Nissan Versa Sedan. Manual — part 893
WCS-14
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
1. Turn ignition switch ON, press the odo/trip meter switch (1) to “trip A” or “trip B”.
2. Turn ignition switch to OFF.
3. Continue holding the odo/trip meter switch (1) and turn the igni-
tion switch ON.
4. Verify the trip meter displays “0000.0”.
5. Press the meter control switch at least 3 times. (Within 7 sec-
onds after the ignition switch is turned ON).
6. The combination meter self-diagnosis mode is activated.
• Verify all segments of the information display and shift position
indicator (A) for CVT models are displayed.
7. Each meter activates by pressing the meter control switch.
NOTE:
• If any of the meters or gauges is not activated, replace combination meter.
• The figure is reference.
TYPE B : CONSULT Function
INFOID:0000000009507073
APPLICATION ITEMS
CONSULT can display each diagnostic item using the diagnostic test modes shown.
JSNIA3904ZZ
JSNIA3900ZZ
AWNIA2440ZZ
METER/M&A Diagnosis mode
Description
SELF DIAGNOSTIC RESULT
The combination meter self-diagnosis results.
DATA MONITOR
Displays combination meter input/output data in real time.
SPECIAL FUNCTION
Lighting history of the warning lamp and indicator lamp can be checked.
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read.
WCS
DIAGNOSIS SYSTEM (COMBINATION METER)
WCS-15
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SELF DIAG RESULT
.
DATA MONITOR
Display Item List
X: Applicable
Display item [Unit]
MAIN
SIGNALS
Description
SPEED METER
[km/h] or [mph]
X
Displays the value of vehicle speed signal.
SPEED OUTPUT
[km/h] or [mph]
X
Displays the value of vehicle speed signal, which is transmitted to each unit with
CAN communication.
ODO OUTPUT
[km/h or mph]
Displays odometer signal value transmitted to other units via CAN communica-
tion.
TACHO METER
[rpm]
X
Displays the value of engine speed signal, which is input from ECM.
FUEL METER
[L]
X
Displays the fuel level.
W TEMP METER
[
°C] or [°F]
X
Displays the value of engine coolant temperature signal, which is input from ECM.
ABS W/L
[ON/OFF]
Displays [ON/OFF] condition of ABS warning indicator
BRAKE W/L
[ON/OFF]
Displays [ON/OFF] condition of brake warning indicator.
DOOR W/L
[ON/OFF]
Displays [ON/OFF] condition of door warning indicator.
HI-BEAM IND
[ON/OFF]
Displays [ON/OFF] condition of high beam indicator.
TURN IND
[ON/OFF]
Displays [ON/OFF] condition of turn indicator.
LIGHT IND
[ON/OFF]
Displays [ON/OFF] condition of light indicator.
OIL W/L
[ON/OFF]
Displays [ON/OFF] condition of oil pressure warning indicator.
MIL
[ON/OFF]
Displays [ON/OFF] condition of malfunction indicator.
CRUISE IND
[Off]
Displays [ON/OFF] condition of CRUISE indicator.
O/D OFF IND
[ON/OFF]
Displays [ON/OFF] condition of O/D OFF indicator.
FUEL W/L
[ON/OFF]
Displays [ON/OFF] condition of low-fuel warning indicator.
KEY G/Y W/L
[ON/OFF]
Displays [ON/OFF] condition of key warning lamp.
O/D OFF SW
[ON/OFF]
Displays [ON/OFF] condition of O/D OFF switch.
REAR DEF SW
[ON/OFF]
Displays [ON/OFF] condition of rear window defogger switch.
BRAKE SW
[ON/OFF]
Displays [ON/OFF] condition of brake switch.
EPS W/L
[ON/OFF]
Displays [ON/OFF] condition of EPS indicator.
CHAGE W/L
[Off]
Displays [ON/OFF] condition of charge warning indicator.
WCS-16
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (COMBINATION METER)
NOTE:
Some items are not available according to vehicle specification.
SPECIAL FUNCTION
Special menu
W/L ON HISTORY
• Stores histories when warning/indicator lamp is turned on.
• “W/L ON HISTORY” indicates the “TIME” when the warning/ indicator lamp is turned on.
• The “TIME” above is:
- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine
and waiting for 30 seconds.
- 1 - 39: The number of times the engine was restarted after the 0 condition.
- NO W/L ON HISTORY: Stores NO (0) turning on history of warning/indicator lamp.
NOTE:
• W/L ON HISTORY is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets
low.
Display Item
LCD
Displays the value of Intelligent Key system message indication.
SHIFT IND
[P, R, N, D, L]
Displays shift selector position.
FUEL CAP W/L
[Off]
Displays [ON/OFF] condition of loose fuel cap warning message.
AIR PRES W/L
[ON/OFF]
Displays [ON/OFF] condition of tire pressure warning lamp.
PKB SW
[ON/OFF]
Status of parking brake switch.
BUCKLE SW
[ON/OFF]
Status of seat belt buckle switch (LH).
PASS BUCKLE SW
[ON/OFF]
Status of passenger seat belt buckle switch (RH).
BRAKE OIL SW
[ON/OFF]
Status of brake fluid level switch.
DISTANCE
[km] or [Mi]
Displays distance to empty.
BUZZER
[ON/OFF]
X
Displays [ON/OFF] condition of buzzer.
SLIP IND
[ON/OFF]
Displays [ON/OFF] condition of SLIP indicator lamp.
VDC/TCS IND
[ON/OFF]
Displays [ON/OFF] condition of VDC OFF indicator lamp.
Display item [Unit]
MAIN
SIGNALS
Description
Display item
Description
W/L ON HISTORY
Lighting history of warning lamp and indicator lamp can be checked.
Display item
Description
ABS W/L
Lighting history of ABS warning lamp.
VDC/TCS IND
Lighting history of VDC warning lamp.
SLIP IND
Lighting history of SLIP warning lamp.
BRAKE W/L
Lighting history of brake warning lamp.
OIL W/L
Lighting history of oil pressure warning lamp.
WCS
DIAGNOSIS SYSTEM (COMBINATION METER)
WCS-17
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
C-ENG W/L
Lighting history of malfunction indicator lamp (MIL).
AIR PRES W/L
Lighting history of tire pressure warning lamp.
EPS W/L
Lighting history of EPS warning lamp.
CHAGE W/L
Lighting history of charging warning lamp.
DOOR W/L
Lighting history of door warning lamp.
CRUISE W/L
Lighting history of cruise warning lamp.
O/D OFF IND
Lighting history of O/D OFF indicator lamp.
FUEL W/L
Lighting history of fuel warning lamp.
WASHER W/L
Lighting history of washer warning lamp.
Display item
Description
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст