Nissan Pathfinder. Manual — part 317
DLK-34
< SYSTEM DESCRIPTION >
SYSTEM (INTELLIGENT KEY SYSTEM)
The timer function resets when the engine is started
*
.Operating period of timer function may differ depending
on battery size.
*
: Timer function does not stop if another Intelligent Key that has a different key ID is detected within the inte-
rior antenna detection area when starting the engine.
OPERATION CONDITION
If the following condition are satisfied, welcome light function is operated.
OUTSIDE KEY ANTENNA DETECTION AREA
The outside key antenna detection area of door lock/unlock function
is in the range of approximately 80 cm (31.50 in) surrounding the
driver, passenger door handles (1) and back door handle (2). How-
ever, this operating range depends on the ambient conditions.
WELCOME LIGHT FUNCTION SETTING
Welcome light function operation mode can be changed using CONSULT
With CONSULT
BCS-21, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
Without CONSULT
The welcome light function ON/OFF can be switched by performing the following operation.
1. Turn ignition switch: OFF
→ON
2. Press and hold the driver side door request switch for 5 seconds or more within 20 seconds after turning
the ignition switch ON.
3. The switching is complete when combination meter buzzer sounds.
WARNING FUNCTION
WARNING FUNCTION : System Description
INFOID:0000000009175623
OPERATION DESCRIPTION
The warning function are as per the following items and are given to the user as warning information and
warnings using combinations of Intelligent Key warning buzzer, combination meter buzzer, KEY warning lamp
and information display in combination meter.
• Intelligent Key system malfunction
• OFF position warning
• P position warning
• ACC warning
• Take away warning
• Door lock operation warning
• Engine start information
• Intelligent Key low battery warning
• Key ID warning
• Key ID verification information
OPERATION CONDITION
Once the following condition from below is established, alert or warning is executed.
Function
Operation condition
Welcome light function
• All door are closed.
• All doors are locked.
• Ignition switch: OFF position.
• Shift position: P (Park) position.
• Intelligent Key is outside the vehicle.
• Timer function is activated.
JMKIA5224ZZ
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-35
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
WARNING METHOD
The following table shows the alarm or warning methods with chime.
Warning/Information functions
Operation procedure
Intelligent Key system malfunction
When a malfunction is detected on BCM, “KEY” warning lamp illuminates.
OFF position warning
For internal
When condition A, B or condition C is satisfied
• Condition A
- Ignition switch: ACC position
- Door switch (driver side): ON (Door is open)
• Condition B
- Turn ignition switch from ON to OFF while door is open
• Condition C
- Intelligent Key backside is contacted to ignition switch while brake pedal
is depressed and ignition switch is LOCK or OFF (When the Intelligent
Key battery is discharged)
- Door switch (driver side): ON (Door is open)
For external
OFF position warning (For internal) is in active mode, driver side door is
closed.
NOTE:
OFF position (For external) active only when each of the sequence occurs
as below: P position warning
→ ACC warning → OFF position warning (For
internal)
→ OFF position warning (For internal)
P position warning
For internal
• Shift position: Except P (Park) position
• Engine is running to stopped (ignition switch is ON to OFF)
For external
Warning is activated when driver door is closed from the open position
while the P (Park) position warning (for inside vehicle) is ON.
ACC warning
• When P (Park) position warning is in active mode, shift position changes
P (Park) position
• Ignition switch: ACC position
Take away warning
Door is open to close
• Ignition switch: Except Lock position
• Door switch: ON to OFF (Door is open to close)
• Intelligent Key cannot be detected inside the vehicle
Door is open
• Ignition switch: Except Lock position
• Door switch: ON (Door is open)
• Key ID verification every 5 seconds when registered Intelligent Key can-
not be detected inside the vehicle
Push-button ignition
switch operation
• Ignition switch: Except Lock position
• Press push-button ignition switch
• Intelligent Key cannot be detected inside the vehicle
Door lock operation warning
When door lock operation is requested while door lock operating condition
of door request switch or Intelligent Key are not satisfied
Engine start information
Ignition switch is ON po-
sition
• Ignition switch: ON position
• Shift position: P (Park) position*
• Engine is stopped
Ignition switch is except
ON position
• Ignition switch: Except ON position
• Shift position: P (Park) position*
• Intelligent Key is inserted in key slot or Intelligent Key can be detected
inside the vehicle
Intelligent Key low battery warning
When Intelligent Key is low battery, BCM is detected after ignition switch is
turned ON
Key ID warning
When registered Intelligent Key cannot be detected inside the vehicle after
ignition switch is turned ON
Key ID verification information
• When registered Intelligent Key cannot be detected inside the vehicle
• Intelligent Key battery is discharged
• When NATS antenna amp cannot be detected NATS ID
DLK-36
< SYSTEM DESCRIPTION >
SYSTEM (INTELLIGENT KEY SYSTEM)
Warning/Information functions
“KEY”
warning
lamp
Information display
(combination meter)
Warning chime
Combination
meter buzzer
Intelligent Key
warning buzzer
Intelligent Key system malfunction
Indicate
—
—
—
OFF position
warning
For internal
—
—
Activate
—
For external
—
—
—
Activate
P position
warning
For internal
—
Activate
—
For external
—
Active
ACC warning
—
Activate
—
Take away
warning
Door is open to
close
—
Activate
Activate
Door is open
—
—
Push-button igni-
tion switch opera-
tion
Activate
—
Door lock op-
eration warn-
ing
Request switch
operation
—
—
—
Activate
Intelligent Key
—
—
—
Activate
Key ID warning
—
—
—
Engine start information
—
—
—
ALKIA2515GB
ALKIA2516GB
ALKIA2517GB
ALKIA2518GB
ALKIA2519GB
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-37
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
LIST OF OPERATION RELATED PARTS
Parts marked with
× are the parts related to operation.
Intelligent Key low battery warning
—
—
—
Key ID verification information
—
—
—
Warning/Information functions
“KEY”
warning
lamp
Information display
(combination meter)
Warning chime
Combination
meter buzzer
Intelligent Key
warning buzzer
ALKIA2520GB
ALKIA2521ZZ
Warning function
In
tel
lig
en
t K
ey
Ig
ni
tio
n switch
Doo
r swi
tch
Do
or re
qu
es
t s
w
itc
h
In
si
de ke
y an
ten
na
O
ut
sid
e ke
y ant
en
na
In
tel
lig
en
t Ke
y
warn
ing
b
uzze
r
Com
bi
nat
io
n m
et
er b
uz
ze
r
CAN communication
system
BC
M
In
form
a
tio
n d
ispl
ay
“KEY” w
a
rni
ng
lamp
Intelligent Key system malfunction
×
×
×
OFF position warning
For internal
×
×
×
×
For external
×
×
×
P (Park) position warning
×
×
×
×
×
×
ACC warning
×
×
×
×
×
Take away warning
Door is open or close
×
×
×
×
×
×
×
×
×
Door is open
×
×
×
×
×
×
×
Push-button ignition switch
operation
×
×
×
×
×
×
×
×
Door lock operation warning
×
×
×
×
×
×
×
Key ID warning
×
×
×
×
×
×
Engine start information
Ignition switch is ON position
×
×
×
×
×
×
Ignition switch is except ON
position
×
×
×
×
×
×
Intelligent Key low battery warning
×
×
×
×
×
×
Key ID verification information
×
×
×
×
×
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст