Nissan Pathfinder. Manual — part 876
MWI-76
< SYMPTOM DIAGNOSIS >
THE PARKING BRAKE RELEASE WARNING CONTINUES DISPLAYING, OR
DOES NOT DISPLAY
THE PARKING BRAKE RELEASE WARNING CONTINUES DISPLAYING,
OR DOES NOT DISPLAY
Description
INFOID:0000000009174291
• The parking brake warning is displayed during vehicle travel even though the parking brake is released.
• The parking brake warning is not displayed even though driving the vehicle with the parking brake applied.
Diagnosis Procedure
INFOID:0000000009174292
1.
CHECK PARKING BRAKE WARNING LAMP OPERATION
1. Start engine.
2. Check the operation of the brake warning lamp while operating the parking brake.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-82, "Removal and Installation"
NO
>> GO TO 2.
2.
CHECK PARKING BRAKE SWITCH SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Check the parking brake switch signal circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness or connectors.
3.
CHECK PARKING BRAKE SWITCH UNIT
Perform a unit check for the parking brake switch. Refer to
MWI-69, "Component Inspection"
.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-82, "Removal and Installation"
NO
>> Replace parking brake switch. Refer to
.
Condition
Warning lamp status
Parking brake applied
ON
Parking brake released
OFF
MWI
THE LOW WASHER FLUID WARNING CONTINUES DISPLAYING, OR DOES
NOT DISPLAY
MWI-77
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE LOW WASHER FLUID WARNING CONTINUES DISPLAYING, OR
DOES NOT DISPLAY
Description
INFOID:0000000009174293
• The warning is still displayed even after washer fluid is added.
• The warning is not displayed even though the washer tank is empty.
Diagnosis Procedure
INFOID:0000000009174294
1.
CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT
Check the washer fluid level switch signal circuit. Refer to
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness or connectors.
2.
CHECK WASHER FLUID LEVEL SWITCH UNIT
Perform a unit check for the washer fluid level switch. Refer to
MWI-67, "Component Inspection"
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-82, "Removal and Installation"
NO
>> Replace washer fluid level switch. Refer to
WW-57, "Removal and Installation"
.
MWI-78
< SYMPTOM DIAGNOSIS >
THE DOOR OPEN WARNING CONTINUES DISPLAYING, OR DOES NOT DIS-
PLAY
THE DOOR OPEN WARNING CONTINUES DISPLAYING, OR DOES NOT
DISPLAY
Description
INFOID:0000000009174295
• The door open warning is displayed even though all of the doors are closed.
• The door open warning is not displayed even though a door is ajar.
Diagnosis Procedure
INFOID:0000000009174296
1.
CHECK BCM INPUT SIGNAL
Check the BCM input signal. Refer to
DLK-170, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK COMBINATION METER INPUT SIGNAL
Select the METER/M&A Data Monitor and check the DOOR W/L monitor value.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-82, "Removal and Installation"
NO
>> Replace BCM. Refer to
BCS-80, "Removal and Installation"
3.
CHECK DOOR SWITCH SIGNAL CIRCUIT
Check the door switch signal circuit. Refer to
DLK-170, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harness or connectors.
4.
CHECK DOOR SWITCH
Perform a unit check for the door switch. Refer to
DLK-171, "Component Inspection"
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-82, "Removal and Installation"
NO
>> Replace applicable door switch. Refer to
DLK-313, "Removal and Installation"
.
DOOR W/L
Door open
: On
Door closed
: Off
MWI
THE LIFTGATE OPEN WARNING CONTINUES DISPLAYING, OR DOES NOT
DISPLAY
MWI-79
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE LIFTGATE OPEN WARNING CONTINUES DISPLAYING, OR DOES
NOT DISPLAY
Description
INFOID:0000000009174297
• The liftgate open warning is displayed continuously even though the liftgate is closed.
• The liftgate open warning is not displayed even though the liftgate is open.
Diagnosis Procedure
INFOID:0000000009174298
1.
CHECK BCM INPUT SIGNAL
Check the BCM input signal. Refer to
DLK-172, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK COMBINATION METER INPUT SIGNAL
Select the METER/M&A Data Monitor and check the DOOR W/L monitor value.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-82, "Removal and Installation"
NO
>> Replace BCM. Refer to
BCS-80, "Removal and Installation"
3.
CHECK BACK DOOR SWITCH SIGNAL CIRCUIT
Check the back door switch signal circuit. Refer to
DLK-172, "Diagnosis Procedure (With Power Back Door)"
DLK-173, "Diagnosis Procedure (Without Power Back Door)"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harness or connector.
4.
CHECK BACK DOOR SWITCH
Perform a unit check for the back door switch. Refer to
DLK-174, "Component Inspection (With Power Back
or
DLK-175, "Component Inspection (Without Power Back Door)"
.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-82, "Removal and Installation"
NO
>> Replace back door switch. Refer to
DLK-308, "DOOR LOCK : Removal and Installation"
DOOR W/L
Open
: On
Closed
: Off
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст