Nissan Pathfinder. Manual — part 19
ADP-68
< WIRING DIAGRAM >
AUTOMATIC DRIVE POSITIONER SYSTEM
ABJIA0818GB
DIAGNOSIS AND REPAIR WORK FLOW
ADP-69
< BASIC INSPECTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000009176543
WORK FLOW
DETAILED FLOW
ALKIA0538GB
ADP-70
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORK FLOW
1.
GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the condition and the environment when
the incident/malfunction occurred).
>> GO TO 2.
2.
CHECK DTC WITH AUTOMATIC DRIVE POSITIONER SYSTEM
Check “Self Diagnostic Result” with CONSULT.
Is any symptom described and any DTC is displayed?
Symptom is described, DTC is displayed.>>GO TO 3.
Symptom is not described, DTC is displayed.>>GO TO 7.
Symptom is described, DTC is not displayed.>>GO TO 4.
3.
CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer.
>> GO TO 7.
4.
CONFIRM THE SYMPTOM
Try to confirm the symptom described by the customer.
>> GO TO 5.
5.
CHECK NORMAL OPERATING CONDITION
Check normal operating condition. Refer to
.
Is the incident normal operation?
YES
>> Inspection End.
NO
>> GO TO 6.
6.
PERFORM BASIC INSPECTION
Isolate the malfunctioning point with a basic inspection.
>> GO TO 8.
7.
PERFORM DTC CONFIRMATION PROCEDURE
Perform the confirmation procedure for the detected DTC.
Is the DTC displayed?
YES
>> GO TO 9.
NO
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
8.
PERFORM COMPONENT FUNCTION CHECK
Perform the component function check for the isolated malfunctioning point.
>> GO TO 9.
9.
DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Isolate the malfunctioning point by performing the diagnosis procedure relevant to the symptom during the
component diagnosis.
>> GO TO 10.
10.
REPAIR OR REPLACE
Repair or replace the malfunctioning part.
DIAGNOSIS AND REPAIR WORK FLOW
ADP-71
< BASIC INSPECTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
>> GO TO 11.
11.
FINAL CHECK
Perform the DTC confirmation procedure (if DTC is detected) or component function check (if no DTC is
detected) again, and then check that the malfunction can be repaired securely.
Are all malfunctions corrected?
YES
>> Inspection End.
Symptom is detected.>> GO TO 4.
DTC is detected.>> GO TO 7.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст