Nissan Pathfinder. Manual — part 875
MWI-72
< SYMPTOM DIAGNOSIS >
THE FUEL GAUGE INDICATOR DOES NOT OPERATE
SYMPTOM DIAGNOSIS
THE FUEL GAUGE INDICATOR DOES NOT OPERATE
Description
INFOID:0000000009174283
Fuel gauge will not indicate from a certain position.
Diagnosis Procedure
INFOID:0000000009174284
1.
CHECK COMBINATION METER INPUT SIGNAL
Perform component function check. Refer to
MWI-65, "Component Function Check"
.
Does monitor value match fuel gauge reading?
YES
>> GO TO 2.
NO
>> Replace combination meter. Refer to
MWI-82, "Removal and Installation"
2.
CHECK FUEL LEVEL SENSOR UNIT CIRCUITS
Check the fuel level sensor circuits. Refer to
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness or connectors.
3.
CHECK FUEL LEVEL SENSOR UNIT
Perform a unit check for the fuel level sensor unit. Refer to
MWI-66, "Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace fuel level sensor unit. Refer to
FL-6, "Removal and Installation"
.
4.
CHECK FLOAT INTERFERENCE
Check that the float arm does not interfere with or binds to other components in the fuel tank.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-82, "Removal and Installation"
NO
>> Repair or replace malfunctioning parts.
MWI
THE ILLUMINATION CONTROL SWITCH IS INOPERATIVE
MWI-73
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE ILLUMINATION CONTROL SWITCH IS INOPERATIVE
Description
INFOID:0000000009174285
The illumination control switch is inoperative when pressed.
Diagnosis Procedure
INFOID:0000000009174286
1.
CHECK ILLUMINATION CONTROL SWITCH CIRCUIT
Check the illumination control switch circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connectors.
2.
CHECK ILLUMINATION CONTROL SWITCH
Perform a unit check for the illumination control switch. Refer to
MWI-61, "Component Inspection"
.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-82, "Removal and Installation"
NO
>> Replace illumination control switch. Refer to
MWI-74
< SYMPTOM DIAGNOSIS >
THE TRIP RESET SWITCH IS INOPERATIVE
THE TRIP RESET SWITCH IS INOPERATIVE
Description
INFOID:0000000009174287
The trip reset switch is inoperative when pressed.
Diagnosis Procedure
INFOID:0000000009174288
1.
CHECK TRIP RESET SWITCH CIRCUIT
Check the trip reset switch circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connectors.
2.
CHECK TRIP RESET SWITCH
Perform a unit check for the trip reset switch. Refer to
MWI-63, "Component Inspection"
.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-82, "Removal and Installation"
NO
>> Replace trip reset switch. Refer to
MWI
THE OIL PRESSURE WARNING CONTINUES DISPLAYING, OR DOES NOT DIS-
PLAY
MWI-75
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE OIL PRESSURE WARNING CONTINUES DISPLAYING, OR DOES
NOT DISPLAY
Description
INFOID:0000000009174289
• The low oil pressure warning message stays on when oil pressure is normal.
• The low oil pressure warning message stays off when oil pressure is low.
Diagnosis Procedure
INFOID:0000000009174290
1.
CHECK COMBINATION METER INPUT
1. Start the engine and select METER/M&A on CONSULT.
2. Observe OIL W/L DATA MONITOR and the operation of the low oil pressure warning message in the
information display.
Is the inspection result normal?
YES
>> Perform ECM self-diagnosis. Refer to
.
NO
>> Replace combination meter. Refer to
MWI-82, "Removal and Installation"
Component
Condition
CONSULT
Low oil pressure warning message
Engine running
OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст