Nissan Pathfinder. Manual — part 316
DLK-30
< SYSTEM DESCRIPTION >
SYSTEM (INTELLIGENT KEY SYSTEM)
KEY REMINDER FUNCTION
KEY REMINDER FUNCTION : System Diagram
INFOID:0000000009175617
KEY REMINDER FUNCTION : System Description
INFOID:0000000009175618
Key reminder is the function that prevents the key from being left in the vehicle.
Key reminder has the following 3 functions.
Function
In
te
lli
ge
nt Key
Do
or swi
tch
Do
or l
o
ck ac
tu
at
or
F
ue
l l
id
loc
k ac
tu
ato
r
Pu
sh
-bu
tto
n i
gn
iti
on
swi
tch
CAN co
mm
un
ic
ati
on
sy
st
em
BCM
IPDM
E/R
Horn
Combination meter
Hazard warning lamp
Aut
om
ati
c ba
ck
do
or co
ntro
l m
o
du
le
Bac
k do
or l
o
ck a
sse
mb
ly
Door lock/unlock function
×
×
×
×
×
Selective unlock function
×
×
×
×
×
Auto door lock function
×
×
×
×
×
×
Hazard and horn reminder function
×
×
×
×
×
×
Automatic back door open/close function
×
×
×
×
×
Remote engine start function
×
×
×
×
×
×
×
×
×
×
ALKIA2862GB
Key remainder func-
tion
Operation condition
Operation
Driver door closed*
Right after driver side door is closed under the following conditions:
• Door lock operation is performed.
• Driver side door is open.
• Driver side door is in lock state.
All doors (except back door)
and fuel filler lid unlock.
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-31
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
*: If the door closing impact shocks the door lock knob or contacts against baggage with the door lock knob might activate the door locks
accidentally but unlock operation is performed in these cases.
CAUTION:
• The above function operates when the Intelligent Key is inside the vehicle. However, there may be
times when the Intelligent Key cannot be detected. This function does not operate when the Intelli-
gent Key is on the instrument panel, rear parcel shelf or in the glove box. Also, this system some-
times does not operate if the Intelligent Key is in the door pocket for the open door.
REMOTE ENGINE START FUNCTION
REMOTE ENGINE START FUNCTION : System Diagram
INFOID:0000000009175619
REMOTE ENGINE START FUNCTION : System Description
INFOID:0000000009175620
OPERATION
Remote keyless entry system controls operation of the following items.
• Door lock/unlock function
• Selective unlock function
• Auto door lock function
• Hazard and horn reminder function
• Automatic back door open/close function
• Remote engine start
OPERATION AREA
The remote engine start operating range is approximately 60 m (197 ft) from the vehicle.
REMOTE ENGINE START FUNCTION
Door is open or closed
Right after all doors are closed under the following conditions:
• Intelligent Key is inside the vehicle.
• Any door is open.
• All doors (except back door) are locked by door lock and unlock switch
or door lock knob.
• All doors (except back
door) and fuel filler lid un-
lock.
• Honk Intelligent Key warn-
ing buzzer.
Back door is closed
Right after back door is closed under the following conditions:
• Intelligent Key is inside vehicle.
• All doors (except for back door) are closed.
• All doors (except for back door) are locked.
• All doors (except for back
door) and fuel filler lid un-
lock.
• Back door can open with
back door opener switch.
• Honk Intelligent Key warn-
ing buzzer.
Key remainder func-
tion
Operation condition
Operation
ALKIA2863GB
DLK-32
< SYSTEM DESCRIPTION >
SYSTEM (INTELLIGENT KEY SYSTEM)
• When the lock button and then the remote engine start button of the Intelligent Key are pressed within 5 sec-
onds of each other, a start signal is transmitted from Intelligent Key to BCM via remote keyless entry
receiver.
• When the BCM receives the remote engine start signal, it locks all doors and the fuel lid, flashes the hazard
lamps and chirps the horn and the engine will then start.
• To exit the remote engine start mode from inside the vehicle, depress the brake pedal and press the push
button ignition switch at the same time.
• To cancel the remote engine start mode away from the vehicle, press the remote engine start button on the
Intelligent Key.
• Once the vehicle has been started using the remote engine start feature it will remain running for 10 minutes.
Extended run time can be added to the initial 10 minute running time by pressing the lock button and remote
engine start button within 5 seconds of each other. This will add an aditional 10 minutes of running time.
Extended time can only be added once, for a total run time of up to 20 minutes.
HAZARD AND HORN REMINDER FUNCTION
When remote engine start is initiated by Intelligent Key, BCM blinks hazard warning lamps as a reminder.
The hazard and horn reminder has a horn chirp mode (C mode) and a non-horn chirp mode (S mode).
Operating Function of Hazard and Horn Reminder
Hazard and horn reminder does not operate in the following conditions.
• Ignition switch position is ON.
• Door is open (only lock operation)
How to Change Hazard and Horn Reminder Mode
With CONSULT
Hazard and horn reminder operation mode can be changed using CONSULT.
BCS-21, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
Without CONSULT
When LOCK and UNLOCK signals are sent from the Intelligent Key for more than 2 seconds at the same time,
the hazard and horn reminder mode is changed and hazard warning lamp blinks and horn sounds as per the
following items:
LIST OF OPERATION RELATED PARTS
Parts marked with
× are the parts related to operation.
Remote engine start cancel opera-
tion
• Anti-theft alarm - unauthorized entry
• Maximum time for engine to run by remote start has been exceded.
• Hazard lamps are turned on.
• Push button start button is pressed without the Intelligent Key in the vehicle.
• Push button start button is pressed without depressing the brake pedal.
• The hood is opened while the remote engine start is engaged.
C mode
S mode
Intelligent Key operation
Lock
Unlock
Lock
Unlock
Hazard warning lamp blinks
Twice
Once
Twice
—
Horn sound
Once
—
—
—
JMKIA2755GB
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-33
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
WELCOME LIGHT FUNCTION
WELCOME LIGHT FUNCTION : System Diagram
INFOID:0000000009175621
WELCOME LIGHT FUNCTION : System Description
INFOID:0000000009175622
The welcome light function operates as per the following. When the Intelligent Key is within the outside key
antenna detection area, the BCM turns on interior room lamp
*
and operates heart beat operation of the push-
button ignition switch.
*: Settings for map lamp, foot lamp, personal lamp, and puddle lamp are available.
OPERATION DESCRIPTION
• When the BCM detects that the Intelligent Key is within the outside key antenna detection area. BCM trans-
mits the request signal to the Intelligent Key and check it is near the door.
• Intelligent Key receives the request signal and transmits the key ID signal to the BCM via remote keyless
entry receiver.
• BCM receives the key ID signal and compares it with the registered key ID.
• BCM illuminates lamps that are set, when key ID verification is OK.
TIMER FUNCTION
BCM can operate welcome light function using the timer function for 9 days after key switch is turned OFF.
Function
In
te
lli
ge
nt Key
Do
or swi
tch
Do
or l
o
ck ac
tu
at
or
F
ue
l l
id
loc
k ac
tu
ato
r
Pu
sh
-bu
tto
n i
gn
iti
on
swi
tch
CAN co
mm
un
ic
ati
on
sy
st
em
BCM
IPDM
E/R
Horn
Combination meter
Hazard warning lamp
Aut
om
ati
c ba
ck
do
or co
ntro
l m
o
du
le
Bac
k do
or l
o
ck a
sse
mb
ly
Door lock/unlock function
×
×
×
×
×
Selective unlock function
×
×
×
×
×
Auto door lock function
×
×
×
×
×
×
Hazard and horn reminder function
×
×
×
×
×
×
Automatic back door open/close function
×
×
×
×
×
Remote engine start function
×
×
×
×
×
×
×
×
×
×
ALKIA2864GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст