Nissan Note E12. Manual — part 408
CENTER CONSOLE ASSEMBLY
IP-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
4. Remove center console assembly clips (A).
5. Remove the center console assembly rear screws.
6. Slide driver side seat to the full rearward position and recline.
7. Slide passenger side seat to the full rearward position and recline.
8. Lift rear right corner of center console assembly, rotating slightly,
making sure to lift assembly upward over the parking brake han-
dle.
9. Disconnect the harness connectors from the center console
assembly.
10. Remove center console assembly.
INSTALLATION
Installation is in the reverse order of removal.
JMJIA6093ZZ
AWJIA0695ZZ
IP-20
< REMOVAL AND INSTALLATION >
CENTER CONSOLE LOWER
CENTER CONSOLE LOWER
Removal and Installation
INFOID:0000000009567645
REMOVAL
1. Remove center console assembly. Refer to
IP-18, "Removal and Installation"
2. Remove center console lower.
a. Remove center console lower clips (LH/RH) (A).
b. Release center console lower pawls using a suitable tool and
remove.
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
JMJIA6052ZZ
AWJIA0706ZZ
CLUSTER LID A
IP-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CLUSTER LID A
Removal and Installation
INFOID:0000000009567646
REMOVAL
1. Remove steering column covers. Refer to
IP-17, "Removal and Installation"
.
2. Remove cluster lid C. Refer to
IP-22, "Removal and Installation"
3. Remove cluster lid A.
a. Remove combination meter finisher and cluster lid A as an assembly by pulling rearward to release pawls
and metal clips.
b. Disconnect the harness connector and remove cluster lid A.
c. Separate cluster lid A (2) from combination meter finisher (1) by releasing the metal clips (If necessary).
INSTALLATION
Installation is in the reverse order of removal.
Pawl
Metal clip
AWJIA1075ZZ
IP-22
< REMOVAL AND INSTALLATION >
CLUSTER LID C
CLUSTER LID C
Removal and Installation
INFOID:0000000009567647
REMOVAL
1. Release the cluster lid C (1) clips using a suitable tool.
: Metal clip
2. Disconnect harness connectors from cluster lid C and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1231ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст