Nissan Note E12. Manual — part 407
INSTRUMENT PANEL ASSEMBLY
IP-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
Removal and Installation
INFOID:0000000009567641
CAUTION:
• Be careful not to scratch instrument panel pad or other parts.
• Before servicing, turn the ignition switch off, disconnect both battery terminals and wait at least
three minutes.
• Do not tamper with or force air bag lid open, as this may adversely affect air bag performance.
REMOVAL
1. Disconnect the negative and positive battery terminals, then wait at least three minutes. Refer to
"Removal and Installation (Battery)"
.
2. Remove front pillar finishers (LH/RH). Refer to
INT-19, "FRONT PILLAR FINISHER : Removal and Instal-
.
3. Remove dash side finishers (LH/RH). Refer to
INT-22, "DASH SIDE FINISHER : Removal and Installa-
4. Partially remove front body side welts (LH/RH). Refer to
INT-22, "BODY SIDE WELT : Removal and
.
5. Release the pawls using a suitable tool (A) and then remove
instrument side finisher (LH) as shown.
: Pawl
6. Release the pawls using a suitable tool (A) and then remove
instrument side finisher (RH) as shown.
: Pawl
7. Remove center console lower. Refer to
IP-20, "Removal and Installation"
8. Remove steering wheel. Refer to
ST-8, "Removal and Installation"
9. Remove steering column covers. Refer to
IP-17, "Removal and Installation"
.
10. Remove combination switch. Refer to
EXL-112, "Removal and Installation"
11. Remove combination meter. Refer to
MWI-48, "Removal and Installation"
1.
Instrument side finisher (RH)
2.
Passenger air bag module
3.
Instrument panel assembly
4.
Instrument side finisher (LH)
5.
Side ventilator grille (LH)
6.
Combination meter
7.
Cluster lid A
8.
Instrument lower panel LH
9.
Steering column upper cover
10. Steering column lower cover
11. Steering lock escutcheon
12. Center console lower
13. Front air control finisher
14. Front air control
15. Center ventilator grille (RH)
16. Center ventilator grille (LH)
17. Cluster lid C
18. Audio unit/AV control unit
19. Glove box lid
20. Glove box assembly
21. Glove box striker
22. Side ventilator grille (RH)
23. Upper glove box
Pawl
Metal clip
Clip
AWJIA1130ZZ
AWJIA1131ZZ
IP-16
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
12. Remove audio unit. Refer to
AV-33, "Removal and Installation"
(DISPLAY AUDIO).
13. Remove AV control unit (NAVIGATION). Refer to
AV-178, "Removal and Installation"
.
14. Remove front air control. Refer to
HAC-47, "Removal and Installation"
15. Remove glove box assembly. Refer to
IP-25, "Removal and Installation"
16. Remove front passenger air bag module. Refer to
SR-17, "Removal and Installation"
17. Remove instrument panel assembly.
a. Remove instrument panel assembly screws (A).
b. Disconnect the harness connectors from the instrument panel assembly.
c.
Remove instrument panel assembly through passenger door opening.
CAUTION:
• Cover shift selector assembly with a shop cloth to prevent damage to instrument panel assem-
bly.
• When removing instrument panel assembly, two people are required to prevent from damage.
18. Removal of the following components is only necessary if replacing the instrument panel assembly.
• Side ventilator grille (LH/RH): Refer to
VTL-6, "SIDE VENTILATOR GRILLE : Removal and Installation"
.
• Center ventilator duct (LH/RH): Refer to
VTL-6, "CENTER VENTILATOR DUCT : Removal and Installa-
• Side defroster duct (LH/RH): Refer to
VTL-7, "SIDE DEFROSTER DUCT : Removal and Installation"
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
If replacing instrument panel, transfer all the necessary parts to the new instrument panel.
ALJIA1252ZZ
STEERING COLUMN COVERS
IP-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
STEERING COLUMN COVERS
Removal and Installation
INFOID:0000000009567642
REMOVAL
1. Remove instrument lower panel LH. Refer to
IP-24, "Removal and Installation"
2. Remove steering column cover screws (A).
NOTE:
Rotate steering wheel to access steering column cover screws.
3. Pull steering column upper cover (1) upward to disengage steer-
ing column upper cover pawls.
: Pawl
4. Remove steering column upper cover (1) and lower cover (2).
INSTALLATION
Installation is in the reverse order of removal.
AWJIA0707ZZ
IP-18
< REMOVAL AND INSTALLATION >
CENTER CONSOLE ASSEMBLY
CENTER CONSOLE ASSEMBLY
Exploded View
INFOID:0000000009567643
TYPE 1
TYPE 2
Removal and Installation
INFOID:0000000009567644
REMOVAL
1. Move shift selector to “N” position (CVT: RE0F11A).
2. Remove shift selector handle (5MT: RS5F91R). Refer to
.
3. Raise parking brake lever.
AWJIA1134ZZ
1.
Shift selector boot (5MT: RS5F91R) 2.
Center console assembly
3.
USB connector (if equipped)
4.
Power socket
A.
Clip
B.
Screw
AWJIA1135ZZ
1.
Shift selector boot (5MT: RS5F91R) 2.
Center console assembly
3.
Power socket
4.
USB connector (if equipped)
5.
Heated seat switch (RH) (if equipped)
6.
Heated seat switch (LH)
(if equipped)
A.
Clip
B.
Screw
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст