Nissan Primera P11. Manual — part 332
Wiring Diagram — WIP/R —
YEL883C
REAR WIPER AND WASHER
EL-195
YEL178C
Preceding page
: 4 door models
: 5 door hatch-back models
: Wagon models
: 5 door hatchback models
and Wagon models
STOP
MOVE
REAR WIPER
MOTOR
STOP
MOVE
REAR WIPER
MOTOR
REAR WIPER AND WASHER
Wiring Diagram — WIP/R — (Cont’d)
EL-196
Removal and Installation
WIPER ARM
1. Prior to wiper arm installation, turn on wiper switch to oper-
ate wiper motor and then turn it off (Auto Stop).
2. Lift the blade up and then set it down onto glass surface. Set
the blade center before tightening nut.
3. Eject washer fluid. Turn on wiper switch to operate wiper
motor and then turn it off.
4. Ensure that wiper blade stops in the correct position.
●
Tighten windshield wiper arm nut to specified torque.
: 13 - 18 N·m (1.4 - 1.8 kg-m, 10 - 13 ft-lb)
●
Before reinstalling wiper arm, clean up the pivot area as
illustrated. This will reduce possibility of wiper arm
looseness.
Washer Nozzle Adjustment
●
Adjust washer nozzle with suitable tool as shown in the fig-
ure at left.
Adjustable range: ±10° (In any direction)
Wagon
60 (2.4)
170.3 (6.7)
Unit: mm (in)
Sedan
Molding
edge
Hatchback
Back
door
side
66 (2.6)
YEL456B
SEL024J
NEL314
Suitable tool
Max. 10°
Nozzle hole bore diameter
1.0 mm (0.039 in)
REAR WIPER AND WASHER
EL-197
Unit: mm (in)
*1
150 (5.91)
*3
135 (5.31)
*2
290 (11.42)
*4
170 (6.69)
Circle diameters are approx. 80 mm (3.15 in)
NEL315
Black printed edge
All these diameters of these circles
are less than 80 (3.15)
*3
*4
*1
*2
Unit: mm (in)
REAR WIPER AND WASHER
Washer Nozzle Adjustment (Cont’d)
EL-198
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст