ECU discriminat-
ed number (identification number) based on model and equipment.
Self Diagnostic Result
The current self diagnosis results (also indicated with the number of air bag
warning lamp blinks in the diagnosis mode) are displayed on CONSULT-III
screen in real time. This refers to a malfunctioning part requiring repairs.
Refer to
Function Test
CAR COMPUTER DIAG.
Test result is indicated using “OK” or “NG” so that the customer recognizes eas-
ily.
Special function
SELF-DIAG [PAST]
Diagnosis results previously stored in the memory are displayed on CONSULT-
III screen. The stored results are not erased until memory erasing is executed.
TROUBLE DIAG RECORD
With TROUBLE DIAG RECORD, diagnosis results previously erased by a re-
set operation can be displayed on CONSULT-III screen.
SELF-DIAG RESULT [CAN]
Self-diagnosis result other than “SELF-DIAG RESULT [CAN]” is erased when
touching “Erase”.
CAUSE OF WARNING
It displays the cause of warning lamp illumination that is not recorded in mem-
ory.
DIAGNOSIS SYSTEM (AIR BAG)
SRC-17
< SYSTEM DESCRIPTION >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
In such a case, the DTC memory is not performed and changing to the self-diagnostic mode by IGN operation
cannot be performed while the air bag warning lamp illuminates. “NO DTC” is displayed even if the malfunc-
tioning parts are checked by CONSULT-III.
This function records the following items.
Display contents of CONSULT-III
Description
Air bag
IGN VOLT COND
“LOW” is displayed when IGN low or high voltage is detected. If not, “OK” is
displayed.
IGN VOLT TIME
Times of IGN low or high voltage is detected.
LOW V RECORED
Times of IGN ON after IGN low or high voltage is detected.
SRC-18
< ECU DIAGNOSIS INFORMATION >
DIAGNOSIS SENSOR UNIT
ECU DIAGNOSIS INFORMATION
DIAGNOSIS SENSOR UNIT
DTC Index
INFOID:0000000006439854
DTC
Diagnostic item
Explanation
Reference page
—
NO DTC IS DETECTED.
When malfunction is
indicated by the “AIR
BAG” warning lamp in
the user mode
Low battery voltage (Less than 9 V) or
high battery voltage (more than 16V)
SRC-16, "CON-
SULT-III Func-
tion"
Self-diagnostic result is not erased af-
ter repair
SRC-12, "On
Board Diagnosis
Function"
Intermittent malfunction is detected in
the past
GI-42, "Intermit-
tent Incident"
No malfunction is detected
—
B1001-B1015
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
•
•
•
B1023
PASS A/B INDCTR CKT
Passenger air bag OFF indicator circuit is open or shorted to
ground or the circuits are shorted each other
B1024
PASS A/B DEACT SW
Front passenger air bag deactivation switch unit is malfunction-
ing
.
B1026-B1031
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
B1033
B1034
CRASH ZONE SEN
[UNIT FAIL]
Crash zone sensor is malfunctioning
B1035
CRASH ZONE SEN
[COMM FAIL]
Crash zone sensor is malfunctioning
B1036
CRASH ZONE SEN
[UNMATCH]
Crash zone sensor is out of the specified specification
B1037
B1039
B1041
CRASH ZONE SENS1
Crash zone sensor is malfunctioning
B1042-B1047
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
B1049
B1054
DRIVER AIRBAG MODULE
[OPEN]
Driver air bag module circuit is open (including the spiral cable)
B1050
B1055
DRIVER AIRBAG MODULE
[VB-SHORT]
Driver air bag module circuit is shorted to power supply circuit
(including the spiral cable)
B1051
B1056
DRIVER AIRBAG MODULE
[GND-SHORT]
Driver air bag module circuit is shorted to ground (including the
spiral cable)
B1052
B1057
DRIVER AIRBAG MODULE
[SHORT]
Driver air bag module circuits are shorted to each other (includ-
ing spiral cable)
B1058-B1063
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
B1065
B1070
ASSIST A/B MODULE
[OPEN]
Passenger air bag module circuit is open
B1066
B1071
ASSIST A/B MODULE
[VB-SHORT]
Passenger air bag module circuit is shorted to power supply
circuit
DIAGNOSIS SENSOR UNIT
SRC-19
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
B1067
B1072
ASSIST A/B MODULE
[GND-SHORT]
Passenger air bag module circuit is shorted to ground
B1068
B1073
ASSIST A/B MODULE
[SHORT]
Passenger air bag module circuits are shorted to each other
B1074-B1079
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
B1080
B1096
DRIVER AIRBAG MODULE
[SHORT]
Driver air bag module circuits are shorted to each other (includ-
ing spiral cable)
B1081
PRE-TEN FRONT RH
[OPEN]
Front seat belt pre-tensioner RH circuit is open
B1082
PRE-TEN FRONT RH
[VB-SHORT]
Front seat belt pre-tensioner RH circuit is shorted to power
supply circuit
B1083
PRE-TEN FRONT RH
[GND-SHORT]
Front seat belt pre-tensioner RH circuit is shorted to ground
B1084
PRE-TEN FRONT RH
[SHORT]
Front seat belt pre-tensioner RH circuits are shorted to each
other
B1086
PRE-TEN FRONT LH
[OPEN]
Front seat belt pre-tensioner LH circuit is open
B1087
PRE-TEN FRONT LH
[VB-SHORT]
Front seat belt pre-tensioner LH circuit is shorted to power sup-
ply circuit
B1088
PRE-TEN FRONT LH
[GND-SHORT]
Front seat belt pre-tensioner LH circuit is shorted to ground
B1089
PRE-TEN FRONT LH
[SHORT]
Front seat belt pre-tensioner LH circuits are shorted to each
other
B1090-B1095
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
B1106-B1111
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
B1113
B1114
SATELLITE SENS RH
[UNIT FAIL]
Satellite sensor RH is malfunctioning
B1115
SATELLITE SENS RH
[COMM FAIL]
Satellite sensor RH is malfunctioning
B1116
SATELLITE SENS RH
[UNMATCH]
Satellite sensor RH is out of the specified specification
B1118
B1119
SATELLITE SENS LH
[UNIT FAIL]
Satellite sensor LH is malfunctioning
B1120
SATELLITE SENS LH
[COMM FAIL]
Satellite sensor LH is malfunctioning
B1121
SATELLITE SENS LH
[UNMATCH]
Satellite sensor LH is out of the specified specification
B1122-B1127
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
B1129
SIDE MODULE RH
[OPEN]
Side air bag module RH circuit is open
B1130
SIDE MODULE RH
[VB-SHORT]
Side air bag module RH circuit is shorted to power supply cir-
cuit
B1131
SIDE MODULE RH
[GND-SHORT]
Side air bag module RH circuit is shorted to ground
B1132
SIDE MODULE RH
[SHORT]
Side air bag module RH circuits are shorted to each other
B1134
SIDE MODULE LH
[OPEN]
Side air bag module LH circuit is open
DTC
Diagnostic item
Explanation
Reference page
SRC-20
< ECU DIAGNOSIS INFORMATION >
DIAGNOSIS SENSOR UNIT
B1135
SIDE MODULE LH
[VB-SHORT]
Side air bag module LH circuit is shorted to power supply circuit
B1136
SIDE MODULE LH
[GND-SHORT]
Side air bag module LH circuit is shorted to ground
B1137
SIDE MODULE LH
[SHORT]
Side air bag module LH circuits are shorted to each other
B1138-B1143
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
B1144
CONTROL UNIT
[MISS INSTALLATION]
Air bag diagnosis sensor unit is malfunctioning or out of the
specified specification
B1145
CURTAIN MODULE RH
[OPEN]
Curtain air bag module RH circuit is open
B1146
CURTAIN MODULE RH
[VB-SHORT]
Curtain air bag module RH circuit is shorted to power supply
circuit
B1147
CURTAIN MODULE RH
[GND-SHORT]
Curtain air bag module RH circuit is shorted to ground
B1148
CURTAIN MODULE RH
[SHORT]
Curtain air bag module RH circuits are shorted to each other
B1150
CURTAIN MODULE LH
[OPEN]
Curtain air bag module LH circuit is open
B1151
CURTAIN MODULE LH
[VB-SHORT]
Curtain air bag module LH circuit is shorted to power supply cir-
cuits
B1152
CURTAIN MODULE LH
[GND-SHORT]
Curtain air bag module LH circuit is shorted to ground
B1153
CURTAIN MODULE LH
[SHORT]
Curtain air bag module LH circuits are shorted to each other
B1154-B1159
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
B1170-B1175
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
B1177
PRE-TEN2 FRONT RH
[OPEN]
Lap pre-tensioner RH circuit is open
.
B1178
PRE-TEN2 FRONT RH
[VB-SHORT]
Lap pre-tensioner RH circuit is shorted to power supply circuit
.
B1179
PRE-TEN2 FRONT RH
[GND-SHORT]
Lap pre-tensioner RH circuit is shorted to ground
.
B1180
PRE-TEN2 FRONT RH
[SHORT]
Lap pre-tensioner RH circuits are shorted to each other
.
B1182
PRE-TEN2 FRONT LH
[OPEN]
Lap pre-tensioner LH circuit is open
B1183
PRE-TEN2 FRONT LH
[VB-SHORT]
Lap pre-tensioner LH circuit is shorted to power supply circuit
B1184
PRE-TEN2 FRONT LH
[GND-SHORT]
Lap pre-tensioner LH circuit is shorted to ground
B1185
PRE-TEN2 FRONT LH
[SHORT]
Lap pre-tensioner LH circuits are shorted to each other
B1186-B1191
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
B1202-B1207
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
B1209
FRONTAL COLLISION DETEC-
TION
Front seat belt pre-tensioner, driver air bag and passenger air
bag are deployed
DTC
Diagnostic item
Explanation
Reference page
DIAGNOSIS SENSOR UNIT
SRC-21
< ECU DIAGNOSIS INFORMATION >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
B1210
SIDE COLLISION DETECTION
Side air bag, curtain air bag and front seat belt pre-tensioner
are deployed
B1212-B1214
RH1 SAT-SENS
Satellite sensor RH is malfunctioning
B1215-B1217
LH1 SAT-SENS
Satellite sensor LH is malfunctioning
B1218-B1223
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
B1234-B1239
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
DTC
Diagnostic item
Explanation
Reference page
SRC-22
< WIRING DIAGRAM >
SRS AIR BAG SYSTEM
WIRING DIAGRAM
SRS AIR BAG SYSTEM
Wiring Diagram
INFOID:0000000006707008
For connector terminal arrangements, harness layouts, and alphabets in a
(option abbreviation; if not
described in wiring diagram), refer to
GI-12, "Connector Information/Explanation of Option Abbreviation"
.
JCHWA0444GB
SRS AIR BAG SYSTEM
SRC-23
< WIRING DIAGRAM >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
JCHWA0445GB
SRC-24
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORK FLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000006439856
OVERALL SEQUENCE
DETAILED FLOW
JMHIA1324GB
DIAGNOSIS AND REPAIR WORK FLOW
SRC-25
< BASIC INSPECTION >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
1.
INTERVIEW THE CUSTOMER FOR THE SYMPTOM
Interview the customer for the symptom (the condition and the environment when the incident/malfunction
occurs).
>> GO TO 2.
2.
CHECK SYMPTOM
Check the symptom from the customer information.
>> GO TO 3.
3.
CHECK WARNING LAMP OPERATION
Check air bag warning lamp operation in the user mode. Refer to
SRC-12, "On Board Diagnosis Function"
Are any malfunction detected?
YES
>> GO TO 5.
NO
>> GO TO 4.
4.
CHECK LOW VOLTAGE
Check low voltage with CONSULT-III (Special function). Refer to
SRC-16, "CONSULT-III Function"
Are any malfunction detected?
YES
>> GO TO 9.
NO
>> Check intermittent incident. Refer to
GI-42, "Intermittent Incident"
.
5.
CHECK SELF DIAGNOSTIC RESULTS
Check self diagnostic result with CONSULT-III or diagnosis mode.
If it is impossible to switch to diagnosis mode, follow the same procedure that DTC is not detected.
NOTE:
Perform the following procedure if DTC is detected.
• Record DTC (Print them out with CONSULT-III.)
• Erase self diagnostic result.
• Study the relationship between the malfunction that DTC or air bag warning lamp indicates and the symptom
that the customer describes.
• Check related service bulletins for information.
Is DTC detected?
YES
>> GO TO 6.
NO
>> GO TO 7.
6.
PERFORM DTC CONFIRMATION PROCEDURE
Perform DTC CONFIRMATION PROCEDURE for the DTC.
>> GO TO 8.
7.
PERFORM DIAGNOSIS ACCORDING TO WARNING LAMP OPERATION
1.
Check air bag warning lamp operation in the user mode. Refer to
SRC-12, "On Board Diagnosis Func-
2.
Perform Diagnosis Procedure for the air bag warning lamp operation. Refer to
(USER MODE).
>> GO TO 9.
8.
DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Inspect according to Diagnostic Procedure of the DTC.
>> GO TO 9.
9.
REPAIR OR REPLACE THE MALFUNCTION PART
SRC-26
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORK FLOW
Repair or replace the malfunctioning part.
>> GO TO 10.
10.
FINAL CHECK
Check self diagnostic result and air bag warning lamp operation in the user mode.
Is the malfunction repaired?
YES
>> INSPECTION END
NO
>> GO TO 2.
U1000 CAN COMM CIRCUIT
SRC-27
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
DTC/CIRCUIT DIAGNOSIS
U1000 CAN COMM CIRCUIT
Description
INFOID:0000000006439857
CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Modern
vehicle is equipped with many electronic control unit, and each control unit shares information and links with
other control units during operation (not independent). In CAN communication, control units are connected
with 2 communication lines (CAN H-line, CAN L-line) allowing a high rate of information transmission with less
wiring. Each control unit transmits/receives data but selectively reads required data only.
CAN Communication Signal Chart. Refer to
LAN-31, "CAN COMMUNICATION SYSTEM : CAN Communica-
DTC Logic
INFOID:0000000006439858
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000006439859
1.
PERFORM SELF DIAGNOSTIC
1.
Turn ignition switch ON and wait for 2 seconds or more.
2.
Check “SELF-DIAG [CAN]” in “special function” of “AIR BAG” using CONSULT-III.
Is DTC “U1000” displayed?
YES
>> Refer to
LAN-17, "Trouble Diagnosis Flow Chart"
NO
>> Refer to
GI-42, "Intermittent Incident"
.
DTC
CONSULT-III display
description
DTC Detection Condition
Possible cause
U1000
CAN COMM CIRCUIT
When air bag diagnosis sensor unit cannot
communicate CAN communication signal
continuously for 2 seconds or more.
CAN communication system
SRC-28
< DTC/CIRCUIT DIAGNOSIS >
U1010 CONTROL UNIT (CAN)
U1010 CONTROL UNIT (CAN)
DTC Logic
INFOID:0000000006439860
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000006439861
1.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
When DTC “U1010” is detected, replace Air bag diagnosis sensor unit.
>> Replace Air bag diagnosis sensor unit. Refer to
SR-30, "Removal and Installation"
DTC
CONSULT-III display de-
scription
DTC Detection Condition
Possible cause
U1010
CONTROL UNIT (CAN)
Air bag diagnosis sensor unit detected internal CAN communica-
tion circuit malfunction.
Air bag diagnosis sensor unit
B1001, B1002, B1003, B1004, B1005 DIAGNOSIS SENSOR UNIT
SRC-29
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
B1001, B1002, B1003, B1004, B1005 DIAGNOSIS SENSOR UNIT
DTC Logic
INFOID:0000000006439862
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF-DIAG RESULT
With CONSULT-III
1.
Turn ignition switch ON.
2.
Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III.
Without CONSULT-III
1.
Turn ignition switch ON.
2.
Check the air bag warning lamp status. Refer to
SRC-12, "On Board Diagnosis Function"
.
NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.
Is malfunctioning part detected?
YES
>> Refer to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000006439863
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait 3 minutes
or more. (To discharge backup capacitor.)
• Never use unspecified tester or other measuring device.
1.
CHECK HARNESS CONNECTOR
Check the harness connector.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace harness connectors.
2.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace wiring harness.
3.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
1.
Replace air bag diagnosis sensor unit. Refer to
SR-30, "Removal and Installation"
2.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 1.
NO
>> INSPECTION END
DTC
Display contents of
CONSULT-III
DTC detecting condition
Possible cause
B1001
B1002
B1003
B1004
B1005
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
Malfunction in air bag diagnosis sensor unit
SRC-30
< DTC/CIRCUIT DIAGNOSIS >
B1006, B1007, B1008, B1009, B1010 DIAGNOSIS SENSOR UNIT
B1006, B1007, B1008, B1009, B1010 DIAGNOSIS SENSOR UNIT
DTC Logic
INFOID:0000000006439864
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF-DIAG RESULT
With CONSULT-III
1.
Turn ignition switch ON.
2.
Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III.
Without CONSULT-III
1.
Turn ignition switch ON.
2.
Check the air bag warning lamp status. Refer to
SRC-12, "On Board Diagnosis Function"
NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.
Is malfunctioning part detected?
YES
>> Refer to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000006439865
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait 3 minutes
or more. (To discharge backup capacitor.)
• Never use unspecified tester or other measuring device.
1.
CHECK HARNESS CONNECTOR
Check the harness connector.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace harness connectors.
2.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace wiring harness.
3.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
1.
Replace air bag diagnosis sensor unit. Refer to
SR-30, "Removal and Installation"
2.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 1.
NO
>> INSPECTION END
DTC
Display contents of
CONSULT-III
DTC detecting condition
Possible cause
B1006
B1007
B1008
B1009
B1010
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
Malfunction in air bag diagnosis sensor unit
B1011, B1012, B1013, B1014, B1015 DIAGNOSIS SENSOR UNIT
SRC-31
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
B1011, B1012, B1013, B1014, B1015 DIAGNOSIS SENSOR UNIT
DTC Logic
INFOID:0000000006439866
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF-DIAG RESULT
With CONSULT-III
1.
Turn ignition switch ON.
2.
Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III.
Without CONSULT-III
1.
Turn ignition switch ON.
2.
Check the air bag warning lamp status. Refer to
SRC-12, "On Board Diagnosis Function"
.
NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.
Is malfunctioning part detected?
YES
>> Refer to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000006439867
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait 3 minutes
or more. (To discharge backup capacitor.)
• Never use unspecified tester or other measuring device.
1.
CHECK HARNESS CONNECTOR
Check the harness connector.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace harness connectors.
2.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace wiring harness.
3.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
1.
Replace air bag diagnosis sensor unit. Refer to
SR-30, "Removal and Installation"
2.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 1.
NO
>> INSPECTION END
DTC
Display contents of
CONSULT-III
DTC detecting condition
Possible cause
B1011
B1012
B1013
B1014
B1015
CONTROL UNIT
Air bag diagnosis sensor unit is malfunctioning
Malfunction in air bag diagnosis sensor unit
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст