Nissan Note E12. Manual — part 312
EXL-116
< REMOVAL AND INSTALLATION >
REAR COMBINATION LAMP
2. Rotate stop/tail lamp bulb socket counterclockwise and remove.
3. Remove stop/tail lamp bulb from bulb socket.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing the bulb, install bulb socket securely for watertightness.
REAR TURN SIGNAL LAMP BULB
Removal
1. Remove rear combination lamp. Refer to
EXL-115, "Removal and Installation"
2. Rotate rear turn signal lamp bulb socket counterclockwise and remove.
3. Remove rear turn signal lamp bulb from bulb socket.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing the bulb, install bulb socket securely for watertightness.
BACK-UP LAMP BULB
Removal
1. Remove rear combination lamp. Refer to
EXL-115, "Removal and Installation"
2. Rotate back-up lamp bulb socket counterclockwise and remove.
3. Remove back-up lamp bulb from bulb socket.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing the bulb, install bulb socket securely for watertightness.
HIGH-MOUNTED STOP LAMP
EXL-117
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HIGH-MOUNTED STOP LAMP
Exploded View
INFOID:0000000009015747
Removal and Installation
INFOID:0000000009015748
REMOVAL
1. Release high-mounted stop lamp pawls using a suitable tool.
2. Disconnect the harness connector from high-mounted stop lamp and remove.
INSTALLATION
Installation is in the reverse order of removal.
Bulb Replacement
INFOID:0000000009015749
HIGH-MOUNTED STOP LAMP BULB
The high-mounted stop lamp bulb is a LED and is integrated into the high-mounted stop lamp and is serviced
as an assembly. Refer to
EXL-117, "Removal and Installation"
1.
High-mounted stop lamp
2.
High-mounted stop lamp LED
Pawl
AWLIA2164ZZ
EXL-118
< REMOVAL AND INSTALLATION >
LICENSE PLATE LAMP
LICENSE PLATE LAMP
Exploded View
INFOID:0000000009015750
Removal and Installation
INFOID:0000000009015751
REMOVAL
1. Remove back door outer finisher. Refer to
EXT-34, "Removal and Installation"
2. Disconnect harness connector from license plate lamp.
3. Release license plate lamp pawl and remove license plate lamp.
INSTALLATION
Installation is in the reverse order of removal.
Bulb Replacement
INFOID:0000000009015752
WARNING:
Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.
CAUTION:
• Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to pre-
vent damage to the bulb.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
REMOVAL
1. Remove license plate lamp. Refer to
EXL-118, "Removal and Installation"
2. Rotate license plate lamp bulb socket counterclockwise and remove.
3. Remove license plate lamp bulb from bulb socket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installing the bulb, install the bulb socket securely for watertightness.
1.
License plate lamp bulb socket
2.
License plate lamp bulb
3.
Seal
4.
License plate lamp
Pawl
AWLIA2173ZZ
FRONT COMBINATION LAMP
EXL-119
< UNIT DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
UNIT DISASSEMBLY AND ASSEMBLY
FRONT COMBINATION LAMP
Exploded View
INFOID:0000000009670495
FRONT COMBINATION LAMP - WITHOUT AIMING MOTOR
FRONT COMBINATION LAMP - WITH AIMING MOTOR
Disassembly and Assembly
INFOID:0000000009670496
WARNING:
Do not touch bulb while it is lit or right after being turned off. Burning may result.
CAUTION:
AWLIA2165ZZ
1.
Front combination lamp
2.
Side marker lamp bulb
3.
Side marker lamp socket
4.
Headlamp bulb
5.
Lock ring
6.
Front turn signal/Parking
lamp bulb socket
7.
Front turn signal/Parking lamp bulb
JMLIA3219ZZ
1.
Front combination lamp
2. Side marker lamp bulb
3. Side marker lamp bulb socket
4.
Lock ring
5. Front turn signal/parking lamp
bulb socket
6. Front turn signal/parking lamp
bulb
7.
Headlamp Bulb
8. Retaining spring
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст