Nissan Pathfinder. Manual — part 749
FRONT DOOR FINISHER
INT-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
REMOVAL AND INSTALLATION
FRONT DOOR FINISHER
Exploded View
INFOID:0000000009176403
Removal and Installation
INFOID:0000000009176404
REMOVAL
1. Release pawls using a suitable tool and remove armrest cover
(A).
: Pawl
2. Remove the front door finisher bolts.
3. Remove the inside door handle escutcheon using a suitable tool, then remove the front door finisher bolt.
CAUTION:
Do not reuse inside door handle escutcheon. Replace with new part after removal.
4. Remove the step lamp (if equipped). Refer to
INL-64, "Removal and Installation"
.
5. Remove the main power window and door lock/unlock switch or power windows and door lock/unlock
switch RH. Refer to
PWC-62, "Removal and Installation"
[MAIN POWER WINDOW AND DOOR LOCK/
UNLOCK SWITCH - LH FRONT ONLY AUTO DOWN],
PWC-63, "Removal and Installation"
[POWER
WINDOW AND DOOR LOCK/UNLOCK SWITCH RH - LH FRONT ONLY AUTO DOWN],
[MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH - LH & RH
FRONT AUTO UP/DOWN] or
PWC-138, "Removal and Installation"
[POWER WINDOW AND DOOR
LOCK/UNLOCK SWITCH RH - LH & RH FRONT AUTO UP/DOWN].
1.
Front door finisher
2.
Inside door pull handle bracket 3.
Front step lamp
4.
Inside door handle escutcheon
5.
Armrest cover
Clip
Pawl
AWJIA1171ZZ
AWJIA1147ZZ
INT-16
< REMOVAL AND INSTALLATION >
FRONT DOOR FINISHER
6. Release the front door finisher clips and pawls using a suitable tool.
7. Disconnect the harness connector from the front door finisher.
8. Disconnect the door lock cable and inside door handle cable from front door finisher.
9. Remove the front door finisher.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse inside door handle escutcheon. Replace with new part after removal.
• Visually check the clips and pawls for deformation and damage during installation. Replace with new
ones if necessary.
• When installing front door finisher, check that clips and pawls are securely placed in body panel
holes.
REAR DOOR FINISHER
INT-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
REAR DOOR FINISHER
Exploded View
INFOID:0000000009176405
Removal and Installation
INFOID:0000000009176406
REMOVAL
1. Release pawls using a suitable tool and remove armrest cover
(A).
: Pawl
2. Remove the rear door finisher bolts.
3. Remove the inside door handle escutcheon using a suitable tool, then remove rear door finisher bolt.
CAUTION:
Do not reuse inside door handle escutcheon. Replace with new part after removal.
4. Remove the rear power window switch. Refer to
PWC-64, "Removal and Installation"
.
5. Release the rear door finisher clips and pawls using a suitable tool.
6. Disconnect the harness connector from the rear door finisher.
7. Disconnect the door lock cable and inside door handle cable from the rear door finisher.
8. Remove the rear door finisher.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse inside door handle escutcheon. Replace with new part after removal.
1. Rear door finisher
2.
Inside door handle escutcheon 3.
Armrest cover
4. Rear door cup holder
5.
Rear door cup holder mat
Clip
Pawl
AWJIA1151ZZ
AWJIA1147ZZ
INT-18
< REMOVAL AND INSTALLATION >
REAR DOOR FINISHER
• Visually check the clips and pawls for deformation and damage during installation. Replace with new
ones if necessary.
• When installing rear door finisher, check that clips and pawls are securely placed in body panel
holes.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст