Qashqai J11. Lan system — part 7
LAN
SYSTEM
LAN-113
< SYSTEM DESCRIPTION >
[CAN GATEWAY]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
SYSTEM DESCRIPTION
SYSTEM
System Description
INFOID:0000000010377240
SYSTEM DIAGRAM
SYSTEM DESCRIPTION
• The BCM has a CAN gateway function.
• The BCM communicates between two CAN communication circuits.
• The BCM selects and transmits only necessary information.
JSMIA1666GB
LAN-114
< SYSTEM DESCRIPTION >
[CAN GATEWAY]
DIAGNOSIS SYSTEM (CAN GATEWAY)
DIAGNOSIS SYSTEM (CAN GATEWAY)
CONSULT Function
INFOID:0000000010377241
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with CAN gateway.
ECU IDENTIFICATION
The CAN gateway part number is displayed.
SELF DIAGNOSTIC RESULT
• When “CRNT” is displayed on self-diagnosis result
- The system is presently malfunctioning.
• When “PAST” is displayed on self-diagnosis result
- System malfunction in the past is detected, but the system is presently normal.
Freeze Frame Data (FFD)
When DTC is detected, a vehicle state shown below is recorded and displayed on CONSULT.
DATA MONITOR
CONFIGURATION
CAUTION:
Follow the instructions listed below. Failure to do this may cause malfunctions to the BCM.:
• When replacing BCM you must perform “Read / Write Configuration” or “Manual Configuration” with
CONSULT.
• Complete the procedure of “Read / Write Configuration” or “Manual Configuration” in order.
• If you set incorrect “Read / Write Configuration” or “Manual Configuration”, incidents might occur.
• Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
• Never perform “Read / Write Configuration” or “Manual Configuration” except for new BCM.
Diagnosis mode
Function Description
Ecu Identification
The CAN gateway software number is displayed.
Self Diagnostic Result
Displays the diagnosis results of BCM CAN gateway function.
Data Monitor
Displays real-time input/output data of BCM CAN gateway function.
Configuration
• Read and save the vehicle specification.
• Write the vehicle specification when replacing of BCM.
Item name
Display item
Milage
(Kirometers)
Displays the total mileage when a DTC is detected.
Monitor item
Description
CAN GW MODE
(UNCONF/MALF/NORMAL)
Displays the status of BCM CAN gateway function.
IGN SIGNAL
(Off/On)
Displays the status of ignition switch.
Function
Description
Read / Write Configuration
Before Replace ECU
• Reads the vehicle configuration of current BCM.
• Saves the read vehicle configuration.
After Replace ECU
Writes the vehicle configuration with saved data.
Manual Configuration
Writes the vehicle configuration with manual selection.
LAN
CAN GATEWAY
LAN-115
< ECU DIAGNOSIS INFORMATION >
[CAN GATEWAY]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ECU DIAGNOSIS INFORMATION
CAN GATEWAY
Reference Value
INFOID:0000000010377242
VALUES ON THE DIAGNOSIS TOOL
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
DTC Index
INFOID:0000000010377243
Monitor item
Condition
Value/Status
CAN GW MODE
When the configuration of the BCM CAN gateway function is not writ-
ten
UNCONF
When the BCM CAN Gateway function is malfunction
MALF
When BCM CAN Gateway function is normal.
NORMAL
IGN SIGNAL
Ignition switch in OFF or ACC position
Off
Ignition switch in ON position
On
DTC
Reference
No DTC is detected.
Further testing may be required.
—
B2600-46: CONFIG ERROR
B2600-55: CONFIG ERROR
LAN-116
< BASIC INSPECTION >
[CAN GATEWAY]
CONFIGURATION (CAN GATEWAY)
BASIC INSPECTION
CONFIGURATION (CAN GATEWAY)
Work Procedure
INFOID:0000000010377244
1.
WRITING MODE SELECTION
CONSULT Configuration
Select “Re/programming, Configuration” of CAN gateway.
When writing saved data>>GO TO 2.
When writing manually>>GO TO 3.
2.
PERFORM “AFTER REPLACE ECU” OF “READ / WRITE CONFIGURATION”
CONSULT Configuration
Perform “After Replace ECU” of “Read / Write Configuration”.
>> GO TO 4.
3.
PERFORM “MANUAL CONFIGURATION”
CONSULT Configuration
1.
Select “Manual Configuration”.
2.
Touch “Next”.
3.
Touch “OK”.
4.
Check that the configuration has been successfully written and touch “End”.
>> GO TO 4.
4.
CHECK ALL ECU SELF-DIAGNOSIS RESULTS
1.
Erase all ECU self-diagnosis results using CONSULT.
2.
Turn the ignition switch OFF.
3.
Turn the ignition switch ON and wait for 2 seconds or more.
4.
Check that all ECU self-diagnosis results have no DTC (e.g. U1000 and U1001) of CAN communication.
>> WORK END
LAN
B2600-46 CONFIG ERROR
LAN-117
< DTC/CIRCUIT DIAGNOSIS >
[CAN GATEWAY]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
DTC/CIRCUIT DIAGNOSIS
B2600-46 CONFIG ERROR
DTC Description
INFOID:0000000010377245
DTC DETECTION LOGIC
POSSIBLE CAUSE
BCM
FAIL-SAFE
Transmission and reception of the signal between CAN communication circuit 1 and CAN communication cir-
cuit 2 are stopped
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT
1.
Turn ignition switch ON and wait at least 2 seconds or more.
2.
Select “Self Diagnostic Result” mode of “CAN GATEWAY” using CONSULT.
3.
Check DTC.
Is DTC B2600-46 detected?
YES
>> Proceed to
LAN-117, "Diagnosis Procedure"
NO-1
>> To check malfunction symptom before repair:
GI-44, "Intermittent Incident"
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010377246
1.
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
1.
Turn ignition switch ON.
2.
Erase DTC.
3.
Perform DTC confirmation procedure again. Refer to
4.
Check DTC.
Is DTC B2600-46 detected again?
YES
>> Replace BCM. Refer to
BCS-135, "Removal and Installation"
.
NO
>> INSPECTION END
DTC
Trouble diagnosis
(Trouble diagnosis contents)
Detecting condition
B2600-46
CONFIG ERROR
(Configuration error)
When errors are detected in the configuration data stored in the BCM (CAN
gateway function).
LAN-118
< DTC/CIRCUIT DIAGNOSIS >
[CAN GATEWAY]
B2600-55 CONFIG ERROR
B2600-55 CONFIG ERROR
DTC Description
INFOID:0000000010377247
DTC DETECTION LOGIC
POSSIBLE CAUSE
• Configuration is incomplete
• BCM
FAIL-SAFE
Transmission and reception of the signal between CAN communication circuit 1 and CAN communication cir-
cuit 2 are stopped
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT
1.
Turn ignition switch ON and wait at least 2 seconds or more.
2.
Select “Self Diagnostic Result” mode of “CAN GATEWAY” using CONSULT.
3.
Check DTC.
Is DTC B2600-55 detected?
YES
>> Proceed to
LAN-118, "Diagnosis Procedure"
NO-1
>> To check malfunction symptom before repair:
GI-44, "Intermittent Incident"
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010377248
1.
PERFORM CONFIGURATION OF CAN GATEWAY
Perform CAN gateway configuration. Refer to
.
>> GO TO 2.
2.
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
1.
Turn ignition switch ON.
2.
Perform DTC confirmation procedure again. Refer to
3.
Check DTC.
Is DTC B2600-55 detected again?
YES
>> Replace BCM. Refer to
BCS-135, "Removal and Installation"
.
NO
>> INSPECTION END
DTC
Trouble diagnosis
(Trouble diagnosis contents)
Detecting condition
B2600-55
CONFIG ERROR
(Configuration error)
When no data are stored in the BCM (CAN gateway function).
LAN
MALFUNCTION AREA CHART
LAN-119
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 101)]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
DTC/CIRCUIT DIAGNOSIS
MALFUNCTION AREA CHART
Main Line
INFOID:0000000010748746
Branch Line
INFOID:0000000010748747
Short Circuit
INFOID:0000000010748748
Malfunction area
Reference
Main line between ABS actuator and electric unit (control unit) and data link con-
nector
Main line between data link connector and chassis control module connector
Main line between chassis control module and 4WD control unit
—
Main line between A/C auto amp. and front camera unit connector (With auto-
matic air conditioner)
—
Main line between A/C amp. and front camera unit connector (Except automatic
air conditioner)
Malfunction area
Reference
ECM branch line circuit
ABS actuator and electric unit (control unit) branch line circuit
IPDM E/R branch line circuit
TCM branch line circuit
—
Data link connector branch line circuit
Electric park brake control unit branch line
EPS control unit branch line circuit
Steering lock unit branch line circuit
—
Combination meter branch line circuit
Steering angle sensor branch line circuit
Air bag diagnosis sensor unit branch line circuit
Chassis control module branch line circuit
Sonar control unit branch line circuit
—
4WD control unit branch line circuit
—
BCM branch line circuit
NAVI control unit branch line circuit
—
Around view monitor control unit branch line circuit
—
A/C auto amp. branch line circuit (With automatic air conditioner)
LAN-100, "Diagnosis Procedure"
A/C amp. branch line circuit (Except automatic air conditioner)
Front camera unit branch line circuit
—
Distance sensor branch line circuit (CAN communication circuit 2)
—
Distance sensor branch line circuit (Chassis communication circuit)
—
Malfunction area
Reference
CAN communication circuit 1
LAN-105, "Diagnosis Procedure"
CAN communication circuit 2
LAN-107, "Diagnosis Procedure"
Chassis communication circuit
—
LAN-120
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 102)]
MALFUNCTION AREA CHART
DTC/CIRCUIT DIAGNOSIS
MALFUNCTION AREA CHART
Main Line
INFOID:0000000010748749
Branch Line
INFOID:0000000010748750
Short Circuit
INFOID:0000000010748751
Malfunction area
Reference
Main line between ABS actuator and electric unit (control unit) and data link con-
nector
Main line between data link connector and chassis control module connector
Main line between chassis control module and 4WD control unit
—
Main line between A/C auto amp. and front camera unit connector (With auto-
matic air conditioner)
—
Main line between A/C amp. and front camera unit connector (Except automatic
air conditioner)
Malfunction area
Reference
ECM branch line circuit
ABS actuator and electric unit (control unit) branch line circuit
IPDM E/R branch line circuit
TCM branch line circuit
—
Data link connector branch line circuit
Electric park brake control unit branch line
EPS control unit branch line circuit
Steering lock unit branch line circuit
—
Combination meter branch line circuit
Steering angle sensor branch line circuit
Air bag diagnosis sensor unit branch line circuit
Chassis control module branch line circuit
Sonar control unit branch line circuit
—
4WD control unit branch line circuit
—
BCM branch line circuit
NAVI control unit branch line circuit
Around view monitor control unit branch line circuit
—
A/C auto amp. branch line circuit (With automatic air conditioner)
LAN-100, "Diagnosis Procedure"
A/C amp. branch line circuit (Except automatic air conditioner)
Front camera unit branch line circuit
—
Distance sensor branch line circuit (CAN communication circuit 2)
—
Distance sensor branch line circuit (Chassis communication circuit)
—
Malfunction area
Reference
CAN communication circuit 1
LAN-105, "Diagnosis Procedure"
CAN communication circuit 2
LAN-107, "Diagnosis Procedure"
Chassis communication circuit
—
LAN
MALFUNCTION AREA CHART
LAN-121
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 103)]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
DTC/CIRCUIT DIAGNOSIS
MALFUNCTION AREA CHART
Main Line
INFOID:0000000010748752
Branch Line
INFOID:0000000010748753
Short Circuit
INFOID:0000000010748754
Malfunction area
Reference
Main line between ABS actuator and electric unit (control unit) and data link con-
nector
Main line between data link connector and chassis control module connector
Main line between chassis control module and 4WD control unit
—
Main line between A/C auto amp. and front camera unit connector (With auto-
matic air conditioner)
—
Main line between A/C amp. and front camera unit connector (Except automatic
air conditioner)
Malfunction area
Reference
ECM branch line circuit
ABS actuator and electric unit (control unit) branch line circuit
IPDM E/R branch line circuit
TCM branch line circuit
—
Data link connector branch line circuit
Electric park brake control unit branch line
EPS control unit branch line circuit
Steering lock unit branch line circuit
—
Combination meter branch line circuit
Steering angle sensor branch line circuit
Air bag diagnosis sensor unit branch line circuit
Chassis control module branch line circuit
Sonar control unit branch line circuit
—
4WD control unit branch line circuit
—
BCM branch line circuit
NAVI control unit branch line circuit
Around view monitor control unit branch line circuit
A/C auto amp. branch line circuit (With automatic air conditioner)
LAN-100, "Diagnosis Procedure"
A/C amp. branch line circuit (Except automatic air conditioner)
Front camera unit branch line circuit
—
Distance sensor branch line circuit (CAN communication circuit 2)
—
Distance sensor branch line circuit (Chassis communication circuit)
—
Malfunction area
Reference
CAN communication circuit 1
LAN-105, "Diagnosis Procedure"
CAN communication circuit 2
LAN-107, "Diagnosis Procedure"
Chassis communication circuit
—
LAN-122
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 104)]
MALFUNCTION AREA CHART
DTC/CIRCUIT DIAGNOSIS
MALFUNCTION AREA CHART
Main Line
INFOID:0000000010748755
Branch Line
INFOID:0000000010748756
Short Circuit
INFOID:0000000010748757
Malfunction area
Reference
Main line between ABS actuator and electric unit (control unit) and data link con-
nector
Main line between data link connector and chassis control module connector
Main line between chassis control module and 4WD control unit
—
Main line between A/C auto amp. and front camera unit connector (With auto-
matic air conditioner)
—
Main line between A/C amp. and front camera unit connector (Except automatic
air conditioner)
Malfunction area
Reference
ECM branch line circuit
ABS actuator and electric unit (control unit) branch line circuit
IPDM E/R branch line circuit
TCM branch line circuit
—
Data link connector branch line circuit
Electric park brake control unit branch line
EPS control unit branch line circuit
Steering lock unit branch line circuit
—
Combination meter branch line circuit
Steering angle sensor branch line circuit
Air bag diagnosis sensor unit branch line circuit
Chassis control module branch line circuit
Sonar control unit branch line circuit
4WD control unit branch line circuit
—
BCM branch line circuit
NAVI control unit branch line circuit
—
Around view monitor control unit branch line circuit
—
A/C auto amp. branch line circuit (With automatic air conditioner)
LAN-100, "Diagnosis Procedure"
A/C amp. branch line circuit (Except automatic air conditioner)
Front camera unit branch line circuit
—
Distance sensor branch line circuit (CAN communication circuit 2)
—
Distance sensor branch line circuit (Chassis communication circuit)
—
Malfunction area
Reference
CAN communication circuit 1
LAN-105, "Diagnosis Procedure"
CAN communication circuit 2
LAN-107, "Diagnosis Procedure"
Chassis communication circuit
—
LAN
MALFUNCTION AREA CHART
LAN-123
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 105)]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
DTC/CIRCUIT DIAGNOSIS
MALFUNCTION AREA CHART
Main Line
INFOID:0000000010748797
Branch Line
INFOID:0000000010748798
Short Circuit
INFOID:0000000010748799
Malfunction area
Reference
Main line between ABS actuator and electric unit (control unit) and data link con-
nector
Main line between data link connector and chassis control module connector
Main line between chassis control module and 4WD control unit
—
Main line between A/C auto amp. and front camera unit connector (With auto-
matic air conditioner)
—
Main line between A/C amp. and front camera unit connector (Except automatic
air conditioner)
Malfunction area
Reference
ECM branch line circuit
ABS actuator and electric unit (control unit) branch line circuit
IPDM E/R branch line circuit
TCM branch line circuit
—
Data link connector branch line circuit
Electric park brake control unit branch line
EPS control unit branch line circuit
Steering lock unit branch line circuit
—
Combination meter branch line circuit
Steering angle sensor branch line circuit
Air bag diagnosis sensor unit branch line circuit
Chassis control module branch line circuit
Sonar control unit branch line circuit
4WD control unit branch line circuit
—
BCM branch line circuit
NAVI control unit branch line circuit
Around view monitor control unit branch line circuit
—
A/C auto amp. branch line circuit (With automatic air conditioner)
LAN-100, "Diagnosis Procedure"
A/C amp. branch line circuit (Except automatic air conditioner)
Front camera unit branch line circuit
—
Distance sensor branch line circuit (CAN communication circuit 2)
—
Distance sensor branch line circuit (Chassis communication circuit)
—
Malfunction area
Reference
CAN communication circuit 1
LAN-105, "Diagnosis Procedure"
CAN communication circuit 2
LAN-107, "Diagnosis Procedure"
Chassis communication circuit
—
LAN-124
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 106)]
MALFUNCTION AREA CHART
DTC/CIRCUIT DIAGNOSIS
MALFUNCTION AREA CHART
Main Line
INFOID:0000000010748800
Branch Line
INFOID:0000000010748801
Short Circuit
INFOID:0000000010748802
Malfunction area
Reference
Main line between ABS actuator and electric unit (control unit) and data link con-
nector
Main line between data link connector and chassis control module connector
Main line between chassis control module and 4WD control unit
—
Main line between A/C auto amp. and front camera unit connector (With auto-
matic air conditioner)
—
Main line between A/C amp. and front camera unit connector (Except automatic
air conditioner)
Malfunction area
Reference
ECM branch line circuit
ABS actuator and electric unit (control unit) branch line circuit
IPDM E/R branch line circuit
TCM branch line circuit
—
Data link connector branch line circuit
Electric park brake control unit branch line
EPS control unit branch line circuit
Steering lock unit branch line circuit
—
Combination meter branch line circuit
Steering angle sensor branch line circuit
Air bag diagnosis sensor unit branch line circuit
Chassis control module branch line circuit
Sonar control unit branch line circuit
4WD control unit branch line circuit
—
BCM branch line circuit
NAVI control unit branch line circuit
Around view monitor control unit branch line circuit
A/C auto amp. branch line circuit (With automatic air conditioner)
LAN-100, "Diagnosis Procedure"
A/C amp. branch line circuit (Except automatic air conditioner)
Front camera unit branch line circuit
—
Distance sensor branch line circuit (CAN communication circuit 2)
—
Distance sensor branch line circuit (Chassis communication circuit)
—
Malfunction area
Reference
CAN communication circuit 1
LAN-105, "Diagnosis Procedure"
CAN communication circuit 2
LAN-107, "Diagnosis Procedure"
Chassis communication circuit
—
LAN
MALFUNCTION AREA CHART
LAN-125
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 107)]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
DTC/CIRCUIT DIAGNOSIS
MALFUNCTION AREA CHART
Main Line
INFOID:0000000010748803
Branch Line
INFOID:0000000010748804
Short Circuit
INFOID:0000000010748805
Malfunction area
Reference
Main line between ABS actuator and electric unit (control unit) and data link con-
nector
Main line between data link connector and chassis control module connector
Main line between chassis control module and 4WD control unit
—
Main line between A/C auto amp. and front camera unit connector (With auto-
matic air conditioner)
—
Main line between A/C amp. and front camera unit connector (Except automatic
air conditioner)
Malfunction area
Reference
ECM branch line circuit
ABS actuator and electric unit (control unit) branch line circuit
IPDM E/R branch line circuit
TCM branch line circuit
Data link connector branch line circuit
Electric park brake control unit branch line
EPS control unit branch line circuit
Steering lock unit branch line circuit
—
Combination meter branch line circuit
Steering angle sensor branch line circuit
Air bag diagnosis sensor unit branch line circuit
Chassis control module branch line circuit
Sonar control unit branch line circuit
—
4WD control unit branch line circuit
—
BCM branch line circuit
NAVI control unit branch line circuit
—
Around view monitor control unit branch line circuit
—
A/C auto amp. branch line circuit (With automatic air conditioner)
LAN-100, "Diagnosis Procedure"
A/C amp. branch line circuit (Except automatic air conditioner)
Front camera unit branch line circuit
—
Distance sensor branch line circuit (CAN communication circuit 2)
—
Distance sensor branch line circuit (Chassis communication circuit)
—
Malfunction area
Reference
CAN communication circuit 1
LAN-105, "Diagnosis Procedure"
CAN communication circuit 2
LAN-107, "Diagnosis Procedure"
Chassis communication circuit
—
LAN-126
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 108)]
MALFUNCTION AREA CHART
DTC/CIRCUIT DIAGNOSIS
MALFUNCTION AREA CHART
Main Line
INFOID:0000000010748806
Branch Line
INFOID:0000000010748807
Short Circuit
INFOID:0000000010748808
Malfunction area
Reference
Main line between ABS actuator and electric unit (control unit) and data link con-
nector
Main line between data link connector and chassis control module connector
Main line between chassis control module and 4WD control unit
—
Main line between A/C auto amp. and front camera unit connector (With auto-
matic air conditioner)
—
Main line between A/C amp. and front camera unit connector (Except automatic
air conditioner)
Malfunction area
Reference
ECM branch line circuit
ABS actuator and electric unit (control unit) branch line circuit
IPDM E/R branch line circuit
TCM branch line circuit
Data link connector branch line circuit
Electric park brake control unit branch line
EPS control unit branch line circuit
Steering lock unit branch line circuit
—
Combination meter branch line circuit
Steering angle sensor branch line circuit
Air bag diagnosis sensor unit branch line circuit
Chassis control module branch line circuit
Sonar control unit branch line circuit
—
4WD control unit branch line circuit
—
BCM branch line circuit
NAVI control unit branch line circuit
Around view monitor control unit branch line circuit
—
A/C auto amp. branch line circuit (With automatic air conditioner)
LAN-100, "Diagnosis Procedure"
A/C amp. branch line circuit (Except automatic air conditioner)
Front camera unit branch line circuit
—
Distance sensor branch line circuit (CAN communication circuit 2)
—
Distance sensor branch line circuit (Chassis communication circuit)
—
Malfunction area
Reference
CAN communication circuit 1
LAN-105, "Diagnosis Procedure"
CAN communication circuit 2
LAN-107, "Diagnosis Procedure"
Chassis communication circuit
—
LAN
MALFUNCTION AREA CHART
LAN-127
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 109)]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
DTC/CIRCUIT DIAGNOSIS
MALFUNCTION AREA CHART
Main Line
INFOID:0000000010748809
Branch Line
INFOID:0000000010748810
Short Circuit
INFOID:0000000010748811
Malfunction area
Reference
Main line between ABS actuator and electric unit (control unit) and data link con-
nector
Main line between data link connector and chassis control module connector
Main line between chassis control module and 4WD control unit
—
Main line between A/C auto amp. and front camera unit connector (With auto-
matic air conditioner)
—
Main line between A/C amp. and front camera unit connector (Except automatic
air conditioner)
Malfunction area
Reference
ECM branch line circuit
ABS actuator and electric unit (control unit) branch line circuit
IPDM E/R branch line circuit
TCM branch line circuit
Data link connector branch line circuit
Electric park brake control unit branch line
EPS control unit branch line circuit
Steering lock unit branch line circuit
—
Combination meter branch line circuit
Steering angle sensor branch line circuit
Air bag diagnosis sensor unit branch line circuit
Chassis control module branch line circuit
Sonar control unit branch line circuit
—
4WD control unit branch line circuit
—
BCM branch line circuit
NAVI control unit branch line circuit
Around view monitor control unit branch line circuit
A/C auto amp. branch line circuit (With automatic air conditioner)
LAN-100, "Diagnosis Procedure"
A/C amp. branch line circuit (Except automatic air conditioner)
Front camera unit branch line circuit
—
Distance sensor branch line circuit (CAN communication circuit 2)
—
Distance sensor branch line circuit (Chassis communication circuit)
—
Malfunction area
Reference
CAN communication circuit 1
LAN-105, "Diagnosis Procedure"
CAN communication circuit 2
LAN-107, "Diagnosis Procedure"
Chassis communication circuit
—
LAN-128
< DTC/CIRCUIT DIAGNOSIS >
[CAN SYSTEM (TYPE 110)]
MALFUNCTION AREA CHART
DTC/CIRCUIT DIAGNOSIS
MALFUNCTION AREA CHART
Main Line
INFOID:0000000010748812
Branch Line
INFOID:0000000010748813
Short Circuit
INFOID:0000000010748814
Malfunction area
Reference
Main line between ABS actuator and electric unit (control unit) and data link con-
nector
Main line between data link connector and chassis control module connector
Main line between chassis control module and 4WD control unit
—
Main line between A/C auto amp. and front camera unit connector (With auto-
matic air conditioner)
—
Main line between A/C amp. and front camera unit connector (Except automatic
air conditioner)
Malfunction area
Reference
ECM branch line circuit
ABS actuator and electric unit (control unit) branch line circuit
IPDM E/R branch line circuit
TCM branch line circuit
Data link connector branch line circuit
Electric park brake control unit branch line
EPS control unit branch line circuit
Steering lock unit branch line circuit
—
Combination meter branch line circuit
Steering angle sensor branch line circuit
Air bag diagnosis sensor unit branch line circuit
Chassis control module branch line circuit
Sonar control unit branch line circuit
4WD control unit branch line circuit
—
BCM branch line circuit
NAVI control unit branch line circuit
—
Around view monitor control unit branch line circuit
—
A/C auto amp. branch line circuit (With automatic air conditioner)
LAN-100, "Diagnosis Procedure"
A/C amp. branch line circuit (Except automatic air conditioner)
Front camera unit branch line circuit
—
Distance sensor branch line circuit (CAN communication circuit 2)
—
Distance sensor branch line circuit (Chassis communication circuit)
—
Malfunction area
Reference
CAN communication circuit 1
LAN-105, "Diagnosis Procedure"
CAN communication circuit 2
LAN-107, "Diagnosis Procedure"
Chassis communication circuit
—
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст