Nissan Almera Tino V10 (2001 year). Manual — part 181
Available Adjusting Shims
NLMT0081
INPUT SHAFT REAR BEARING ADJUSTING SHIM
NLMT0081S01
End play
0 - 0.06 mm (0 - 0.0024 in)
Thickness
mm (in)
Part number*
0.74 (0.0291)
32225-6J003
0.78 (0.0307)
32225-6J004
0.82 (0.0323)
32225-6J005
0.86 (0.0339)
32225-6J006
0.90 (0.0354)
32225-6J007
0.94 (0.0370)
32225-6J008
0.98 (0.0386)
32225-6J009
1.02 (0.0402)
32225-6J010
1.06 (0.0417)
32225-6J011
1.10 (0.0433)
32225-6J012
1.14 (0.0449)
32225-6J013
1.18 (0.0465)
32225-6J014
1.22 (0.0480)
32225-6J015
1.26 (0.0496)
32225-6J016
1.30 (0.0512)
32225-6J017
1.34 (0.0528)
32225-6J018
1.38 (0.0543)
32225-6J019
1.42 (0.0559)
32225-6J020
1.46 (0.0575)
32225-6J021
1.50 (0.0591)
32225-6J022
1.54 (0.0606)
32225-6J023
1.58 (0.0622)
32225-6J024
1.62 (0.0638)
32225-6J060
1.66 (0.0654)
32225-6J061
*: Always check with the parts department for the latest information.
SERVICE DATA AND SPECIFICATIONS (SDS)
RS5F70A
Available Adjusting Shims
MT-92
MAINSHAFT ADJUSTING SHIM
NLMT0081S02
SMT907D
Standard length “L”
151.35 - 151.45 mm (5.9586 - 5.9626 in)
Thickness
mm (in)
Part number*
0.48 (0.0189)
32238-6J000
0.56 (0.0220)
32238-6J001
0.64 (0.0252)
32238-6J002
0.72 (0.0283)
32238-6J003
0.80 (0.0315)
32238-6J004
0.88 (0.0346)
32238-6J005
*: Always check with the parts department for the latest information.
MAINSHAFT REAR BEARING ADJUSTING SHIM
NLMT0081S03
End play
0 - 0.06 mm (0 - 0.0024 in)
Thickness
mm (in)
Part number*
2.99 (0.1177)
32238-6J010
3.03 (0.1193)
32238-6J011
3.07 (0.1209)
32238-6J012
3.11 (0.1224)
32238-6J013
3.15 (0.1240)
32238-6J014
3.19 (0.1256)
32238-6J015
3.23 (0.1272)
32238-6J016
3.27 (0.1287)
32238-6J017
3.31 (0.1303)
32238-6J018
3.35 (0.1319)
32238-6J019
3.39 (0.1335)
32238-6J020
3.43 (0.1350)
32238-6J021
3.47 (0.1366)
32238-6J022
3.51 (0.1382)
32238-6J023
*: Always check with the parts department for the latest information.
SERVICE DATA AND SPECIFICATIONS (SDS)
RS5F70A
Available Adjusting Shims (Cont’d)
MT-93
Available Thrust Washer
NLMT0082
MAINSHAFT THRUST WASHER
NLMT0082S01
SMT843D
Standard length “M”
244.20 - 244.30 mm (9.6142 - 9.6181 in)
Thickness
mm (in)
Part number*
6.04 (0.2378)
32246-6J000
6.12 (0.2409)
32246-6J001
6.20 (0.2441)
32246-6J002
6.28 (0.2472)
32246-6J003
6.36 (0.2504)
32246-6J004
*: Always check with the parts department for the latest information.
Available Washers
NLMT0083
DIFFERENTIAL SIDE GEAR THRUST WASHER
NLMT0083S01
Clearance between side gear and differential case
0.1 - 0.2 mm (0.004 - 0.008 in)
Thickness mm (in)
Part number*
0.75 - 0.80 (0.0295 - 0.0315)
38424-D2111
0.80 - 0.85 (0.0315 - 0.0335)
38424-D2112
0.85 - 0.90 (0.0335 - 0.0354)
38424-D2113
0.90 - 0.95 (0.0354 - 0.0374)
38424-D2114
0.95 - 1.00 (0.0374 - 0.0394)
38424-D2115
*: Always check with the parts department for the latest information.
SERVICE DATA AND SPECIFICATIONS (SDS)
RS5F70A
Available Thrust Washer
MT-94
Available Shims — Differential Side Bearing
Preload and Adjusting Shim
=NLMT0084
BEARING PRELOAD
NLMT0084S01
Unit: mm (in)
Differential side bearing preload: T*
0.15 - 0.21 (0.0059 - 0.0083)
*: Install shims which are “deflection of differential case” + “T” in thickness.
DIFFERENTIAL SIDE BEARING ADJUSTING SHIMS
NLMT0084S02
Thickness mm (in)
Part number*
0.44 (0.0173)
38454-M8000
0.48 (0.0189)
38454-M8001
0.52 (0.0205)
38454-M8002
0.56 (0.0220)
38454-M8003
0.60 (0.0236)
38454-M8004
0.64 (0.0252)
38454-M8005
0.68 (0.0268)
38454-M8006
0.72 (0.0283)
38454-M8007
0.76 (0.0299)
38454-M8008
0.80 (0.0315)
38454-M8009
0.84 (0.0331)
38454-M8010
0.88 (0.0346)
38454-M8011
*: Always check with the parts department for the latest information.
SERVICE DATA AND SPECIFICATIONS (SDS)
RS5F70A
Available Shims — Differential Side Bearing Preload and Adjusting Shim
MT-95
General Specifications
NLMT0024
TRANSAXLE
NLMT0024S01
Applied model
YD22DDTi
Model code number
4U107
Transaxle model
RS5F50A
Number of speeds
5
Synchromesh type
Warner
Shift pattern
Gear ratio
1st
3.400
2nd
1.955
3rd
1.206
4th
0.829
5th
0.641
Reverse
3.428
Number of teeth
Input gear
1st
15
2nd
22
3rd
29
4th
47
5th
53
Rev.
14
Main gear
1st
51
2nd
32
3rd
35
4th
39
5th
34
Rev.
48
Reverse idler gear
29
Oil capacity
!
(US pt, Imp pt)
4.5 - 4.8 (9-1/2 - 10-1/8, 7-7/8 - 8-1/2)
Remarks
1st & 2nd double baulk ring type synchronizer
FINAL GEAR
NLMT0024S02
Engine
YD22DDTi
Transaxle model
RS5F50A
Final gear ratio
3.823
Number of teeth
Final gear/Pinion
65/17
Side gear/Pinion
14/10
SERVICE DATA AND SPECIFICATIONS (SDS)
RS5F50A
General Specifications
MT-96
Gear End Play
NLMT0025
Unit: mm (in)
Gear
End play
1st main gear
2nd main gear
3rd input gear
4th input gear
5th input gear
0.23 - 0.43 (0.0091 - 0.0169)
0.23 - 0.58 (0.0091 - 0.0228)
0.23 - 0.43 (0.0091 - 0.0169)
0.25 - 0.55 (0.0098 - 0.0217)
0.23 - 0.48 (0.0091 - 0.0189)
Clearance Between Baulk Ring and Gear
NLMT0026
3RD, 4TH & 5TH BAULK RING
NLMT0026S01
Unit: mm (in)
Gear
Standard
Wear limit
3rd, 4th & 5th
1.0 - 1.35 (0.0394 - 0.0531)
0.7 (0.028)
1ST AND 2ND DOUBLE BAULK RING
NLMT0026S02
Unit: mm (in)
SMT806B
Dimension
Standard
Wear limit
A
0.6 - 0.8 (0.024 - 0.031)
0.2 (0.008)
B
0.6 - 1.1 (0.024 - 0.043)
REVERSE BAULK RING
NLMT0026S03
SMT581B
Dimension
Wear limit
A
1.2 mm (0.047 in)
SERVICE DATA AND SPECIFICATIONS (SDS)
RS5F50A
Gear End Play
MT-97
Available Snap Rings
=NLMT0027
1ST & 2ND SYNCHRONIZER HUB (AT MAINSHAFT)
NLMT0027S01
Allowable clearance
0 - 0.1 mm (0 - 0.004 in)
Thickness mm (in)
Part number*
1.95 (0.0768)
2.00 (0.0787)
2.05 (0.0807)
2.10 (0.0827)
32269-03E03
32269-03E00
32269-03E01
32269-03E02
*: Always check with the Parts Department for the latest parts information.
3RD & 4TH SYNCHRONIZER HUB (AT INPUT SHAFT)
NLMT0027S02
Allowable clearance
0 - 0.1 mm (0 - 0.004 in)
Thickness mm (in)
Part number*
1.95 (0.0768)
2.00 (0.0787)
2.05 (0.0807)
2.10 (0.0827)
32269-03E03
32269-03E00
32269-03E01
32269-03E02
*: Always check with the Parts Department for the latest parts information.
5TH MAIN GEAR (AT MAINSHAFT)
NLMT0027S03
Allowable clearance
0 - 0.15 mm (0 - 0.0059 in)
Thickness mm (in)
Part number*
1.95 (0.0768)
2.05 (0.0807)
2.15 (0.0846)
2.25 (0.0886)
32348-05E00
32348-05E01
32348-05E02
32348-05E03
*: Always check with the Parts Department for the latest parts information.
Available Thrust Washer
NLMT0028
4TH INPUT GEAR (AT INPUT SHAFT)
NLMT0028S01
Allowable clearance
0 - 0.06 mm (0 - 0.0024 in)
Thickness mm (in)
Part number*
4.500 (0.1772)
4.525 (0.1781)
4.550 (0.1791)
4.575 (0.1801)
32278-03E01
32278-03E02
32278-03E03
32278-03E04
*: Always check with the Parts Department for the latest parts information.
DIFFERENTIAL SIDE GEAR THRUST WASHER
NLMT0028S02
Allowable clearance between side gear and differential case with washer
0.1 - 0.2 mm (0.004 - 0.008 in)
Thickness mm (in)
Part number*
0.75 - 0.80 (0.0295 - 0.0315)
0.80 - 0.85 (0.0315 - 0.0335)
0.85 - 0.90 (0.0335 - 0.0354)
0.90 - 0.95 (0.0354 - 0.0374)
38424-E3020
38424-E3021
38424-E3022
38424-E3023
*: Always check with the Parts Department for the latest parts information.
SERVICE DATA AND SPECIFICATIONS (SDS)
RS5F50A
Available Snap Rings
MT-98
Available Shims
=NLMT0029
— INPUT SHAFT END PLAY AND MAINSHAFT AND DIFFERENTIAL SIDE BEARING PRELOAD AND
ADJUSTING SHIM
BEARING PRELOAD AND END PLAY
NLMT0029S01
Unit: mm (in)
Mainshaft bearing preload
0.06 - 0.11 (0.0024 - 0.0043)
Input shaft end play
0 - 0.05 (0 - 0.0020)
Differential side bearing preload
0.40 - 0.45 (0.0157 - 0.0177)
TOTAL TURNING TORQUE (NEW BEARING)
NLMT0029S02
Unit: N·m (kg-cm, in-lb)
Total turning torque (new bearing)
8.8 - 21.6 (90 - 220, 78 - 191)
MAINSHAFT BEARING ADJUSTING SHIM
NLMT0029S03
Thickness mm (in)
Part number*
0.40 (0.0157)
0.44 (0.0173)
0.48 (0.0189)
0.52 (0.0205)
0.56 (0.0220)
0.60 (0.0236)
0.64 (0.0252)
0.68 (0.0268)
0.72 (0.0283)
0.76 (0.0299)
0.80 (0.0315)
1.20 (0.0472)
32139-03E11
32139-03E00
32139-03E01
32139-03E12
32139-03E02
32139-03E03
32139-03E04
32139-03E05
32139-03E06
32139-03E07
32139-03E08
32139-03E13
*: Always check with the Parts Department for the latest parts information.
TABLE FOR SELECTING MAINSHAFT BEARING ADJUSTING SHIM(S)
NLMT0029S04
Unit: mm (in)
Dimension “C”
Suitable shim(s)
0.30 - 0.34 (0.0118 - 0.0134)
0.34 - 0.38 (0.0134 - 0.0150)
0.38 - 0.42 (0.0150 - 0.0165)
0.42 - 0.46 (0.0165 - 0.0181)
0.46 - 0.50 (0.0181 - 0.0197)
0.50 - 0.54 (0.0197 - 0.0213)
0.54 - 0.58 (0.0213 - 0.0228)
0.58 - 0.62 (0.0228 - 0.0244)
0.62 - 0.66 (0.0244 - 0.0260)
0.66 - 0.70 (0.0260 - 0.0276)
0.70 - 0.74 (0.0276 - 0.0291)
0.74 - 0.78 (0.0291 - 0.0307)
0.78 - 0.82 (0.0307 - 0.0323)
0.82 - 0.86 (0.0323 - 0.0339)
0.86 - 0.90 (0.0339 - 0.0354)
0.90 - 0.94 (0.0354 - 0.0370)
0.94 - 0.98 (0.0370 - 0.0386)
0.98 - 1.02 (0.0386 - 0.0402)
1.02 - 1.06 (0.0402 - 0.0417)
1.06 - 1.10 (0.0417 - 0.0433)
1.10 - 1.14 (0.0433 - 0.0449)
1.14 - 1.18 (0.0449 - 0.0465)
1.18 - 1.22 (0.0465 - 0.0480)
1.22 - 1.26 (0.0480 - 0.0496)
1.26 - 1.30 (0.0496 - 0.0512)
1.30 - 1.34 (0.0512 - 0.0528)
1.34 - 1.38 (0.0528 - 0.0543)
1.38 - 1.42 (0.0543 - 0.0559)
1.42 - 1.46 (0.0559 - 0.0575)
1.46 - 1.50 (0.0575 - 0.0591)
0.40 (0.0157)
0.44 (0.0173)
0.48 (0.0189)
0.52 (0.0205)
0.56 (0.0220)
0.60 (0.0236)
0.64 (0.0252)
0.68 (0.0268)
0.72 (0.0283)
0.76 (0.0299)
0.80 (0.0315)
0.40 + 0.44 (0.0157 + 0.0173)
0.44 + 0.44 (0.0173 + 0.0173)
0.44 + 0.48 (0.0173 + 0.0189)
0.48 + 0.48 (0.0189 + 0.0189)
0.48 + 0.52 (0.0189 + 0.0205)
0.52 + 0.52 (0.0205 + 0.0205)
0.52 + 0.56 (0.0205 + 0.0220)
0.56 + 0.56 (0.0220 + 0.0220)
0.56 + 0.60 (0.0220 + 0.0236)
0.60 + 0.60 (0.0236 + 0.0236)
0.60 + 0.64 (0.0236 + 0.0252)
0.64 + 0.64 (0.0252 + 0.0252)
0.64 + 0.68 (0.0252 + 0.0268)
0.68 + 0.68 (0.0268 + 0.0268)
0.68 + 0.72 (0.0268 + 0.0283)
0.72 + 0.72 (0.0283 + 0.0283)
0.72 + 0.76 (0.0283 + 0.0299)
0.76 + 0.76 (0.0299 + 0.0299)
0.76 + 0.80 (0.0299 + 0.0315)
SERVICE DATA AND SPECIFICATIONS (SDS)
RS5F50A
Available Shims
MT-99
INPUT SHAFT BEARING ADJUSTING SHIM
NLMT0029S05
Thickness mm (in)
Part number*
0.40 (0.0157)
0.44 (0.0173)
0.48 (0.0189)
0.52 (0.0205)
0.56 (0.0220)
0.60 (0.0236)
0.64 (0.0252)
0.68 (0.0268)
0.72 (0.0283)
0.76 (0.0299)
0.80 (0.0315)
1.20 (0.0472)
32225-08E00
32225-08E01
32225-08E02
32225-08E03
32225-08E04
32225-08E05
32225-08E06
32225-08E07
32225-08E08
32225-08E09
32225-08E10
32225-08E11
*: Always check with the Parts Department for the latest parts information.
TABLE FOR SELECTING INPUT SHAFT BEARING ADJUSTING SHIM(S)
NLMT0029S06
Unit: mm (in)
Dial indicator indication
Suitable shim(s)
0.65 - 0.69 (0.0256 - 0.0272)
0.69 - 0.73 (0.0272 - 0.0287)
0.73 - 0.77 (0.0287 - 0.0303)
0.77 - 0.81 (0.0303 - 0.0319)
0.81 - 0.85 (0.0319 - 0.0335)
0.85 - 0.89 (0.0335 - 0.0350)
0.89 - 0.93 (0.0350 - 0.0366)
0.93 - 0.97 (0.0366 - 0.0382)
0.97 - 1.01 (0.0382 - 0.0398)
1.01 - 1.05 (0.0398 - 0.0413)
1.05 - 1.09 (0.0413 - 0.0429)
1.09 - 1.13 (0.0429 - 0.0445)
1.13 - 1.17 (0.0445 - 0.0461)
1.17 - 1.21 (0.0461 - 0.0476)
1.21 - 1.25 (0.0476 - 0.0492)
1.25 - 1.29 (0.0492 - 0.0508)
1.29 - 1.33 (0.0508 - 0.0524)
1.33 - 1.37 (0.0524 - 0.0539)
1.37 - 1.41 (0.0539 - 0.0555)
1.41 - 1.45 (0.0555 - 0.0571)
1.45 - 1.49 (0.0571 - 0.0587)
1.49 - 1.53 (0.0587 - 0.0602)
1.53 - 1.57 (0.0602 - 0.0618)
1.57 - 1.61 (0.0618 - 0.0634)
1.61 - 1.65 (0.0634 - 0.0650)
1.65 - 1.69 (0.0650 - 0.0665)
0.64 (0.0252)
0.68 (0.0268)
0.72 (0.0283)
0.76 (0.0299)
0.80 (0.0315)
0.40 + 0.44 (0.0157 + 0.0173)
0.44 + 0.44 (0.0173 + 0.0173)
0.44 + 0.48 (0.0173 + 0.0189)
0.48 + 0.48 (0.0189 + 0.0189)
0.48 + 0.52 (0.0189 + 0.0205)
0.52 + 0.52 (0.0205 + 0.0205)
0.52 + 0.56 (0.0205 + 0.0220)
0.56 + 0.56 (0.0220 + 0.0220)
0.56 + 0.60 (0.0220 + 0.0236)
0.60 + 0.60 (0.0236 + 0.0236)
0.60 + 0.64 (0.0236 + 0.0252)
0.64 + 0.64 (0.0252 + 0.0252)
0.64 + 0.68 (0.0252 + 0.0268)
0.68 + 0.68 (0.0268 + 0.0268)
0.68 + 0.72 (0.0268 + 0.0283)
0.72 + 0.72 (0.0283 + 0.0283)
0.72 + 0.76 (0.0283 + 0.0299)
0.76 + 0.76 (0.0299 + 0.0299)
0.76 + 0.80 (0.0299 + 0.0315)
0.80 + 0.80 (0.0315 + 0.0315)
0.44 + 1.20 (0.0173 + 0.0472)
DIFFERENTIAL SIDE BEARING ADJUSTING SHIM
NLMT0029S07
Thickness mm (in)
Part number*
0.40 (0.0157)
0.44 (0.0173)
0.48 (0.0189)
0.52 (0.0205)
0.56 (0.0220)
0.60 (0.0236)
0.64 (0.0252)
0.68 (0.0268)
0.72 (0.0283)
0.76 (0.0299)
0.80 (0.0315)
0.84 (0.0331)
0.88 (0.0346)
1.20 (0.0472)
38453-96E00
38453-96E01
38453-96E02
38453-96E03
38453-96E04
38453-96E05
38453-96E06
38453-96E07
38453-96E08
38453-96E09
38453-96E10
38453-96E11
38453-96E12
38453-96E13
*: Always check with the Parts Department for the latest parts information.
SERVICE DATA AND SPECIFICATIONS (SDS)
RS5F50A
Available Shims (Cont’d)
MT-100
TABLE FOR SELECTING DIFFERENTIAL SIDE BEARING ADJUSTING SHIM(S)
=NLMT0029S08
Unit: mm (in)
Dial indicator deflection
Suitable shim(s)
0.47 - 0.51 (0.0185 - 0.0201)
0.51 - 0.55 (0.0201 - 0.0217)
0.55 - 0.59 (0.0217 - 0.0232)
0.59 - 0.63 (0.0232 - 0.0248)
0.63 - 0.67 (0.0248 - 0.0264)
0.67 - 0.71 (0.0264 - 0.0280)
0.71 - 0.75 (0.0280 - 0.0295)
0.75 - 0.79 (0.0295 - 0.0311)
0.79 - 0.83 (0.0311 - 0.0327)
0.83 - 0.87 (0.0327 - 0.0343)
0.87 - 0.91 (0.0343 - 0.0358)
0.91 - 0.95 (0.0358 - 0.0374)
0.95 - 0.99 (0.0374 - 0.0390)
0.99 - 1.03 (0.0390 - 0.0406)
1.03 - 1.07 (0.0406 - 0.0421)
1.07 - 1.11 (0.0421 - 0.0437)
1.11 - 1.15 (0.0437 - 0.0453)
1.15 - 1.19 (0.0453 - 0.0469)
1.19 - 1.23 (0.0469 - 0.0484)
1.23 - 1.27 (0.0484 - 0.0500)
1.27 - 1.31 (0.0500 - 0.0516)
0.44 + 0.48 (0.0173 + 0.0189)
0.48 + 0.48 (0.0189 + 0.0189)
0.48 + 0.52 (0.0189 + 0.0205)
0.52 + 0.52 (0.0205 + 0.0205)
0.52 + 0.56 (0.0205 + 0.0220)
0.56 + 0.56 (0.0220 + 0.0220)
0.56 + 0.60 (0.0220 + 0.0236)
0.60 + 0.60 (0.0236 + 0.0236)
0.60 + 0.64 (0.0236 + 0.0252)
0.64 + 0.64 (0.0252 + 0.0252)
0.64 + 0.68 (0.0252 + 0.0268)
0.68 + 0.68 (0.0268 + 0.0268)
0.68 + 0.72 (0.0268 + 0.0283)
0.72 + 0.72 (0.0283 + 0.0283)
0.72 + 0.76 (0.0283 + 0.0299)
0.76 + 0.76 (0.0299 + 0.0299)
0.76 + 0.80 (0.0299 + 0.0315)
0.80 + 0.80 (0.0315 + 0.0315)
0.44 + 1.20 (0.0173 + 0.0472)
0.48 + 1.20 (0.0189 + 0.0472)
0.52 + 1.20 (0.0205 + 0.0472)
SERVICE DATA AND SPECIFICATIONS (SDS)
RS5F50A
Available Shims (Cont’d)
MT-101
SERVICE DATA AND SPECIFICATIONS (SDS)
Available Shims (Cont’d)
MT-102
RESTRAINT SYSTEM
CONTENTS
. . . . . . . . . . . . . . . . ...3
Precautions . . . . . . . . . . . . . . . . ..3
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
. . 3
PRECAUTION FOR SEAT BELT SERVICE
. . . . ..3
Front Seat Belt. . . . . . . . . . . . . . . .5
. . . . . . . . .5
Rear Seat Belt . . . . . . . . . . . . . . . .7
REMOVAL AND INSTALLATION (MODELS WITH
BUILT-IN SEAT BELT)
. . . . . . . . . . . ...7
REMOVAL AND INSTALLATION (MODELS WITH
ROOF SEAT BELT)
. . . . . . . . . . . . .10
REMOVAL AND INSTALLATION (MODELS WITH
2-POINTS CENTER SEAT BELT)
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
. . .16
Precautions . . . . . . . . . . . . . . . . 16
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
. ..16
WIRING DIAGRAMS AND TROUBLE DIAGNOSIS
. .16
Preparation . . . . . . . . . . . . . . . . 17
. . . . . . . . . ..17
. . . . . . . . 18
SRS Configuration . . . . . . . . . . . . . .18
Seat Belt Pre-tensioner with Load Limiter. . . . .19
Built-in Type Side Air Bag. . . . . . . . . . ..19
SRS Component Parts Location . . . . . . . ...20
Maintenance Items . . . . . . . . . . . . . 20
Diagnosis Sensor Unit . . . . . . . . . . . ...21
. . . . . . . ...21
Front Seat Belt Pre-tensioner. . . . . . . . . 22
. . . . . . . ...22
Side Air Bag (Satellite) Sensor. . . . . . . . ..23
. . . . . . . ...23
Driver Air Bag Module and Spiral Cable . . . . ...24
. . . . . . . ...24
. . . . . . . . . . . . . . . ...24
. . . . . . . . . . . . . . 26
Front Passenger Air Bag Module . . . . . . . ..27
. . . . . . . . . . . . . . . ...27
. . . . . . . . . . . . . . 28
Front Side Air Bag Module . . . . . . . . . . 28
. . . . . . . . . . . . . . . ...28
. . . . . . . . . . . . . . 29
Disposal of Air Bag Module and Seat Belt Pre-
tensioner . . . . . . . . . . . . . . . . . 30
. . . . . . . .31
DEPLOYMENT PROCEDURES FOR AIR BAG
MODULE (OUTSIDE OF VEHICLE)
. . . . . . ...32
DEPLOYMENT PROCEDURES FOR SEAT BELT
PRE-TENSIONER (OUTSIDE OF VEHICLE)
. . . ..34
DEPLOYMENT OF AIR BAG MODULE AND SEAT
BELT PRE-TENSIONER WHILE MOUNTED IN
VEHICLE
. . . . . . . . . . . . . . . . .35
DISPOSING OF AIR BAG MODULE AND SEAT
BELT PRE-TENSIONER
. . . . . . . . . . ...36
Trouble Diagnoses Introduction. . . . . . . . .37
. . . . . . . . . . ...37
. . . . . ...37
HOW TO CHANGE SELF-DIAGNOSIS MODE
. . . . . . . . . . . . ...38
HOW TO CHANGE SELF-DIAGNOSIS MODE
. . . . . . . . . . . 38
HOW TO ERASE SELF-DIAGNOSIS RESULTS
. . .38
How to Perform Trouble Diagnoses for Quick
and Accurate Repair . . . . . . . . . . . . ..40
. . . . . . ..40
. . . . . . . . . . . 40
. . . . . . . . . . . . . . ..41
Wiring Diagram - SRS -. . . . . . . . . . . .42
MODELS WITH FRONT SEAT BELT
PRE-TENSIONER B21, B27
. . . . . . . . . .43
MODELS WITH FRONT SEAT BELT
PRE-TENSIONER B52, B53
. . . . . . . . . .44
SRS Operation Check . . . . . . . . . . . ...45
. . . . . . . . ..45
Trouble Diagnoses with CONSULT-II. . . . ...46
. . . . . . . . ..46
. . . . . . . . ..49
DIAGNOSTIC PROCEDURE 4 (CONTINUED
FROM DIAGNOSTIC PROCEDURE 2)
. . . . . ..51
. . . . . . . . ..51
Trouble Diagnoses without CONSULT-II. . . ..55
. . . . . . . . ..55
. . . . . . . . ..60
DIAGNOSTIC PROCEDURE 8 (CONTINUED
FROM DIAGNOSTIC PROCEDURE 6)
. . . . . ..62
Does Not Turn Off . . . . . . . . . . . . . .63
. . . . . . . . ..63
Does Not Turn On . . . . . . . . . . . . . .65
. . . . . . . . 65
Collision Diagnosis . . . . . . . . . . . . . 66
. . . . . . . . . .66
. . . . . . . . . . . .68
CONTENTS
(Cont’d)
RS-2
Precautions
SUPPLEMENTAL RESTRAINT SYSTEM (SRS) “AIR BAG” AND “SEAT BELT
PRE-TENSIONER”
NLRS0001
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER” used along with
a seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of
collision. The SRS composition which is available to NISSAN MODEL V10 is as follows (The composition var-
ies according to the destination and optional equipment.):
+
For a frontal collision
The Supplemental Restraint System consists of driver’s air bag module (located in the center of the steer-
ing wheel), front passenger air bag module (located on the instrument panel on passenger side), front seat
belt pre-tensioners, a diagnosis sensor unit, warning lamp, wiring harness and spiral cable.
+
For a side collision
The Supplemental Restraint System consists of front side air bag module (located in the outer side of front
seat), side air bag (satellite) sensor, diagnosis sensor unit (one of components of air bags for a frontal
collision), wiring harness, warning lamp (one of components of air bags for a frontal collision).
WARNING:
+
To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance should be per-
formed by an authorized NISSAN dealer.
+
Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system.
+
Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. Spiral cable and wiring harnesses covered with yellow insulation tape either just
before the harness connectors or for the complete harness are related to the SRS.
PRECAUTION FOR SEAT BELT SERVICE
NLRS0002
CAUTION:
+
Before removing the seat belt pre-tensioner assembly, turn the ignition switch off, disconnect both
battery cables and wait at least 3 minutes.
+
Do not use electrical test equipment for seat belt pre-tensioner connector.
+
After replacing or reinstalling seat belt pre-tensioner assembly, or reconnecting seat belt pre-ten-
sioner connector, check the system function. Refer to “SRS Operation Check” for details. (RS-45)
+
Do not disassemble buckle or seat belt assembly.
+
Replace anchor bolts if they are deformed or worn out.
+
Never oil tongue and buckle.
+
If any component of seat belt assembly is questionable, do not repair. Replace the whole seat belt
assembly.
+
If webbing is cut, frayed, or damaged, replace seat belt assembly.
+
When replacing seat belt assembly, use a genuine seat belt assembly.
After A Collision
NLRS0002S01
WARNING:
Inspect all seat belt assemblies including retractors and attaching hardware after any collision.
NISSAN recommends that all seat belt assemblies in use during a collision be replaced unless the
collision was minor and the belts show no damage and continue to operate properly. Failure to do so
could result in serious personal injury in an accident. Seat belt assemblies not in use during a colli-
sion should also be replaced if either damage or improper operation is noted. Seat belt pre-tensioner
should be replaced even if the seat belts are not in use during a frontal collision in which the air bags
are deployed.
Replace any seat belt assembly if:
+
The seat belt was in use at the time of a collision (except for minor collisions and the belts, retractors and
buckles show no damage and continue to operate properly).
+
The seat belt was damaged in an accident. (i.e. torn webbing, bent retractor or guide, etc.)
+
The seat belt attaching point was damaged in an accident. Inspect the seat belt attaching area for dam-
age or distortion and repair as necessary before installing a new seat belt assembly.
+
Anchor bolts are deformed or worn out.
SEAT BELTS
Precautions
RS-3
NRS127
SEAT BELTS
Precautions (Cont’d)
RS-4
Front Seat Belt
REMOVAL AND INSTALLATION
=NLRS0056
1. Slide the seat all the way forward. Tilt the seatback toward the front and remove the rear floor boxes.
2. Remove adjuster cover.
3. Remove floor anchor bolt.
4. Remove shoulder anchor bolt.
5. Remove front and rear kicking plate, then remove center pillar upper and lower garnish. Refer to BT-28,
“SIDE AND FLOOR TRIM” for details.
6. Disconnect seat belt pre-tensioner connector.
7. Remove the screw securing seat belt pre-tensioner retractor, then remove seat belt and seat belt pre-ten-
sioner retractor.
8. Remove bolts securing seat belt adjuster, then remove seat belt adjuster.
NRS096
SEAT BELTS
Front Seat Belt
RS-5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст