Nissan Versa Sedan. Manual — part 892

WCS-10

< SYSTEM DESCRIPTION >

DIAGNOSIS SYSTEM (COMBINATION METER)

DIAGNOSIS SYSTEM (COMBINATION METER)

TYPE A
TYPE A : Diagnosis Description

INFOID:0000000009507070

ON BOARD DIAGNOSIS ITEM

The information display, speedometer and tachometer can be checked in self-diagnosis mode.

NOTE:

• Check combination meter power supply and ground circuits if self-diagnosis mode does not start. Refer to

MWI-94, "COMBINATION METER : Diagnosis Procedure"

. Replace combination meter if power supply and

ground circuits are found to be normal and self-diagnosis mode does not start. Refer to

MWI-104, "Removal

and Installation"

.

• Combination meter self-diagnosis mode will function with the ignition switch in ON. Combination meter self-

diagnosis mode will exit upon turning the ignition switch to OFF.

METHOD OF STARTING

1. Turn the ignition switch OFF.

2. Turn the ignition switch ON while pressing and holding the

switch (1) for 0.8 seconds or more.

3. Press the switch at least 3 times. (Within 7 seconds after the ignition switch is turned ON.)
4. The combination meter is turned to self-diagnosis mode.

• All segments of the information display are displayed.

JSNIA3917ZZ

JSNIA3891ZZ

WCS

DIAGNOSIS SYSTEM (COMBINATION METER)

WCS-11

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

5. Each meter activates by pressing the switch.

NOTE:

• If any of the meters or gauges is not activated, replace combination meter.

• The figure is reference.

TYPE A : CONSULT Function

INFOID:0000000009507071

APPLICATION ITEMS

CONSULT can display each diagnostic item using the diagnostic test modes shown.

SELF DIAG RESULT

Refer to

MWI-75, "DTC Index"

.

DATA MONITOR

Display Item List

X: Applicable

JSNIA3903ZZ

METER/M&A Diagnosis mode

Description

SELF DIAGNOSTIC RESULT

The combination meter self-diagnosis results.

DATA MONITOR

Displays combination meter input/output data in real time.

SPECIAL FUNCTION

Lighting history of the warning lamp and indicator lamp can be checked.

CAN DIAG SUPPORT MNTR

The result of transmit/receive diagnosis of CAN communication can be read.

Display item [Unit]

MAIN

SIGNALS

Description

SPEED METER
[km/h] or [mph]

X

Displays the value of vehicle speed signal.

SPEED OUTPUT
[km/h] or [mph]

X

Displays the value of vehicle speed signal, which is transmitted to each unit with
CAN communication.

ODO OUTPUT
[km/h or mph]

Displays odometer signal value transmitted to other units via CAN communica-
tion.

TACHO METER
[rpm]

X

Displays the value of engine speed signal, which is input from ECM.

FUEL METER
[L]

X

Displays the fuel level.

W TEMP METER
[

°C] or [°F]

X

Displays the value of engine coolant temperature signal, which is input from ECM.

ABS W/L
[ON/OFF]

Displays [ON/OFF] condition of ABS warning indicator

WCS-12

< SYSTEM DESCRIPTION >

DIAGNOSIS SYSTEM (COMBINATION METER)

NOTE:

BRAKE W/L
[ON/OFF]

Displays [ON/OFF] condition of brake warning indicator.

DOOR W/L
[ON/OFF]

Displays [ON/OFF] condition of door warning indicator.

HI-BEAM IND
[ON/OFF]

Displays [ON/OFF] condition of high beam indicator.

TURN IND
[ON/OFF]

Displays [ON/OFF] condition of turn indicator.

LIGHT IND
[ON/OFF]

Displays [ON/OFF] condition of light indicator.

OIL W/L
[ON/OFF]

Displays [ON/OFF] condition of oil pressure warning indicator.

MIL
[ON/OFF]

Displays [ON/OFF] condition of malfunction indicator.

CRUISE IND
[Off]

Displays [ON/OFF] condition of CRUISE indicator.

O/D OFF IND
[ON/OFF]

Displays [ON/OFF] condition of O/D OFF indicator.

FUEL W/L
[ON/OFF]

Displays [ON/OFF] condition of low-fuel warning indicator.

O/D OFF SW
[ON/OFF]

Displays [ON/OFF] condition of O/D OFF switch.

REAR DEF SW
[ON/OFF]

Displays [ON/OFF] condition of rear window defogger switch.

BRAKE SW
[ON/OFF]

Displays [ON/OFF] condition of brake switch.

EPS W/L
[ON/OFF]

Displays [ON/OFF] condition of EPS indicator.

CHAGE W/L
[Off]

Displays [ON/OFF] condition of charge warning indicator.

SHIFT IND

Displays shift selector position.

FUEL CAP W/L
[Off]

Displays [ON/OFF] condition of loose fuel cap warning message.

AIR PRES W/L
[ON/OFF]

Displays [ON/OFF] condition of tire pressure warning lamp.

PKB SW
[ON/OFF]

Status of parking brake switch.

BUCKLE SW
[ON/OFF]

Status of seat belt buckle switch (LH).

PASS BUCKLE SW
[ON/OFF]

Status of passenger seat belt buckle switch (RH).

BRAKE OIL SW
[ON/OFF]

Status of brake fluid level switch.

DISTANCE
[km] or [Mi]

Displays distance to empty.

BUZZER
[ON/OFF]

X

Displays [ON/OFF] condition of buzzer.

SLIP IND
[ON/OFF]

Displays [ON/OFF] condition of SLIP indicator lamp.

VDC/TCS IND
[ON/OFF]

Displays [ON/OFF] condition of VDC OFF indicator lamp.

Display item [Unit]

MAIN

SIGNALS

Description

WCS

DIAGNOSIS SYSTEM (COMBINATION METER)

WCS-13

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

Some items are not available according to vehicle specification.

SPECIAL FUNCTION

Special menu

W/L ON HISTORY

• Stores histories when warning/indicator lamp is turned on.

• “W/L ON HISTORY” indicates the “TIME” when the warning/ indicator lamp is turned on.

• The “TIME” above is:

- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine

and waiting for 30 seconds.

- 1 - 39: The number of times the engine was restarted after the 0 condition.

- NO W/L ON HISTORY: Stores NO (0) turning on history of warning/indicator lamp.

NOTE:

• W/L ON HISTORY is not stored for approximately 30 seconds after the engine starts.

• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets

low.

Display Item

TYPE B
TYPE B : Diagnosis Description

INFOID:0000000009507072

COMBINATION METER SELF-DIAGNOSIS MODE

The information display, speedometer and tachometer can be checked in self-diagnosis mode.

STARTING COMBINATION METER SELF-DIAGNOSIS MODE

NOTE:

• Check combination meter power supply and ground circuits if self-diagnosis mode does not start. Refer to

MWI-94, "COMBINATION METER : Diagnosis Procedure"

. Replace combination meter if power supply and

ground circuits are found to be normal and self-diagnosis mode does not start. Refer to

MWI-104, "Removal

and Installation"

.

• Combination meter self-diagnosis mode will function with the ignition switch in ON. Combination meter self-

diagnosis mode will exit upon turning the ignition switch to OFF.

How to Initiate Self-Diagnosis Mode

Display item

Description

W/L ON HISTORY

Lighting history of warning lamp and indicator lamp can be checked.

Display item

Description

ABS W/L

Lighting history of ABS warning lamp.

VDC/TCS IND

Lighting history of VDC warning lamp.

SLIP IND

Lighting history of SLIP warning lamp.

BRAKE W/L

Lighting history of brake warning lamp.

OIL W/L

Lighting history of oil pressure warning lamp.

C-ENG W/L

Lighting history of malfunction indicator lamp (MIL).

AIR PRES W/L

Lighting history of tire pressure warning lamp.

EPS W/L

Lighting history of EPS warning lamp.

CHAGE W/L

Lighting history of charging warning lamp.

DOOR W/L

Lighting history of door warning lamp.

CRUISE W/L

Lighting history of cruise warning lamp.

O/D OFF IND

Lighting history of O/D OFF indicator lamp.

FUEL W/L

Lighting history of fuel warning lamp.

WASHER W/L

Lighting history of washer warning lamp.