Nissan Versa Sedan. Manual — part 434
EXT-22
< REMOVAL AND INSTALLATION >
REAR BUMPER
• Fitting adjustment cannot be performed.
JMKIA8023ZZ
Portion
Clearance
Surface height difference
Rear bumper – Rear fender
A – A
0.0 – 1.0 mm
(0.000 – 0.04 in)
(
−1.7) – (+0.3) mm
[(
−0.07) – (+0.01) in]
Rear bumper – Rear combi-
nation lamp
B – B
0.0 – 3.5 mm
(0.000 – 0.14) in
0.1 – 3.9 mm
(0.004 – 0.15 in)
Rear bumper – Trunk lid
C – C
5.0 – 9.0 mm
(0.20 – 0.35 in)
—
FRONT GRILLE
EXT-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
FRONT GRILLE
Exploded View
INFOID:0000000009268556
Removal and Installation
INFOID:0000000009268557
REMOVAL
1. Remove front bumper fascia. Refer to
EXT-16, "Removal and Installation"
.
2. Remove front grille nuts (A).
3. Pull front grille out away from vehicle to disengage pawls and
then remove front grille.
: Pawl
4. Remove front emblem from front grille (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
1.
Front grille
2.
Front emblem
Pawl
AWKIA1860ZZ
AWKIA1861ZZ
EXT-24
< REMOVAL AND INSTALLATION >
COWL TOP
COWL TOP
Exploded View
INFOID:0000000009268558
Removal and Installation
INFOID:0000000009268559
REMOVAL
1. Remove front wiper arms (LH/RH). Refer to
WW-44, "WIPER ARM : Removal and Installation"
2. Remove front fender covers (LH/RH). Refer to
DLK-282, "FENDER COVER : Removal and Installation"
3. Remove cowl top cover clips.
4. Pull forward to release cowl top cover from windshield glass.
CAUTION:
When performing the procedure after removing cowl top
cover, protect the lower of windshield glass with urethane,
etc.
1.
Cowl top cover seal
2.
Cowl top cover
3.
Air intake cover
4.
Cowl cover one-way valve
5.
Washer nozzle
6.
EPT sealer [3.0 mm (0.118 in)]
7.
EPT sealer [3.0 mm (0.118 in)]
Clip
Pawl
Front
JMKIA8046ZZ
JMKIA8047ZZ
COWL TOP
EXT-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
5. Disconnect the washer tube connector.
6. Remove cowl top cover.
7. Remove the following parts after removing cowl top cover.
• EPT sealer
• Cowl top cover seal
• Washer tube
• Washer nozzles (LH/RH). Refer to
WW-52, "WASHER NOZZLE : Removal and Installation"
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Always replace cowl top cover EPT sealer on rear of vehicle with a new one when installing old cowl
top cover.
• After installing wiper arms, perform adjustment. Refer to
WW-45, "WIPER ARM : Adjustment"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст