Nissan Pathfinder. Manual — part 744
FOOT LAMP
INL-63
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
PASSENGER SIDE : Exploded View
INFOID:0000000009175463
PASSENGER SIDE : Bulb Replacement
INFOID:0000000009175464
WARNING:
Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.
CAUTION:
• Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from
bulb surface.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may
affect the performance of lamp.
1. Reach under instrument panel on RH side, locate foot lamp socket, rotate the bulb socket and remove.
2. Grasp the bulb and pull straight out of the bulb socket to remove.
3. Install foot lamp bulb to bulb socket.
4. Insert bulb socket into instrument panel substrate and rotate to lock in position.
1.
Bulb
2.
Bulb socket
3.
Instrument panel substrate
Front
ALLIA1086ZZ
INL-64
< REMOVAL AND INSTALLATION >
FRONT STEP LAMP
FRONT STEP LAMP
Exploded View
INFOID:0000000009175465
Removal and Installation
INFOID:0000000009175466
REMOVAL
1. Insert a suitable tool into the gap between the front step lamp and front door finisher and gently release
the pawls and the front step lamp.
2. Disconnect the harness connector from the front step lamp and remove.
INSTALLATION
Installation is in the reverse order of removal.
Bulb or Lens Replacement
INFOID:0000000009175467
WARNING:
Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.
CAUTION:
• Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from
bulb surface.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may
affect the performance of lamp.
1. Remove the front step lamp. Refer to
INL-64, "Removal and Installation"
.
2. Grasp the bulb and pull straight out from the front step lamp to remove.
3. Install the front step lamp bulb to front step lamp.
4. Install the front step lamp. Refer to
INL-64, "Removal and Installation"
1.
Step lamp harness connector
2.
Step lamp
3.
Bulb
ALLIA1087ZZ
PERSONAL LAMP
INL-65
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
PERSONAL LAMP
Removal and Installation
INFOID:0000000009175469
REMOVAL
The personal lamp is serviced as part of headlining. Refer to
INT-27, "Removal and Installation"
Bulb or Lens Replacement
INFOID:0000000009175470
WARNING:
Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.
CAUTION:
• Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from
bulb surface.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may
affect the performance of lamp.
• Do not attempt to separate the personal lamp from the headlining or damage may occur.
1. Insert a suitable tool into the gap between the lens and personal lamp, then gently release the lens pawls
and remove.
2. Grasp the bulb and pull straight out from its socket to remove.
3. Install personal lamp bulb to personal lamp.
4. Install the personal lamp lens.
INL-66
< REMOVAL AND INSTALLATION >
CARGO LAMP
CARGO LAMP
Exploded View
INFOID:0000000009175471
Removal and Installation
INFOID:0000000009175472
REMOVAL
1. Insert a suitable tool into the gap between the headlining and cargo lamp and gently release the metal
clips and remove.
2. Disconnect the harness connector from cargo lamp.
INSTALLATION
Installation is in the reverse order of removal.
Bulb or Lens Replacement
INFOID:0000000009175473
WARNING:
Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.
CAUTION:
• Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from
bulb surface.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may
affect the performance of lamp.
• Release and insert pawl as indicated in exploded view or damage may occur.
1. Beginning at the switch end, insert a suitable tool into the gap between the lens and cargo lamp, then gen-
tly release the lens pawls and remove.
2. Push the tab to release one bulb end, then grasp the bulb and pull out the second end from its socket to
remove.
3. Install cargo lamp bulb to cargo lamp.
4. Insert pawl at the end opposite the switch first, then insert the remaining two pawls to lock the lens in posi-
tion.
1.
Cargo lamp
2.
Bulb
3.
Lens
A.
Pawls to release first for lens re-
moval
B.
Pawl to install first for lens in-
stallation
Pawl
Metal clip
AWLIA2174ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст