Nissan Pathfinder. Manual — part 760
CLUSTER LID C
IP-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
1. Release cluster lid C finisher pawls using a suitable tool and
remove.
: Pawl
2. Remove cluster lid C screw (A).
3. Release cluster lid C clips and pawls using a suitable tool.
: Metal clip
: Pawl
4. Disconnect the harness connectors from cluster lid C and remove.
5. Remove screws (A) and separate cluster lid C (1) from multi-
function switch assembly (2) (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1086ZZ
ALJIA1085ZZ
ALJIA1084ZZ
IP-24
< REMOVAL AND INSTALLATION >
CLUSTER LID D
CLUSTER LID D
Removal and Installation
INFOID:0000000009176448
REMOVAL
1. Remove cluster lid C. Refer to
IP-22, "CLUSTER LID C : Removal and Installation"
2. Remove cluster lid D screws (A).
3. Release cluster lid D clips and pawls using a suitable tool and
remove.
: Metal clip
: Pawl
4. Remove center ventilator grille (LH/RH) from cluster lid D (if necessary). Refer to
TILATOR GRILLE : Removal and Installation"
.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1087ZZ
ALJIA1088ZZ
INSTRUMENT LOWER PANEL LH
IP-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
INSTRUMENT LOWER PANEL LH
Removal and Installation
INFOID:0000000009176449
REMOVAL
1. Remove instrument side finisher (LH) (1) using a suitable tool.
2. Remove instrument lower panel LH screw (A).
3. Remove hood lock release handle from instrument lower panel LH. Refer to
4. Remove data link connector from instrument lower panel LH.
5. Release instrument lower panel LH clips and pawls using a suit-
able tool.
: Metal clip
: Pawl
6. Disconnect aspiriator hose from instrument lower panel LH.
7. Disconnect the harness connectors and remove instrument lower panel LH.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA0335ZZ
ALJIA1259ZZ
ALJIA1089ZZ
IP-26
< REMOVAL AND INSTALLATION >
GLOVE BOX ASSEMBLY
GLOVE BOX ASSEMBLY
Removal and Installation
INFOID:0000000009176450
REMOVAL
1. Remove instrument side finisher (RH) using a suitable tool.
2. Remove glove box assembly lower screws (A).
3. Open glove box lid, then remove the glove box assembly upper
screws (A).
4. Disconnect the harness connectors from the glove box assembly and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1260ZZ
ALJIA1261ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст