Nissan Pathfinder. Manual — part 5
ADP-12
< SYSTEM DESCRIPTION >
SYSTEM
WITHOUT AROUND VIEW MONITOR
AUTOMATIC DRIVE POSITIONER SYSTEM : System Description
INFOID:0000000009176523
OUTLINE
The system automatically moves the driver seat, steering column (if equipped) and door mirror position by the
driver seat control unit and the automatic drive positioner control unit. The driver seat control unit corresponds
with the automatic drive positioner control unit by UART communication.
ALJIA1262GB
SYSTEM
ADP-13
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
NOTE:
The lumbar support system is controlled independently with no link to the automatic drive positioner system.
MANUAL FUNCTION
Function Description
Manual function
The driving position (seat, steering column and door mirror position) can be adjusted
by using the power seat switch, ADP steering switch or door mirror remote control
switch.
Memory function
The seat, steering column and door mirror move to the stored driving position by
pressing seat memory switch (1 or 2).
Entry/Exit assist function
Exit
On exit, the seat moves backward and the steering column moves upward.
Entry
On entry, the seat and steering column returns from exiting position to the previous
driving position.
Intelligent Key interlock function
Perform memory operation, exiting operation and entry operation by Intelligent Key
unlock operation or driver side door request switch unlock operation.
ADP-14
< SYSTEM DESCRIPTION >
SYSTEM
MANUAL FUNCTION : System Diagram
INFOID:0000000009176524
WITH AROUND VIEW MONITOR
JMJIA3774GB
SYSTEM
ADP-15
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
WITHOUT AROUND VIEW MONITOR
MANUAL FUNCTION : System Description
INFOID:0000000009176525
OUTLINE
The driving position (seat, steering column and door mirror position) can be adjusted manually with power seat
switch, ADP steering switch (if equipped) and door mirror remote control switch.
OPERATION PROCEDURE
1. Turn ignition switch ON.
2. Operate power seat switch, ADP steering switch or door mirror remote control switch.
3. The driver seat, steering column or door mirror operates according to the operation of each switch.
DETAIL FLOW
Seat
Tilt and Telescopic (if equipped)
JMJIA5855GB
Order
Input
Output
Control unit condition
1
Power seat switch
(sliding, lifting, reclin-
ing)
—
The power seat switch signal is inputted to the driver seat control
unit when the power seat switch is operated.
2
—
Motors
(sliding LH, lifting LH,
reclining LH)
The driver seat control unit outputs signals to each motor accord-
ing to the power seat switch input signal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст