Nissan Pathfinder. Manual — part 751
BODY SIDE TRIM
INT-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
1. Release the rear kicking plate clips and pawls using a suitable
tool.
: Clip
: Pawl
: Front
2. Remove the rear kicking plate.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Visually check the clips and pawls for deformation and damage during installation. Replace with new
ones if necessary.
• When installing rear kicking plate, check that the clips and pawls are securely placed in body panel
holes.
ALJIA0813ZZ
INT-24
< REMOVAL AND INSTALLATION >
FLOOR TRIM
FLOOR TRIM
Exploded View
INFOID:0000000009176415
Removal and Installation
INFOID:0000000009176416
FRONT FLOOR TRIM
Removal
CAUTION:
Before servicing, turn the ignition switch off, disconnect both battery cables and wait at least three
minutes.
1. Disconnect the negative battery terminal, then wait at least three minutes. Refer to
2. Remove the front kicking plates (LH/RH). Refer to
INT-22, "KICKING PLATE : Removal and Installation -
.
3. Remove the rear kicking plates (LH/RH). Refer to
INT-22, "KICKING PLATE : Removal and Installation -
4. Remove the front seat assemblies (LH/RH). Refer to
SE-86, "Removal and Installation"
.
1.
Front floor trim cover
2.
Front floor trim
1.
Rear floor trim
A.
Front floor trim bracket
Front
AWJIA1174ZZ
FLOOR TRIM
INT-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
5. Remove the rear blower motor 1 unit assembly. Refer to
VTL-20, "REAR BLOWER MOTOR 1 UNIT
ASSEMBLY : Removal and Installation"
6. Remove the front floor connecting duct (LH/RH). Refer to
VTL-11, "FRONT FLOOR DUCT : Removal and
Installation - Front Floor Connecting Duct"
.
7. Remove the instrument panel lower bracket bolt and screw, then reposition bracket as necessary to
remove floor trim.
8. Remove the center console brace bolts and remove. Refer to
9. Remove the second row seats. Refer to
SE-94, "Removal and Installation"
.
10. Remove the front floor trim.
Installation
Installation is in the reverse order of removal.
REAR FLOOR TRIM
Removal
1. Disconnect the negative battery terminal, then wait at least three minutes. Refer to
2. Remove the back door kicking plate. Refer to
INT-36, "BACK DOOR KICKING PLATE : Removal and
3. Remove the luggage side lower finishers (LH/RH). Refer to
INT-31, "LUGGAGE SIDE LOWER FINISHER
4. Remove the rear floor trim.
Installation
Installation is in the reverse order of removal.
INT-26
< REMOVAL AND INSTALLATION >
HEADLINING
HEADLINING
Exploded View
INFOID:0000000009176417
With moonroofs
AWJIA1156ZZ
1.
Headlining
2.
Rear assist grip (RH)
3.
Personal lamp (RH)
4.
Front assist grip (RH)
5.
Sun visor (RH)
6.
Front room/map lamp assembly
7.
Headlining access cover
8.
Sun visor (LH)
9.
Front assist grip (LH)
10. Personal lamp (LH)
11. Rear assist grip (LH)
12. Cargo lamp
A.
Magnetic clip
Front
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст