Nissan Note E12. Manual — part 319
FRONT GRILLE
EXT-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
FRONT GRILLE
Exploded View
INFOID:0000000009015852
Removal and Installation
INFOID:0000000009015853
REMOVAL
1. Remove the front grille finisher clips.
2. Release pawls using a suitable tool and remove the front grille finisher.
3. Release the clips using a suitable tool, then pull the front grille away from vehicle to release pawls and
remove.
4. Release pawls and remove front emblem from front grille (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
1.
Front grille finisher
2.
Front grille
3.
Front emblem
Pawl
Clip
AWKIA2553ZZ
EXT-22
< REMOVAL AND INSTALLATION >
COWL TOP
COWL TOP
Exploded View
INFOID:0000000009015856
1.
Cowl top side cover (RH)
2.
Front fender seal (RH)
3.
Cowl top extension
4.
EPT seal [t: 5.0 mm (0.197 in)]
5.
Cowl top cover seal
6.
Front fender seal (LH)
7.
One-way valve
8.
Cowl top cover
9.
Cowl top cover cap
10. Cowl top side cover (LH)
11. EPT seal [t: 3.0 mm (0.118 in)] 12. EPT seal [t: 15.0 mm (0.591 in)]
Front
Clip
Pawl
AWKIA2518ZZ
COWL TOP
EXT-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
Removal and Installation
INFOID:0000000009015857
REMOVAL
1. Remove front wiper arms (LH/RH). Refer to
WW-58, "Removal and Installation"
2. Remove cowl top side covers (LH/RH).
3. Remove cowl top cover clips.
4. Pull forward to release cowl top cover from windshield.
CAUTION:
When performing the procedure after removing cowl top
cover, cover the lower end of windshield with urethane, etc.
to prevent damage to the windshield.
5. Disconnect the washer tube connector and harness clips.
6. Remove cowl top cover.
7. Remove the following parts after removing cowl top cover (if necessary).
• EPT seals
• Cowl top cover seal
• Washer tube
• Washer nozzles (LH/RH). Refer to
WW-55, "WASHER NOZZLE : Removal and Installation"
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Always replace EPT seals with new ones when reusing the cowl top cover.
• When installing EPT seal (2) of portion (A) on cowl top cover (1), install EPT seal by aligning to the
line of (B) and setting portion (C) in cowl top cover.
• After installing cowl top cover (2), check that side surface of EPT seal (1) makes contact with wind-
shield glass (3).
JMKIA8047ZZ
JMKIB0738ZZ
JMKIB0739ZZ
EXT-24
< REMOVAL AND INSTALLATION >
FENDER PROTECTOR
FENDER PROTECTOR
Exploded View
INFOID:0000000009015858
Removal and Installation
INFOID:0000000009444684
REMOVAL
1. Remove fender protector screws and clips.
2. Remove fender protector.
INSTALLATION
Installation is in the reverse order of removal.
1.
Front fender protector
A. J nut
Front
AWKIA2513ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст