Nissan Pathfinder. Manual — part 91
AV
DISPLAY UNIT
AV-191
< REMOVAL AND INSTALLATION >
[MID AUDIO WITHOUT BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DISPLAY UNIT
Exploded View
INFOID:0000000009174502
Removal and Installation
INFOID:0000000009174503
REMOVAL
1. Remove cluster lid D. Refer to
IP-24, "Removal and Installation"
2. Remove the display unit screws, then pull out the display unit and bracket.
3. Disconnect the harness connector from the display unit and remove.
4. Remove the display unit bracket screws and the display unit from the display unit bracket (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
1.
Display unit
2.
Display unit bracket
A. Display unit bracket screws
ALNIA1430ZZ
AV-192
< REMOVAL AND INSTALLATION >
[MID AUDIO WITHOUT BOSE]
FRONT DOOR SPEAKER
FRONT DOOR SPEAKER
Exploded View
INFOID:0000000009763103
Removal and Installation
INFOID:0000000009763102
REMOVAL
1. Remove the front door finisher. Refer to
INT-15, "Removal and Installation"
2. Remove the front door speaker bolts.
3. Pull out the front door speaker from the speaker bracket.
4. Disconnect the harness connector from front door speaker and remove.
5. Remove the speaker bracket bolts and the speaker bracket from front door (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1329ZZ
1. Speaker bracket bolt
2. Front door speaker
3. Speaker bolt
4. Speaker bracket
AV
INSTRUMENT PANEL SPEAKER/TWEETER
AV-193
< REMOVAL AND INSTALLATION >
[MID AUDIO WITHOUT BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
INSTRUMENT PANEL SPEAKER/TWEETER
Removal and Installation
INFOID:0000000009763104
REMOVAL
1. Remove instrument panel tweeter grille. Refer to
2. Remove the bolts (A), then pull out the instrument panel tweeter
(1).
3. Disconnect the harness connector from the instrument panel
tweeter (1) and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1423ZZ
AV-194
< REMOVAL AND INSTALLATION >
[MID AUDIO WITHOUT BOSE]
REAR DOOR SPEAKER
REAR DOOR SPEAKER
Exploded View
INFOID:0000000009763106
Removal and Installation
INFOID:0000000009763105
REMOVAL
1. Remove the rear door finisher. Refer to
INT-17, "Removal and Installation"
.
2. Remove the rear door speaker bolts.
3. Disconnect the harness connector from the rear door speaker and remove.
4. Remove the speaker bracket bolts and the speaker bracket from the rear door (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
1. Speaker bracket bolt
2. Rear door speaker
3. Speaker bolt
4. Speaker bracket
ALNIA1330ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст