Juke F15 (2012 year). Service Repair Manual — part 315

REAR SEAT (4WD)

SE-41

< REMOVAL AND INSTALLATION >

REAR SEAT (4WD)

Exploded View

INFOID:0000000006384862

Seatback board RH

Headrest

Headrest holder (locked)

Headrest holder (free)

Seatback trim RH

Seatback pad RH

Seatback lock knob

Seatback lock knob finisher

Seatback lock assembly RH

JMJIA4584GB

SE-42

< REMOVAL AND INSTALLATION >

REAR SEAT (4WD)

SEAT CUSHION

SEAT CUSHION : Removal and Installation

INFOID:0000000006418496

REMOVAL

Lift up seat cushion at a close position (B) of engaging portion (A) and disengage seat cushion hook.

CAUTION:

Seat cushion wire close to engaging portion deforms, if excessive force is applied to seat cushion
front end when removing seat cushion.
To avoid the deformation, be careful to remove seat cushion while applying force to close posi-
tion, as much as possible, of engaging portion.

Pull out seat belt buckle from seat cushion.

Remove seat cushion from the vehicle.

CAUTION:

When removing and installing, use shop cloths to protect parts from damage.

INSTALLATION

Note the following item, and install in the reverse order of removal.

CAUTION:

When removing and installing, use shop cloths to protect parts from damage.

SEAT CUSHION : Disassembly and Assembly

INFOID:0000000006418497

DISASSEMBLY

Remove hog rings, and separate the seat cushion trim and seat cushion pad.

CAUTION:

Before performing separating operation, check the installation position of hog rings.

ASSEMBLY

Note the following item, and assemble in the reverse order of disassembly.

CAUTION:

Always install the hog ring in position.

10. Seat lock cover RH

11.

Bush

12. Side hinge

13. Spacer

14. Lock washer

15. Striker RH

16. Seat cushion hook

17. Seat cushion pad

18. Seat cushion trim

19. Striker LH

20. Seatback lock assembly LH

21. Seat lock cover LH

22. Seatback pad LH

23. Seatback trim LH

24. Center headrest

25. Seatback board LH

26. Seatback silencer LH

27. Seatback silencer RH

28. Seatback tether cover

29. Center seat belt finisher

30. Center hinge

31. Seat belt buckle

32. Center seat belt

33. Seatback frame RH

34. Seatback frame LH

: Pawl

: Metal clip

: N·m (kg-m, ft-lb)

: Vehicle front

JMJIA4835ZZ

REAR SEAT (4WD)

SE-43

< REMOVAL AND INSTALLATION >

SEATBACK

SEATBACK : Removal and Installation

INFOID:0000000006418492

LH SIDE SEATBACK

Removal

CAUTION:

Remove seatback with seat cushion installed.
1.

Temporarily move seat cushion to the position where center anchor of center seat belts can be removed.

Remove center anchor mounting bolt of center seat belt. Remove center anchor.

Return seat cushion to the normal position.

Unlock seatback lock assembly. Tilt seatback toward vehicle front. Remove headrests.

Fold seatback toward vehicle front.

Pull up seatback carpet (A). Remove mounting bolts (B) of seat-
back hinge portion.

Remove seatback from the vehicle.

CAUTION:

When removing and installing, use shop cloths to protect parts from damage.

Installation

Note the following items, and install in the reverse order of removal.

CAUTION:

• When removing and installing, use shop cloths to protect parts from damage.
• Install seat cushion to the vehicle, and then install seatback.
• Temporarily tighten bolts, fold up seatback, check that lock and striker do not interfere, and then

tighten bolts.

• When installing seatback, tighten mounting bolts according to

the numerical order (1, 2, 3, and 4 as shown in the figure).

RH SIDE SEATBACK

Removal

CAUTION:

Remove seatback with seat cushion installed.

Unlock seatback lock assembly. Tilt seatback toward vehicle front. Remove headrests.

Fold seatback toward vehicle front.

JMJIA4836ZZ

JMJIA4837ZZ

SE-44

< REMOVAL AND INSTALLATION >

REAR SEAT (4WD)

Pull up seatback carpet (A). Remove mounting bolts (B) of seat-
back hinge portion.

Remove seatback from the vehicle.

CAUTION:

When removing and installing, use shop cloths to protect parts from damage.

Installation

Note the following items, and install in the reverse order of removal.

CAUTION:

tighten bolts.

• When installing seatback, tighten mounting bolts according to

the numerical order (1, 2, 3, and 4 as shown in the figure).

SEATBACK : Disassembly and Assembly

INFOID:0000000006418493

DISASSEMBLY

LH side seatback

Remove headrest holder.
1.

Pull seat lock cover in direction indicated by the arrow as
shown in the figure. Remove seat lock cover.

JMJIA4838ZZ

JMJIA4839ZZ

: Metal clip

JMJIA4372ZZ

REAR SEAT (4WD)

SE-45

< REMOVAL AND INSTALLATION >

Pull tether cover in direction indicated by the arrow as
shown in the figure. Remove tether cover.

Open seatback fastener (A) and remove seatback retainer
(B).

Slide and align the clips (B) to the holes on the seatback as
shown in the figure, and then remove the seatback board
(A).

Use pincers, etc., to press up pawls as shown by the arrows
in the figure, and remove headrest holder from seatback.

CAUTION:

Before installing headrest holder check its orientation.
(front/rear and right/left)

Remove seatback lock knob finisher.

: Pawl

JMJIA4611ZZ

JMJIA4371ZZ

JMJIA4076ZZ

PIIB4084J

SE-46

< REMOVAL AND INSTALLATION >

REAR SEAT (4WD)

Rotate seatback lock knob counterclockwise. Remove seat-
back lock knob.

Push up seatback lock knob finisher while pressing pawls
indicated by arrows as shown in the figure. Remove seat-
back lock finisher from seatback.

CAUTION:

When installing seatback lock knob finisher, check
front and rear orientation and be careful to install it nor-
mally.

Remove center seat belt finisher from seatback.
Lift up front of center seat belt finisher. Disengage front pawls.
Pull center seat belt finisher toward seat front. Disengage rear
pawls.

Juke F15 (2012 year). Service Repair Manual — part 315

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.