Nissan Primera P11. Manual — part 349
DIAGNOSTIC PROCEDURE 5
(Key switch check)
CHECK IGNITION KEY SWITCH
INPUT SIGNAL.
Check voltage between control unit ter-
minal
쑗
22
and ground.
NG
왘
OK
Key switch is OK.
CHECK KEY SWITCH POWER SUP-
PLY.
Check voltage between key switch har-
ness terminal
쑗
2
and ground.
Battery voltage should exist.
OK
왘
NG
Check the following.
●
10A fuse [No. 16 ,
located in fuse block
(J/B)]
●
Harness for open or
short between key
switch and fuse
CHECK KEY SWITCH.
1) Disconnect key switch connector.
2) Check continuity between key
switch terminals.
OK
왘
NG
Replace key switch.
Check harness for open or short
between control unit and key switch.
Condition of key switch
Voltage [V]
Key is inserted
Approx. 12
Key withdrawn
0
Terminals
Condition
Continuity
쑗
1
-
쑗
2
Key is
inserted.
Yes
Key is with-
drawn.
No
YEL034D
YEL826
Key switch connector
YEL827
Key switch connector
왔
왔
왔
POWER DOOR LOCK
Trouble Diagnoses (Cont’d)
EL-263
NOTE
POWER DOOR LOCK
EL-264
Component Parts Location
NEL562
Door key cylinder switch
Lock knob
Time control unit
Door lock actuator assembly
Door lock switch
Time control unit
B11 , B12 ,
B96
Door key
cylinder switch
connector
D9
,
D17
Door lock actuator
assembly
D7
,
D16
Door switch
Fuse block (J/B)
POWER DOOR LOCK — Super Lock —
EL-265
System Description/Super Lock for RHD
Models
OUTLINE
Power door lock system with super lock and key reminder is controlled by time control unit. Super lock has
a higher anti-theft performance than conventional power door lock systems.
When super lock is in released condition, lock knob operation locks or unlocks door.
When super lock is in set condition; lock knob operation cannot lock nor unlock door.
OPERATION
Power door lock/unlock and super lock set/release operation by door key cylinder
●
With the key inserted into front door key cylinder, turning it to LOCK will lock all doors and set super
lock while all doors are closed or any door is open. (Super lock will not be set while key is inserted in
the ignition key cylinder.)
●
With the key inserted into front door key cylinder, turning it to UNLOCK will unlock all doors and release
super lock.
Power door lock/unlock and super lock set/release operation by multi-remote controller (if equipped)
●
Pressing multi-remote controller LOCK button will lock all doors and set super lock while all doors are
closed and key is not inserted in the ignition key cylinder.
●
Pressing once will release super lock and unlock driver’s door.
●
Pressing twice will release super lock and unlock all doors.
Power door lock and super lock release operation (by NATS IMMU signal)
●
When the super lock is set, turning ignition key switch to ON will release super lock and unlock all doors.
SEL831U
With super lock released
With super lock set
Door key cylinder
UNLOCK
LOCK
Door lock knob
Door knob rod
Lever B
Lever B
Door lock actuator assembly
Lever A
With super lock set, the connecting
rod is disengaged from lever B.
This enables the linkage to convey
operational force from lever B to lever A.
The door lock knob can still be operated
but this operation does not lock nor
unlock door.
Lever A
Connecting rod
LOCK
UNLOCK
Door lock actuator assembly
POWER DOOR LOCK — Super Lock —
EL-266
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст