Nissan Versa Sedan. Manual — part 675
SE-26
< UNIT DISASSEMBLY AND ASSEMBLY >
FRONT SEAT
UNIT DISASSEMBLY AND ASSEMBLY
FRONT SEAT
DRIVER SIDE
DRIVER SIDE : Exploded View
INFOID:0000000009268530
WITH REMOVABLE HEADREST
ALJIA0995ZZ
FRONT SEAT
SE-27
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
1.
Armrest (if equipped)
2.
Seat cushion outer finisher (RH)
3.
Seat belt buckle
4.
Seat cushion trim
5.
Seat cushion pad
6.
Seat cushion frame
7.
Seat cushion outer finisher (LH)
8.
Lift lever (if equipped)
9.
Lift lever cap (if equipped)
10. Recline lever
11. Side air bag module
12. Chute rod
13. Headrest holder (locked)
14. Seat frame assembly
15. Headrest holder (free)
16. Headrest
17. Seatback pad
18. Seatback trim
SE-28
< UNIT DISASSEMBLY AND ASSEMBLY >
FRONT SEAT
WITHOUT REMOVABLE HEADREST
ALJIA0996ZZ
1.
Seat frame assembly
2.
Seat cushion outer finisher (RH)
3.
Seat belt buckle
4.
Seat cushion trim
5.
Seat cushion pad
6.
Seat cushion frame
7.
Seat cushion outer finisher (LH)
8.
Lift lever (if equipped)
9.
Lift lever cap (if equipped)
10. Recline lever
11. Side air bag module
12. Chute rod
13. Seatback pad
14. Seatback trim
FRONT SEAT
SE-29
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
DRIVER SIDE : Disassembly and Assembly
INFOID:0000000009268531
SEATBACK ASSEMBLY
WARNING:
Do not leave any objects (screwdrivers, tools, etc.) on the seat during seatback repair. It can lead to
personal injury if the side air bag should accidentally deploy.
CAUTION:
• Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least three
minutes.
• Handle the side air bag module carefully. During disassembly, always hold the side air bag module,
do not let it hang by the wire harness.
• Always work from the side or back of the seatback assembly, do not work in front of seat.
• Do not use air tools or electric tools for servicing the seat assembly.
• Replace the side air bag module if it has been dropped or sustained an impact.
• Do not insert any objects into the side air bag module.
• Do not attempt to disassemble the side air bag module.
• Do not expose the side air bag module to temperatures exceeding 93
°C (200°F).
• Do not expose the side air bag module to any oil, grease, detergent or water.
• During disassembly, do not damage the seatback board, chutes, connectors, retainers, clips, module
harness or the side air bag module.
NOTE:
If the vehicle has been involved in a collision and the side air bag module has deployed, the front seatback
assembly must be replaced.
Disassembly
1. Remove the front seat assembly. Refer to
SE-17, "DRIVER SIDE : Removal and Installation"
2. Release the lower seatback trim retainer strap (A) from the seat
cushion frame.
3. Remove the armrest (1) (if equipped).
a. Unzip the armrest to access the armrest bolt (A).
b. Remove the armrest bolt (A) and the armrest (1).
JMJIA6015ZZ
ALJIA0994ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст