Nissan Pathfinder. Manual — part 753
LUGGAGE FLOOR TRIM
INT-31
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
3. Release the rear pillar finisher clips and pawls using a suitable
tool.
CAUTION:
Do not bend the sheet metal when removing the rear pillar
finisher from the sheet metal.
: Clip
: Pawl
4. Remove the rear pillar finisher (A) from the luggage side lower
finisher.
5. Remove the seat belt from the rear pillar finisher (A), then
remove the rear pillar finisher.
CAUTION:
Do not reuse rear pillar finisher.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse rear pillar finisher. Replace with new part for installation.
• Visually check the clip and pawls for deformation and damage during installation. Replace with new
ones if necessary.
• When installing rear pillar finisher, check that clips and pawls are securely placed in body panel
holes.
LUGGAGE SIDE LOWER FINISHER
LUGGAGE SIDE LOWER FINISHER : Removal and Installation
INFOID:0000000009176421
REMOVAL
1. Remove the storage box side finisher. Refer to
INT-33, "STORAGE BOX SIDE FINISHER : Removal and
.
2. Remove the third row seat. Refer to
SE-107, "Removal and Installation"
.
3. Remove the rear kicking plate. Refer to
INT-22, "KICKING PLATE : Removal and Installation - Rear Kick-
4. Partially remove the rear door welt.
5. Remove the seat belt bolt cover and bolt from the luggage side lower finisher.
6. Remove the seat belt from the luggage side lower finisher.
7. Remove the luggage side lower finisher coat hook bolt using a suitable tool.
8. Remove the luggage side lower finisher cover, then remove the
luggage side lower finisher bolt (A).
: Front
9. Disconnect the harness connector from power socket (LH only) and speakers (LH/RH) (if equipped).
10. Remove the luggage side lower finisher.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Visually check the clips and pawls for deformation and damage during installation. Replace with new
ones if necessary.
• When installing luggage side lower finisher, check that clips and pawls are securely placed in body
panel holes.
ALJIA0823ZZ
ALJIA0824ZZ
INT-32
< REMOVAL AND INSTALLATION >
LUGGAGE FLOOR TRIM
LUGGAGE SIDE UPPER FINISHER
LUGGAGE SIDE UPPER FINISHER : Removal and Installation
INFOID:0000000009176422
REMOVAL
1. Remove the luggage side upper finisher cover, then remove the
luggage side upper finisher bolt (A).
2. Remove rear pillar finisher. Refer to
INT-30, "REAR PILLAR FINISHER : Removal and Installation"
3. Remove back pillar finisher. Refer to
INT-32, "BACK PILLAR FINISHER : Removal and Installation"
.
4. Release the clips, then remove the luggage side upper finisher.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Visually check the clips for deformation and damage during installation. Replace with new ones if
necessary.
• When installing luggage side upper finisher, check that clips are securely placed in body panel
holes.
BACK PILLAR FINISHER
BACK PILLAR FINISHER : Removal and Installation
INFOID:0000000009176423
REMOVAL
1. Remove the luggage side lower finisher. Refer to
INT-31, "LUGGAGE SIDE LOWER FINISHER :
2. Release the back pillar finisher clips and pawl using a suitable
tool.
CAUTION:
Do not bend the sheet metal when removing the back pillar
finisher from the sheet metal.
: Clip
: Pawl
3. Remove the seat belt from the back pillar finisher (A), then
remove the back pillar finisher (A).
CAUTION:
Do not reuse back pillar finisher. Replace with new part
after removal.
ALJIA0825ZZ
ALJIA1095ZZ
LUGGAGE FLOOR TRIM
INT-33
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse back pillar finisher. Replace with new part for installation.
• Visually check the clips for deformation and damage during installation. Replace with new ones if
necessary.
• When installing back pillar finisher, check that the clips and pawl are securely placed in body panel
holes.
STORAGE BOX
STORAGE BOX : Removal and Installation
INFOID:0000000009176424
REMOVAL
1. Release the clips that retain the seat back board to the storage box lid.
2. Open the storage box lid.
3. Remove the subwoofer from the storage box (if equipped). Refer to
AV-379, "Removal and Installation"
[MID AUDIO SYSTEM - WITH BOSE AUDIO SYSTEM] or
AV-625, "Removal and Installation"
[PREMIUM
AUDIO SYSTEM - WITH NAVIGATION].
4. Remove the back door kicking plate. Refer to
INT-36, "BACK DOOR KICKING PLATE : Removal and
5. Remove the storage box screws and the storage box.
INSTALLATION
Installation is in the reverse order of removal.
STORAGE BOX SIDE FINISHER
STORAGE BOX SIDE FINISHER : Removal and Installation
INFOID:0000000009176425
REMOVAL
1. Remove the storage box. Refer to
INT-33, "STORAGE BOX : Removal and Installation"
2. Release the clips using a suitable tool, then remove the storage box side finisher.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Visually check the clips for deformation and damage during installation. Replace with new ones if
necessary.
• When installing storage box side finisher, check that the clips and pawls are securely placed in body
panel holes.
INT-34
< REMOVAL AND INSTALLATION >
BACK DOOR TRIM
BACK DOOR TRIM
Exploded View
INFOID:0000000009176426
BACK DOOR UPPER FINISHER
BACK DOOR UPPER FINISHER : Removal and Installation
INFOID:0000000009176427
REMOVAL
1. Release the back door upper finisher metal clips using a suitable
tool, then remove the back door upper finisher.
: Metal clip
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Visually check the metal clips for deformation and damage during installation. Replace with new
ones if necessary.
1.
Back door upper finisher
2.
Back door side finisher (RH)
3.
Back door lower finisher
4.
Back door switch
5.
Back door kicking plate
6.
Back door pull handle
7.
Back door side finisher (LH)
Front
ALJIA0828ZZ
ALJIA0826ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст