Nissan Versa Sedan. Manual — part 519
FRONT DOOR FINISHER
INT-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
REMOVAL AND INSTALLATION
FRONT DOOR FINISHER
Exploded View
INFOID:0000000009269466
NOTE:
LH side shown; RH side similar.
Removal and Installation
INFOID:0000000009269467
REMOVAL
1. Fully open front door window.
2. Remove front door corner finisher. Refer to
MIR-17, "FRONT DOOR CORNER FINISHER : Removal and
.
3. Remove power window and door lock/unlock switch and finisher as an assembly (if equipped). Refer to
PWC-52, "Removal and Installation"
(LH) or
PWC-53, "Removal and Installation"
(RH).
1.
Front door panel
2.
Front door finisher
3.
Main power window and door lock/
unlock switch finisher (if equipped)
4.
Front door corner finisher
5.
Grommet
Metal clip
Clip
Pawl
AWJIA0721ZZ
INT-16
< REMOVAL AND INSTALLATION >
FRONT DOOR FINISHER
4. Remove front door finisher.
a. Remove front door finisher bolt (A).
b. Release front door finisher clips and metal clips using a suitable
tool (A) and remove front door finisher as shown.
: Clip
: Metal clip
CAUTION:
Apply protective tape (B) on the door panel and/or door fin-
isher to protect from damage.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing front door finisher, make sure the clips and metal clips are securely pressed into door
panel holes.
JMJIA6023ZZ
AWJIA0722ZZ
REAR DOOR FINISHER
INT-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
REAR DOOR FINISHER
Exploded View
INFOID:0000000009269468
Removal and Installation
INFOID:0000000009269469
REMOVAL
1. Fully open rear door window.
1.
Rear door panel
2.
Rear door finisher
3.
Rear power window switch finisher (if
equipped)
4.
Grommet
Clip
Metal clip
Pawl
AWJIA0724ZZ
INT-18
< REMOVAL AND INSTALLATION >
REAR DOOR FINISHER
2. Remove rear door finisher clip (A).
3. Remove rear power window switch and finisher as an assembly (if equipped). Refer to
4. Remove rear door finisher.
a. Remove rear door finisher bolt (A).
b. Release rear door finisher clips and metal clips using a suitable
tool (A) and remove rear door finisher as shown.
: Clip
: Metal clip
CAUTION:
Apply protective tape (B) on the door panel and/or door fin-
isher to protect from damage.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing rear door finisher, make sure the clips and metal clips are securely pressed into door
panel holes.
JMJIA6027ZZ
JMJIA6028ZZ
AWJIA0725ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст